A.6 Sidelink reference measurement channels
36.521-13GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Part 1: Conformance testingRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
A.6.1 General
The algorithm for determining the payload size A is as follows; given a desired coding rate R and radio block allocation NRB
1. Calculate the number of channel bits Nch that can be transmitted during the first transmission of a given sub-frame.
2. Find A such that the resulting coding rate is as close to R as possible, that is,
,
subject to
a) A is a valid TB size according to section 7.1.7 of TS 36.213 [10] assuming an allocation of NRB resource blocks.
b) C is the number of Code Blocks calculated according to section 5.1.2 of TS 36.212 [9].
3. If there is more than one A that minimizes the equation above, then the larger value is chosen per default and the chosen code rate should not exceed 0.93.
A.6.2 Reference measurement channel for receiver characteristics
For ProSe Direct Discovery, Table A.6.2-1 is applicable for measurements on the Receiver Characteristics (clause 7) including the requirements of subclause 7.4D (Maximum input level).
For ProSe Direct Communication, Table A.6.2-2 is applicable for measurements on the Receiver Characteristics (clause 7) with the exception of subclause 7.4D (Maximum input level). Tables A.6.2-3, A.6.2-4, are applicable for subclause 7.4D (Maximum input level).
Table A.6.2-1: Fixed Reference measurement channel for ProSe Direct Discovery receiver requirements and maximum input level
|
Parameter |
Unit |
Value |
|||||
|
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
|
Allocated resource blocks |
2 |
2 |
2 |
2 |
|||
|
Subcarriers per resource block |
12 |
12 |
12 |
12 |
|||
|
Allocated subframes per Discovery period |
1 |
1 |
1 |
1 |
|||
|
DFT-OFDM Symbols per subframe (see note) |
11 |
11 |
11 |
11 |
|||
|
Modulation |
QPSK |
QPSK |
QPSK |
QPSK |
|||
|
Transport Block Size |
232 |
232 |
232 |
232 |
|||
|
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
||
|
Maximum number of HARQ transmissions |
1 |
1 |
1 |
1 |
|||
|
Binary Channel Bits (see note) |
Bits |
528 |
528 |
528 |
528 |
||
|
Max. Throughput averaged over 1 Discovery period of 320ms |
kbps |
0.725 |
0.725 |
0.725 |
0.725 |
||
|
UE Category |
≥ 1 |
≥ 1 |
≥ 1 |
≥ 1 |
|||
|
Note1: PSDCH transmissions are rate-matched for 12 DFT-OFDM symbols per subframe, and the last symbol shall be punctured as per TS 36.211. NOTE2: Throughput is 232 bits per Discovery period. The discovery period is configured as 320ms in the test. |
|||||||
Table A.6.2-2: Fixed Reference measurement channel for ProSe Direct Communication receiver requirements
|
Parameter |
Unit |
Value |
|||||
|
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
|
Allocated resource blocks |
25 |
50 |
|||||
|
Subcarriers per resource block |
12 |
12 |
|||||
|
Packets per SA period |
1 |
1 |
|||||
|
Modulation |
QPSK |
QPSK |
|||||
|
Transport Block Size |
2216 |
4392 |
|||||
|
Transport block CRC |
Bits |
24 |
24 |
||||
|
Maximum number of HARQ transmissions |
4 |
4 |
|||||
|
Binary Channel Bits |
Bits |
7200 |
14400 |
||||
|
Max. Throughput averaged over 1 SA period of 40ms |
kbps |
55.4 |
109.8 |
||||
|
UE Category |
≥ 1 |
≥ 1 |
|||||
|
Note 1: For PSSCH transmission, the last symbol shall be punctured as per TS 36.211. NOTE 2: Throughput (in kbps) will depend on SA period configuration |
|||||||
Table A.6.2-3: Fixed Reference measurement channel for ProSe Direct Communication
for maximum input power for UE categories 2-8
|
Parameter |
Unit |
Value |
|||||
|
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
|
Allocated resource blocks |
25 |
50 |
|||||
|
Subcarriers per resource block |
12 |
12 |
|||||
|
Packets per SA period |
1 |
1 |
|||||
|
Modulation |
16QAM |
16QAM |
|||||
|
Transport Block Size |
9912 |
18336 |
|||||
|
Transport block CRC |
Bits |
24 |
24 |
||||
|
Maximum number of HARQ transmissions |
4 |
4 |
|||||
|
Binary Channel Bits |
Bits |
14400 |
28800 |
||||
|
Max. Throughput averaged over 1 SA period of 40ms |
kbps |
247.8 |
458.4 |
||||
|
Note 1: For PSSCH transmission, the last symbol shall be punctured as per TS 36.211. Note 2: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). NOTE 3: Throughput (in kbps) will depend on SA period configuration |
|||||||
Table A.6.2-4: Fixed Reference measurement channel for ProSe Direct Communication
for maximum input power for UE category 1
|
Parameter |
Unit |
Value |
|||||
|
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
|
Allocated resource blocks |
25 |
24 |
|||||
|
Subcarriers per resource block |
12 |
12 |
|||||
|
Packets per SA period |
1 |
1 |
|||||
|
Modulation |
16QAM |
16QAM |
|||||
|
Transport Block Size |
9912 |
10296 |
|||||
|
Transport block CRC |
Bits |
24 |
24 |
||||
|
Maximum number of HARQ transmissions |
4 |
4 |
|||||
|
Binary Channel Bits |
Bits |
14400 |
13824 |
||||
|
Max. Throughput averaged over 1 SA period of 40ms |
kbps |
247.8 |
257.4 |
||||
|
Note 1: For PSSCH transmission, the last symbol shall be punctured as per TS 36.211. Note 2: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). NOTE 3: Throughput (in kbps) will depend on SA period configuration |
|||||||
A.6.3 Reference measurement channels for PSDCH performance requirements
Table A.6.3-1: Fixed Reference measurement channel for PSDCH performance requirement
|
Parameter |
Unit |
Value |
|||||
|
Reference channel |
D.1 FDD / D.1 TDD |
||||||
|
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
|
Allocated resource blocks |
2 |
2 |
2 |
2 |
|||
|
Subcarriers per resource block |
12 |
12 |
12 |
12 |
|||
|
DFT-OFDM Symbols per subframe (see note) |
11 |
11 |
11 |
11 |
|||
|
Modulation |
QPSK |
QPSK |
QPSK |
QPSK |
|||
|
Transport Block Size |
232 |
232 |
232 |
232 |
|||
|
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
||
|
Binary Channel Bits (see note) |
Bits |
528 |
528 |
528 |
528 |
||
|
Max. Throughput averaged over 1 Discovery period of 320ms |
kbps |
0.725 |
0.725 |
0.725 |
0.725 |
||
|
UE Category |
≥ 1 |
≥ 1 |
≥ 1 |
≥ 1 |
|||
|
NOTE1: PSDCH transmissions are rate-matched for 12 DFT-OFDM symbols per subframe, and the last symbol shall be punctured as per TS 36.211. |
|||||||
A.6.4 Reference measurement channels for PSCCH performance requirements
Table A.6.4-1: Fixed reference measurement channel for PSCCH performance requirement
|
Parameter |
Unit |
Value |
||||||
|
Reference channel |
CC.1 FDD |
CC.2 FDD |
CC.3 FDD |
CC.4 FDD |
CC.5 FDD |
CC.6 FDD |
||
|
Channel bandwidth |
MHz |
5 |
10 |
5 |
10 |
5 |
10 |
|
|
Allocated resource blocks |
1 |
1 |
1 |
1 |
1 |
1 |
||
|
Subcarriers per resource block |
12 |
12 |
12 |
12 |
12 |
12 |
||
|
DFT-OFDM Symbols per subframe |
11 |
11 |
11 |
11 |
11 |
11 |
||
|
Modulation |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
||
|
Transport Block Size |
Bits |
41 |
43 |
41 |
43 |
41 |
43 |
|
|
Information bits |
Frequency hopping flag |
0 |
0 |
1 |
1 |
1 |
1 |
|
|
RB assignment |
Set as per PSSCH RB allocation specific in the test |
|||||||
|
Hopping bits |
N/A |
N/A |
1 Type 2 Hopping |
(1,1) Type 2 Hopping |
0 Type 1 Hopping |
(1,0) Type 1 Hopping |
||
|
Time resource pattern (ITRP) |
8 (unless specified otherwise in the test) (NOTE 3) |
|||||||
|
Modulation and coding scheme |
Set as the PSSCH MCS specified in the test |
|||||||
|
Timing advance indication |
0 (unless specified otherwise in the test) |
|||||||
|
Group destination ID |
As set by higher layers |
|||||||
|
Transport block CRC |
Bits |
16 |
16 |
16 |
16 |
16 |
16 |
|
|
Maximum number of HARQ transmissions |
2 |
2 |
2 |
2 |
2 |
2 |
||
|
Binary Channel Bits (see NOTE 1,2) |
Bits |
264 |
264 |
264 |
264 |
264 |
264 |
|
|
Max. Throughput averaged over one sc-period (bits/sc-period) |
41 |
43 |
41 |
43 |
41 |
43 |
||
|
NOTE 1: PSCCH transmissions are rate-matched for 12 DFT-OFDM symbols per subframe, and the last symbol shall be punctured as per TS 36.211. NOTE 2: Binary channel bits per HARQ transmission. NOTE 3: For NTRP = 8 (FDD) and trpt-Subset = 010, ITRP = 8 corresponds to a time repetition pattern of (1,1,0,0,0,0,0,0) as per TS 36.213. |
||||||||
A.6.5 Reference measurement channels for PSSCH performance requirements
Table A.6.5-1: Fixed reference measurement channel for PSSCH performance requirement
|
Parameter |
Unit |
Value |
||||
|
Reference channel |
CD.1 FDD |
CD.2 FDD |
CD.3 FDD |
CD.4 FDD |
CD.5 FDD |
|
|
Channel bandwidth |
MHz |
5 / 10 |
5 / 10 |
5 |
10 |
5 / 10 |
|
Allocated resource blocks |
10 |
10 |
25 |
50 |
2 |
|
|
Subcarriers per resource block |
12 |
12 |
12 |
12 |
12 |
|
|
DFT-OFDM Symbols per subframe |
11 |
11 |
11 |
11 |
11 |
|
|
Modulation |
QPSK |
16QAM |
16QAM |
16QAM |
QPSK |
|
|
Transport Block Size |
872 |
2536 |
6546 |
12960 |
328 |
|
|
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
|
Maximum number of HARQ transmissions |
4 |
4 |
4 |
4 |
4 |
|
|
Binary Channel Bits (see NOTE 1,2) |
Bits |
2640 |
5280 |
13200 |
26400 |
528 |
|
Max. Throughput averaged over one sc-period (bits/sc-period) |
872 |
2536 |
6546 |
12960 |
328 |
|
|
NOTE 1: PSSCH transmissions are rate-matched for 12 DFT-OFDM symbols per subframe, and the last symbol shall be punctured as per TS 36.211. NOTE 2: Binary channel bits per HARQ transmission. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). |
||||||
Table A.6.5-2: Fixed reference measurement channel for PSSCH for maximum Sidelink processes test
|
Parameter |
Unit |
Value |
|
|
Reference channel |
CD.6 FDD |
CD.7 FDD |
|
|
Channel bandwidth |
MHz |
5 |
10 |
|
Allocated resource blocks |
25 |
50 |
|
|
Subcarriers per resource block |
12 |
12 |
|
|
DFT-OFDM Symbols per subframe |
11 |
11 |
|
|
Modulation |
16QAM |
16QAM |
|
|
Transport Block Size |
15840 |
25456 |
|
|
Transport block CRC |
Bits |
24 |
24 |
|
Maximum number of HARQ transmissions |
4 |
4 |
|
|
Binary Channel Bits (see NOTE 1,2) |
Bits |
13200 |
26400 |
|
Max. Throughput averaged over one sc-period (bits/sc-period) |
15840 |
25456 |
|
|
NOTE 1: PSSCH transmissions are rate-matched for 12 DFT-OFDM symbols per subframe, and the last symbol shall be punctured as per TS 36.211. NOTE 2: Binary channel bits per HARQ transmission. NOTE 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). |
|||
A.6.6 Reference measurement channels for PSBCH performance requirements
Table A.6.6-1: Fixed reference measurement channel for PSBCH performance requirement
|
Parameter |
Unit |
Value |
|
Reference channel |
CP.1 FDD |
|
|
Channel bandwidth |
MHz |
5 / 10 |
|
Allocated resource blocks |
6 |
|
|
Subcarriers per resource block |
12 |
|
|
DFT-OFDM Symbols per subframe |
7 |
|
|
Modulation |
QPSK |
|
|
Transport Block Size |
40 |
|
|
Transport block CRC |
Bits |
16 |
|
Maximum number of HARQ transmissions |
1 |
|
|
Binary Channel Bits (see NOTE 1,2) |
Bits |
1008 |
|
Max. Throughput averaged over 40ms |
kbps |
1 |
|
NOTE 1: PSBCH transmissions are rate-matched for 8 DFT-OFDM symbols per subframe, and the last symbol shall be punctured as per TS 36.211. |
||