A.3.8 Reference measurement channels for MBMS performance requirements
36.521-13GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Part 1: Conformance testingRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
A.3.8.1 FDD
Table A.3.8.1-1: Fixed Reference Channel QPSK R=1/3
Parameter |
PMCH |
||||||
Unit |
Value |
||||||
Reference channel |
R.40 FDD |
R.37 FDD |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
50 |
|||||
Allocated subframes per Radio Frame (Note 1) |
6 |
6 |
|||||
Modulation |
QPSK |
QPSK |
|||||
Target Coding Rate |
1/3 |
1/3 |
|||||
Information Bit Payload (Note 2) |
|||||||
For Sub-Frames 1,2,3,6,7,8 |
Bits |
408 |
3624 |
||||
For Sub-Frames 0,4,5,9 |
Bits |
n/a |
n/a |
||||
Number of Code Blocks per Subframe (Note 3) |
1 |
1 |
|||||
Binary Channel Bits Per Subframe |
|||||||
For Sub-Frames 1,2,3,6,7,8 |
Bits |
1224 |
10200 |
||||
For Sub-Frames 0,4,5,9 |
Bits |
n/a |
n/a |
||||
MBMS UE Category |
≥ 1 |
≥ 1 |
|||||
Note 1: For FDD mode, up to 6 subframes (#1/2/3/6/7/8) are available for MBMS, in line with TS 36.331. Note 2: 2 OFDM symbols are reserved for PDCCH; and reference signal allocated as per TS 36.211. Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). |
Table A.3.8.1-2: Fixed Reference Channel 16QAM R=1/2
Parameter |
PMCH |
|||||||
Unit |
Value |
|||||||
Reference channel |
R.38 FDD |
|||||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
|
Allocated resource blocks |
50 |
|||||||
Allocated subframes per Radio Frame (Note 1) |
6 |
|||||||
Modulation |
16QAM |
|||||||
Target Coding Rate |
1/2 |
|||||||
Information Bit Payload (Note 2) |
||||||||
For Sub-Frames 1,2,3,6,7,8 |
Bits |
9912 |
||||||
For Sub-Frames 0,4,5,9 |
Bits |
n/a |
||||||
Number of Code Blocks per Subframe (Note 3) |
2 |
|||||||
Binary Channel Bits Per Subframe |
||||||||
For Sub-Frames 1,2,3,6,7,8 |
Bits |
20400 |
||||||
For Sub-Frames 0,4,5,9 |
Bits |
n/a |
||||||
MBMS UE Category |
≥ 1 |
|||||||
Note 1: For FDD mode, up to 6 subframes (#1/2/3/6/7/8) are available for MBMS, in line with TS 36.331. Note 2: 2 OFDM symbols are reserved for PDCCH; and reference signal allocated as per TS 36.211. Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). |
Table A.3.8.1-3: Fixed Reference Channel 64QAM R=2/3
Parameter |
PMCH |
|||||||
Unit |
Value |
|||||||
Reference channel |
R.39-1 FDD |
R.39 FDD |
||||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
|
Allocated resource blocks |
25 |
50 |
||||||
Allocated subframes per Radio Frame(Note1) |
6 |
6 |
||||||
Modulation |
64QAM |
64QAM |
||||||
Target Coding Rate |
2/3 |
2/3 |
||||||
Information Bit Payload (Note 2) |
||||||||
For Sub-Frames 1,2,3,6,7,8 |
Bits |
9912 |
19848 |
|||||
For Sub-Frames 0,4,5,9 |
Bits |
n/a |
n/a |
|||||
Number of Code Blocks per Sub-Frame (Note 3) |
2 |
4 |
||||||
Binary Channel Bits Per Subframe |
||||||||
For Sub-Frames 1,2,3,6,7,8 |
Bits |
15300 |
30600 |
|||||
For Sub-Frames 0,4,5,9 |
Bits |
n/a |
n/a |
|||||
MBMS UE Category |
≥ 1 |
≥ 2 |
||||||
Note 1: For FDD mode, up to 6 subframes (#1/2/3/6/7/8) are available for MBMS, in line with TS 36.331. Note 2: 2 OFDM symbols are reserved for PDCCH; and reference signal allocated as per TS 36.211. Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). |
A.3.8.2 TDD
Table A.3.8.2-1: Fixed Reference Channel QPSK R=1/3
Parameter |
PMCH |
||||||
Unit |
Value |
||||||
Reference channel |
R.40 TDD |
R.37 TDD |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
50 |
|||||
Uplink-Downlink Configuration(Note 1) |
5 |
5 |
|||||
Allocated subframes per Radio Frame |
5 |
5 |
|||||
Modulation |
QPSK |
QPSK |
|||||
Target Coding Rate |
1/3 |
1/3 |
|||||
Information Bit Payload (Note 2) |
|||||||
For Sub-Frames 3,4,7,8,9 |
Bits |
408 |
3624 |
||||
For Sub-Frames 0,1,2,5,6 |
Bits |
n/a |
n/a |
||||
Number of Code Blocks per Subframe (Note 3) |
1 |
1 |
|||||
Binary Channel Bits Per Subframe |
|||||||
For Sub-Frames 3,4,7,8,9 |
Bits |
1224 |
10200 |
||||
For Sub-Frames 0,1,2,5,6 |
Bits |
n/a |
n/a |
||||
MBMS UE Category |
≥ 1 |
≥ 1 |
|||||
Note 1: For TDD mode, in line with TS 36.331, Uplink-Downlink Configuration 5 is proposed, up to 5 subframes (#3/4/7/8/9) are available for MBMS. Note 2: 2 OFDM symbols are reserved for PDCCH; reference signal allocated as per TS 36.211. Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). |
Table A.3.8.2-2: Fixed Reference Channel 16QAM R=1/2
Parameter |
PMCH |
|||||||
Unit |
Value |
|||||||
Reference channel |
R.38 TDD |
|||||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
|
Allocated resource blocks |
50 |
|||||||
Uplink-Downlink Configuration(Note 1) |
5 |
|||||||
Allocated subframes per Radio Frame |
5 |
|||||||
Modulation |
16QAM |
|||||||
Target Coding Rate |
1/2 |
|||||||
Information Bit Payload (Note 2) |
||||||||
For Sub-Frames 3,4,7,8,9 |
Bits |
9912 |
||||||
For Sub-Frames 0,1,2,5,6 |
Bits |
n/a |
||||||
Number of Code Blocks per Subframe (Note 3) |
2 |
|||||||
Binary Channel Bits Per Subframe |
||||||||
For Sub-Frames 3,4,7,8,9 |
Bits |
20400 |
||||||
For Sub-Frames 0,1,2,5,6 |
Bits |
n/a |
||||||
MBMS UE Category |
≥ 1 |
|||||||
Note 1: For TDD mode, in line with TS 36.331, Uplink-Downlink Configuration 5 is proposed, up to 5 subframes (#3/4/7/8/9) are available for MBMS. Note 2: 2 OFDM symbols are reserved for PDCCH; reference signal allocated as per TS 36.211. Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). |
Table A.3.8.2-3: Fixed Reference Channel 64QAM R=2/3
Parameter |
PMCH |
||||||
Unit |
Value |
||||||
Reference channel |
R.39-1 TDD |
R.39 TDD |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
25 |
50 |
|||||
Uplink-Downlink Configuration(Note 1) |
5 |
5 |
|||||
Allocated subframes per Radio Frame |
5 |
5 |
|||||
Modulation |
64QAM |
64QAM |
|||||
Target Coding Rate |
2/3 |
2/3 |
|||||
Information Bit Payload (Note 2) |
|||||||
For Sub-Frames 3,4,7,8,9 |
Bits |
9912 |
19848 |
||||
For Sub-Frames 0,1,2,5,6 |
Bits |
n/a |
n/a |
||||
Number of Code Blocks per Sub-Frame (Note 3) |
2 |
4 |
|||||
Binary Channel Bits Per Subframe |
|||||||
For Sub-Frames 3,4,7,8,9 |
Bits |
15300 |
30600 |
||||
For Sub-Frames 0,1,2,5,6 |
Bits |
n/a |
n/a |
||||
MBMS UE Category |
≥ 1 |
≥ 2 |
|||||
Note 1: For TDD mode, in line with TS 36.331, Uplink-Downlink Configuration 5 is proposed, up to 5 subframes (#3/4/7/8/9) are available for MBMS. Note 2: 2 OFDM symbols are reserved for PDCCH; reference signal allocated as per TS 36.211. Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). |