H.1 General
36.521-13GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Part 1: Conformance testingRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
This annex specifies the uplink physical channels that are needed for setting a connection and channels that are needed during a connection. Table H.1-1 describes the mapping of uplink physical channels and signals to physical resources for FDD. Table H.1-2 describes the mapping of uplink physical channels and signals to physical resources for TDD.
Table H.1-1: Mapping of uplink physical channels and signals to physical resources for FDD
|
Physical channel |
Time Domain Location |
Frequency Domain Location |
Note |
|
PRACH |
Allowed for the parameter prach-Configuration Index provided by higher layers |
Allowed for the parameter prach-FrequencyOffset provided by higher layers |
Mapping rule is specified in TS 36.211 [8] Section 5.7.1 |
|
DMRS |
For PUCCH: Symbols 2 to 4 of each slot (PUCCH format: 1, 1a, 1b) Symbol 1 and 5 of each slot (PUCCH format: 2, 2a, 2b) For PUSCH: Symbol 3 of each slot |
Uplink system bandwidth dependent. |
Mapping rule of DMRS for PUCCH is specified in TS 36.211 [8] 5.5.2.2.2 Mapping rule of DMRS for PUSCH is specified in TS 36.211 [8] 5.5.2.1.2 |
|
PUCCH |
Slot 0 and 1 of each subframe |
Each 12 subcarriers of both ends of the bandwidth |
Mapping rule is specified in TS 36.211 [8] Section 5.4.3 |
|
PUSCH |
All remaining SC-FDMA symbols of each subframe not allocated to DMRS |
RBs allocated according to Reference Measurement channel in Annex A.2 |
Mapping rule is specified in TS 36.211 [8] Section 5.4.2 |
|
SRS |
Allowed for the cell-specific parameter srs-BandwidthConfig and the UE-specific parameter srs-Bandwidth provided by higher layers |
Allowed for the cell-specific parameter srsMaxUpPt and the UE-specific parameter transmissionComb or transmissionComb-ap provided by higher layers |
Mapping rule is specified in TS 36.211 [8] Section 5.5.3.2 |
Table H.1-2: Mapping of uplink physical channels and signals to physical resources for TDD
|
Physical channel |
Time Domain Location |
Frequency Domain Location |
Note |
|
PRACH |
Allowed for the parameters |
For format 0-3, the frequency location allowed is by prach-FrequencyOffset and |
Mapping rule is specified in TS 36.211 [8] Section 5.7.1 |
|
DMRS |
For PUCCH: Symbols 2 to 4 of each slot (PUCCH format: 1, 1a, 1b) Symbol 1 and 5 of each slot (PUCCH format: 2, 2a, 2b) For PUSCH: Symbol 3 of each slot |
Uplink system bandwidth dependent. |
Mapping rule of DMRS for PUCCH is specified in TS 36.211 [8] 5.5.2.2.2 Mapping rule of DMRS for PUSCH is specified in TS 36.211 [8] 5.5.2.1.2 |
|
PUCCH |
Slot 0 and 1 of each subframe |
Each 12 subcarriers of both ends of the bandwidth |
Mapping rule is specified in TS 36.211 [8] Section 5.4.3 |
|
PUSCH |
All remaining SC-FDMA symbols of each subframe not allocated to DMRS |
RBs allocated according to Reference Measurement channel in Annex A.2 |
Mapping rule is specified in TS 36.211 [8] Section 5.4.2 |
|
SRS |
Allowed for the cell-specific parameter srs-BandwidthConfig and the UE-specific parameter srs-Bandwidth provided by higher layers |
Allowed for the cell-specific parameter srsMaxUpPt and the UE-specific parameter transmissionComb or transmissionComb-ap provided by higher layers |
Mapping rule is specified in TS 36.211 [8] Section 5.5.3.2 |
in prach-Configuration Index provided by higher layers
in prach-Configuration Index provided by higher layers. Preamble format 4 is mapped only on UpPTS, where the frequency location allowed is only by NOTE: PUSCH, PUCCH, DMRS are not present in UpPTS for TDD.
H.1.1 General for NB1
This annex specifies the uplink physical channels that are needed for setting a connection and channels that are needed during a connection. Table H.1.1-1 describes the mapping of uplink physical channels and signals to physical resources for NB1 UE.
Table H.1.1-1: Mapping of uplink physical channels and signals to physical resources for NB1
|
Physical channel |
Time Domain Location |
Frequency Domain Location |
Note |
|
NPRACH |
Allowed for the parameter nprach-Configuration Index provided by higher layers |
Allowed for the parameter nprach-SubcarrierOffset provided by higher layers |
Mapping rule is specified in TS 36.211 [8] Section 10.1.6 |
|
NPUSCH |
All the SC-FDMA symbols of each subframe. |
RUs allocated according to Reference Measurement channel in Annex A.2 |
Mapping rule is specified in TS 36.211 [8] Section 10.1.3 |