6.2.2FA UE Maximum Output Power for category NB1 and NB2/Power Class 6

36.521-13GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Part 1: Conformance testingRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification

6.2.2FA.1 Test purpose

Same test purpose as in clause 6.2.2F.1.

6.2.2FA.2 Test applicability

This test case applies to all types of NB-IoT FDD Power Class 6 UE release 14 and forward of category NB1 and NB2.

This test case applies to all types of NB-IoT TDD Power Class 6 UE release 15 and forward of category NB1 and NB2.

6.2.2FA.3 Minimum conformance requirements

Category NB1 and NB2 UE Power Classes are specified in Table 6.2.2FA.3-1 and define the maximum output power for any transmission bandwidth within the category NB1 and NB2 channel bandwidth. For 3.75kHz sub-carrier spacing the maximum output power is defined as mean power of measurement which period is at least one slot (2ms) excluding the 2304Ts gap when UE is not transmitting. For 15kHz sub-carrier spacing the maximum output power is defined as mean power of measurement which period is at least one sub-frame (1ms).

Table 6.2.2FA.3-1: UE Power Class 6

EUTRA band

Class 3 (dBm)

Tolerance (dB)

Class 5 (dBm)

Tolerance (dB)

Class 6 (dBm)

Tolerance (dB)

1

NA

NA

NA

NA

14

±2.5

2

NA

NA

NA

NA

14

±2.5

3

NA

NA

NA

NA

14

±2.5

4

NA

NA

NA

NA

14

±2.5

5

NA

NA

NA

NA

14

±2.5

7

NA

NA

NA

NA

14

±2.5

8

NA

NA

NA

NA

14

±2.5

11

NA

NA

NA

NA

14

±2.5

12

NA

NA

NA

NA

14

±2.5

13

NA

NA

NA

NA

14

±2.5

14

NA

NA

NA

NA

14

±2.5

17

NA

NA

NA

NA

14

±2.5

18

NA

NA

NA

NA

14

±2.5

19

NA

NA

NA

NA

14

±2.5

20

NA

NA

NA

NA

14

±2.5

21

NA

NA

NA

NA

14

±2.5

25

NA

NA

NA

NA

14

±2.5

26

NA

NA

NA

NA

14

±2.5

28

NA

NA

NA

NA

14

±2.5

31

NA

NA

NA

NA

14

±2.5

41

NA

NA

NA

NA

14

±2.5

42

NA

NA

NA

NA

14

±2.5

43

NA

NA

NA

NA

14

±2.5

65

NA

NA

NA

NA

14

±2.5

66

NA

NA

NA

NA

14

±2.5

70

NA

NA

NA

NA

14

±2.5

71

NA

NA

NA

NA

14

±2.5

72

NA

NA

NA

NA

14

±2.5

73

NA

NA

NA

NA

14

±2.5

74

NA

NA

NA

NA

14

±2.5

85

NA

NA

NA

NA

14

±2.5

87

NA

NA

NA

NA

14

±2.5

88

NA

NA

NA

NA

14

±2.5

103

NA

NA

NA

NA

14

±2.5

The normative reference for this requirement is TS 36.101 clause 6.2.2F.

6.2.2FA.4 Test description

Same test description as in clause 6.2.2F.4.

6.2.2FA.5 Test requirements

Same test requirements as in clause 6.2.2F.5 with the following exceptions:

– Instead of Table 6.2.2F.5-1 🡪 use Table 6.2.2FA.5-1.

Table 6.2.2FA.5-1: UE Power Class test requirement for Power Class 6

EUTRA band

Class 6 (dBm)

Tolerance (dB)

1

14

±3.2

2

14

±3.2

3

14

±3.2

4

14

±3.2

5

14

±3.2

7

14

±3.2

8

14

±3.2

11

14

±3.2

12

14

±3.2

13

14

±3.2

14

14

±3.2

17

14

±3.2

18

14

±3.2

19

14

±3.2

20

14

±3.2

21

14

±3.2

25

14

±3.2

26

14

±3.2

28

14

±3.2

31

14

±3.2

41

14

±3.2

42

14

±3.5

43

14

±3.5

65

14

±3.2

66

14

±3.2

70

14

±3.2

71

14

±3.2

72

14

±3.2

73

14

±3.2

74

14

±3.2

85

14

±3.2

87

14

±3.2

88

14

±3.2

103

14

±3.2