A.3.15 Reference Measurement Channels for LAA SCell with frame structure Type-3
36.521-13GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Part 1: Conformance testingRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
A.3.15.1 Multi-antenna transmission (Common Reference Symbols)
A.3.15.1.1 Four antenna ports
Table A.3.15.1.1-1: Reference Channel with four CRS ports
Parameter |
Unit |
Value |
Reference channel |
R.1 FS3 |
|
Channel bandwidth |
MHz |
20 |
Allocated resource blocks (Note 4) |
100 |
|
Allocated subframes per Radio Frame |
10 |
|
Modulation |
64QAM |
|
Target Coding Rate |
0.6 |
|
Information Bit Payload (Note 4) |
||
For Sub-Frames 1,4,6,9 |
Bits |
{46888,15840,24496,37888,19848} |
For Sub-Frames 2, 7 |
{46888,15840,24496,37888,19848} |
|
For Sub-Frames 3, 8 |
{46888,15840,24496,37888,19848} |
|
For Sub-Frame 5 |
Bits |
{46888,15840,24496,37888,19848} |
For Sub-Frame 0 |
Bits |
{46888,15840,24496,37888,19848} |
Number of Code Blocks |
||
(Notes 3 and 4) |
||
For Sub-Frames 1,4,6,,9 |
{8,3,4,7,4} |
|
For Sub-Frames 2,7 |
{8,3,4,7,4} |
|
For Sub-Frames 3, 8 |
{8,3,4,7,4} |
|
For Sub-Frame 5 |
{8,3,4,7,4} |
|
For Sub-Frame 0 |
{8,3,4,7,4} |
|
Binary Channel Bits (Note 4) |
||
For Sub-Frames 1,4,6,9 |
Bits |
{76800,26400,43200,62400,33600} |
For Sub-Frames 2, 7 |
{76800,26400,43200,62400,33600} |
|
For Sub-Frames 3, 8 |
{76800,26400,43200,62400,33600} |
|
For Sub-Frame 5 |
Bits |
{75936,26400,43200,61536,33600} |
For Sub-Frame 0 (Note 5) |
Bits |
{75936,26400,43200,61536,33600} |
UE Category |
≥ 5 |
|
Note 1: 2 symbols allocated to PDCCH for 20 MHz, 15 MHz and 10 MHz channel BW; 3 symbols allocated to PDCCH for 5 MHz and 3 MHz; 4 symbols allocated to PDCCH for 1.4 MHz. Note 2: Reference signal, synchronization signals and PBCH allocated as per TS 36.211 [8]. Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). Note 4: Given per component carrier per codeword. Note 5: For {a1,a2,a3,a4,a5}, a1, a2, a3, a4 and a5 stand for the setup when the number of OFDM symbols is 14, 6, 9, 12, 7, respectively. |
A.3.15.2 Reference Measurement Channel for UE-Specific Reference Symbols
A.3.15.2.1 Two antenna ports (CSI-RS)
The reference measurement channels in Table A.3.15.2.1-1 apply for verifying demodulation performance for UE-specific reference symbols with two cell-specific antenna ports and two CSI-RS antenna ports for LAA SCell.
Table A.3.15.2.1-1: Reference Channel with two CRS ports
Parameter |
Unit |
Value |
Reference channel |
R.2 FS3 |
|
Channel bandwidth |
MHz |
20 |
Allocated resource blocks (Note 4) |
100 |
|
Allocated subframes per Radio Frame |
10 |
|
Modulation |
16QAM |
|
Target Coding Rate |
1/2 |
|
Information Bit Payload (Note 4) |
||
For Sub-Frames 1,4,6,9 |
Bits |
{22920,7480,12960,19080,10296} |
For Sub-Frames 2, 7 |
{22920,7480,12960,19080,10296} |
|
For Sub-Frames 3, 8 |
{22920,7480,12960,19080,10296} |
|
For Sub-Frame 5 |
Bits |
{19848, 6712, 11448, 16992, 9144} |
For Sub-Frame 0 |
Bits |
{19848, 6712, 11448, 16992, 9144} |
Number of Code Blocks |
||
(Notes 3 and 4) |
||
For Sub-Frames 1,4,6,9 |
{4,2,3,4,2} |
|
For Sub-Frames 2,7 |
{4,2,3,4,2} |
|
For Sub-Frames 3, 8 |
{4, 2, 3, 4, 2} |
|
For Sub-Frame 5 |
{4, 2, 2, 3, 2} |
|
For Sub-Frame 0 |
{4, 2, 2, 3, 2} |
|
Binary Channel Bits (Note 4) |
||
For Sub-Frames 1,4,6,9 |
Bits |
{48000,15200,25600,38400,20000} |
For Sub-Frames 2, 7 |
{47200,15200,25600,38400,20000} |
|
For Sub-Frames 3, 8 |
{46400,15200,25600,38400,20000} |
|
For Sub-Frame 5 |
Bits |
{42240,13376,22528,33792,17600} |
For Sub-Frame 0 (Note 5) (Note 6) |
Bits |
{42240,13376,22528,33792,17600} |
UE Category |
≥ 5 |
|
Note 1: 2 symbols allocated to PDCCH for 20 MHz, 15 MHz and 10 MHz channel BW; 3 symbols allocated to PDCCH for 5 MHz and 3 MHz; 4 symbols allocated to PDCCH for 1.4 MHz. Note 2: Reference signal, synchronization signals and PBCH allocated as per TS 36.211 [8]. Note 3: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). Note 4: Given per component carrier per codeword. Note 5: For TM9, 100 resource blocks are allocated in sub-frames 1, 2, 3, 4, 6, 7, 8, 9 and 88 resource blocks (RB0-RB43,RB56-RB99) are allocated in subframe 0 and subframe 5 Note 6: For {a1,a2,a3,a4,a5}, a1, a2, a3, a4 and a5 stand for the setup when the number of OFDM symbols is 14, 6, 9, 12, 7, respectively |
Table A.3.15-2: Void
A.3.16 Reference measurement channels for Slot-PDSCH and Subslot-PDSCH performance requirements
A.3.16.1 FDD
Table A.3.16.1-1: Fixed Reference Channel Slot-PDSCH (Cell-Specific Reference Signals)
Parameter |
Unit |
|
Reference channel |
R.sTTI.1 FDD |
|
Channel bandwidth |
MHz |
10 |
Allocated resource blocks |
50 |
|
Allocated subframes per Radio Frame |
8 |
|
Modulation |
16QAM |
|
Target Coding Rate |
1/2 |
|
Information Bit Payload |
||
For Sub-Frames 1,2,3,4,6,7,8,9 |
||
Slot index 0 |
Bits |
11448 |
Slot index 1 |
Bits |
14112 |
For Sub-Frames 0,5 |
N/A |
|
Number of Code Blocks |
||
For Sub-Frames 1,2,3,4,6,7,8,9 |
||
Slot index 0 |
2 |
|
Slot index 1 |
4 |
|
For Sub-Frame 0,5 |
N/A |
|
Binary Channel Bits |
||
For Sub-Frames 1,2,3,4,6,7,8,9 |
||
Slot index 0 |
Bits |
22400 |
Slot index 1 |
Bits |
28288 |
For Sub-Frame 0,5 |
N/A |
|
Max. Throughput averaged over 1 frame |
Mbps |
20.448 |
UE Category |
≥2 |
|
Note 1: For an information bit payload first transmitted at slot 0, any retransmission happens only on slot 0. For an information bit payload first transmitted at slot 1, any retransmission happens on only slot 1. |
Table A.3.16.1-2: Fixed Reference Channel Subslot-PDSCH (Cell-Specific Reference Signals)
Parameter |
Unit |
|
Reference channel |
R.sTTI.2 FDD |
|
Channel bandwidth |
MHz |
10 |
Allocated resource blocks |
50 |
|
Allocated subframes per Radio Frame |
8 |
|
Modulation |
16QAM |
|
Target Coding Rate |
0.45 |
|
Information Bit Payload |
||
For Sub-Frames 1,2,3,4,6,7,8,9 |
||
Subslot index 1 |
Bits |
5160 |
Subslot index 2 |
Bits |
3880 |
Subslot index 3 |
Bits |
2664 |
Subslot index 4 |
Bits |
3880 |
Subslot index 5 |
Bits |
5160 |
For Sub-Frames 0,5 |
N/A |
|
Number of Code Blocks |
||
For Sub-Frames 1,2,3,4,6,7,8,9 |
||
Subslot index 1 |
1 |
|
Subslot index 2 |
1 |
|
Subslot index 3 |
1 |
|
Subslot index 4 |
1 |
|
Subslot index 5 |
1 |
|
For Sub-Frame 0,5 |
N/A |
|
Binary Channel Bits |
||
For Sub-Frames 1,2,3,4,6,7,8,9 |
||
Subslot index 1 |
Bits |
12032 |
Subslot index 2 |
Bits |
8832 |
Subslot index 3 |
Bits |
5888 |
Subslot index 4 |
Bits |
8832 |
Subslot index 5 |
Bits |
12288 |
For Sub-Frame 0,5 |
N/A |
|
Max. Throughput averaged over 1 frame |
Mbps |
16.5952 |
UE Category |
≥2 |
|
Note 1: For an information bit payload first transmitted at subslot 1, any retransmission happens only on subslots 1 and 5. For an information bit payload first transmitted at subslot 2, any retransmission happens only on subslots 2 and 4. For an information bit payload first transmitted at subslot 3, any retransmission happens only on subslot 3. For an information bit payload first transmitted at subslot 4, any retransmission happens only on subslots 2 and 4. For an information bit payload first transmitted at subslot 5, any retransmission happens only on subslots 1 and 5. |
Table A.3.16.1-3: Fixed Reference Channel Slot-PDSCH (User-Specific Reference Signals)
Parameter |
Unit |
|
Reference channel |
R.sTTI.3 FDD |
|
Channel bandwidth |
MHz |
10 |
Allocated resource blocks |
50 |
|
Allocated subframes per Radio Frame |
8 |
|
Modulation |
QPSK |
|
Target Coding Rate |
1/3 |
|
Information Bit Payload |
||
For Sub-Frames 1,3,4,6,8,9 |
||
Slot index 0 |
Bits |
3624 |
Slot index 1 |
Bits |
4392 |
For Sub-Frames 2,7 |
||
Slot index 0 |
Bits |
2856 |
Slot index 1 |
Bits |
4392 |
For Sub-Frames 0,5 |
N/A |
|
Number of Code Blocks |
||
For Sub-Frames 1,3,4,6,8,9 |
||
Slot index 0 |
1 |
|
Slot index 1 |
1 |
|
For Sub-Frames 2,7 |
||
Slot index 0 |
1 |
|
Slot index 1 |
1 |
|
For Sub-Frame 0,5 |
N/A |
|
Binary Channel Bits |
||
For Sub-Frames 1,3,4,6,8,9 |
||
Slot index 0 |
Bits |
10000 |
Slot index 1 |
Bits |
13360 |
For Sub-Frames 2,7 |
||
Slot index 0 |
Bits |
9600 |
Slot index 1 |
Bits |
13360 |
For Sub-Frame 0,5 |
N/A |
|
Max. Throughput averaged over 1 frame |
Mbps |
6.2592 |
UE Category |
≥2 |
|
Note 1: For an information bit payload first transmitted at slot 0, any retransmission happens only on slot 0. For an information bit payload first transmitted at slot 1, any retransmission happens only on slot 1. |
Table A.3.16.1-4: Fixed Reference Channel Subslot-PDSCH (User-Specific Reference Signals)
Parameter |
Unit |
|
Reference channel |
R.sTTI.4 FDD |
|
Channel bandwidth |
MHz |
10 |
Allocated resource blocks |
50 |
|
Allocated subframes per Radio Frame |
8 |
|
Modulation |
QPSK |
|
Target Coding Rate |
1/3 |
|
Information Bit Payload |
||
For Sub-Frames 1,3,4,6,8,9 |
||
Subslot index 1 |
Bits |
1736 |
Subslot index 2 |
Bits |
1192 |
Subslot index 3 |
Bits |
776 |
Subslot index 4 |
Bits |
1192 |
Subslot index 5 |
Bits |
1736 |
For Sub-Frames 2,7 |
||
Subslot index 1 |
Bits |
1736 |
Subslot index 2 |
Bits |
1192 |
Subslot index 3 |
Bits |
776 |
Subslot index 4 |
Bits |
1192 |
Subslot index 5 |
Bits |
1736 |
For Sub-Frames 0,5 |
N/A |
|
Number of Code Blocks |
||
For Sub-Frames 1,3,4,6,8,9 |
||
Subslot index 1 |
1 |
|
Subslot index 2 |
1 |
|
Subslot index 3 |
1 |
|
Subslot index 4 |
1 |
|
Subslot index 5 |
1 |
|
For Sub-Frames 2,7 |
||
Subslot index 1 |
1 |
|
Subslot index 2 |
1 |
|
Subslot index 3 |
1 |
|
Subslot index 4 |
1 |
|
Subslot index 5 |
1 |
|
For Sub-Frame 0,5 |
N/A |
|
Binary Channel Bits |
||
For Sub-Frames 1,3,4,6,8,9 |
||
Subslot index 1 |
Bits |
4960 |
Subslot index 2 |
Bits |
4032 |
Subslot index 3 |
Bits |
2688 |
Subslot index 4 |
Bits |
4032 |
Subslot index 5 |
Bits |
5088 |
For Sub-Frames 2,7 |
||
Subslot index 1 |
Bits |
4960 |
Subslot index 2 |
Bits |
3696 |
Subslot index 3 |
Bits |
2688 |
Subslot index 4 |
Bits |
4032 |
Subslot index 5 |
Bits |
5088 |
For Sub-Frame 0,5 |
N/A |
|
Max. Throughput averaged over 1 frame |
Mbps |
5.3056 |
UE Category |
≥2 |
|
Note 1: For an information bit payload first transmitted at subslot 1, any retransmission happens only on subslots 1 and 5. For an information bit payload first transmitted at subslot 2, any retransmission happens only on subslots 2 and 4. For an information bit payload first transmitted at subslot 3, any retransmission happens only on subslot 3. For an information bit payload first transmitted at subslot 4, any retransmission happens only on subslots 2 and 4. For an information bit payload first transmitted at subslot 5, any retransmission happens only on subslots 1 and 5. Note 2: In any retransmission, no information bit payloads are scheduled at subslot #n when information bit payloads are not scheduled at subslot #(n-1). |
A.3.16.2 TDD
Table A.3.16.2-1: Fixed Reference Channel Slot-PDSCH (Cell-Specific Reference Signals)
Parameter |
Unit |
|
Reference channel |
R.sTTI.1 TDD |
|
Channel bandwidth |
MHz |
10 |
Allocated resource blocks |
50 |
|
Uplink-Downlink Configuration |
1 |
|
Allocated subframes per Radio Frame (D) |
2 |
|
Modulation |
16QAM |
|
Target Coding Rate |
1/2 |
|
Information Bit Payload |
||
For Sub-Frames 4,9 |
||
Slot index 0 |
Bits |
11448 |
Slot index 1 |
Bits |
14112 |
For Sub-Frames 0,1,5,6 |
N/A |
|
Number of Code Blocks |
||
For Sub-Frames 4,9 |
||
Slot index 0 |
2 |
|
Slot index 1 |
4 |
|
For Sub-Frames 0,1,5,6 |
N/A |
|
Binary Channel Bits |
||
For Sub-Frames 4,9 |
||
Slot index 0 |
Bits |
22400 |
Slot index 1 |
Bits |
28288 |
For Sub-Frame 0,1,5,6 |
N/A |
|
Max. Throughput averaged over 1 frame |
Mbps |
5.112 |
UE Category |
≥2 |
|
Note 1: For an information bit payload first transmitted at slot 0, any retransmission happens only on slot 0. For an information bit payload first transmitted at slot 1, any retransmission happens only on slot 1. |
Table A.3.16.2-2: Fixed Reference Channel Slot-PDSCH (User-Specific Reference Signals)
Parameter |
Unit |
|
Reference channel |
R.sTTI.2 TDD |
|
Channel bandwidth |
MHz |
10 |
Allocated resource blocks |
50 |
|
Uplink-Downlink Configurtion |
1 |
|
Allocated subframes per Radio Frame (D) |
2 |
|
Modulation |
QPSK |
|
Target Coding Rate |
1/3 |
|
Information Bit Payload |
||
For Sub-Frames 4,9 |
||
Slot index 0 |
Bits |
2856 |
Slot index 1 |
Bits |
4392 |
For Sub-Frames 0,1,5,6 |
N/A |
|
Number of Code Blocks |
||
For Sub-Frames 4,9 |
||
Slot index 0 |
1 |
|
Slot index 1 |
1 |
|
For Sub-Frames 0,1,5,9 |
N/A |
|
Binary Channel Bits |
||
For Sub-Frames 4,9 |
||
Slot index 0 |
Bits |
9600 |
Slot index 1 |
Bits |
13360 |
For Sub-Frame 0,1,5,6 |
N/A |
|
Max. Throughput averaged over 1 frame |
Mbps |
1.4496 |
UE Category |
≥2 |
|
Note 1: For an information bit payload first transmitted at slot 0, any retransmission happens only on slot 0. For an information bit payload first transmitted at slot 1, any retransmission happens only on slot 1. |
A.3.17 Reference measurement channels for SPDCCH performance requirements
A.3.17.1 FDD
Table A.3.17.1-1: Reference Channel FDD
Parameter |
Unit |
||
Reference channel |
R.sTTI.10 FDD |
R.sTTI.11 FDD |
|
Number of transmitter antennas |
4 |
2 |
|
Channel bandwidth |
MHz |
10 |
10 |
Aggregation level |
SCCE |
2 |
8 |
DCI Format |
7-1C |
7-1F |
|
Cell ID |
0 |
0 |
|
Payload (without CRC) |
Bits |
32 |
28 |
A.3.17.2 TDD
Table A.3.17.2-1: Reference Channel TDD
Parameter |
Unit |
||
Reference channel |
R.sTTI.10 TDD |
R.sTTI.11 TDD |
|
Number of transmitter antennas |
4 |
2 |
|
Channel bandwidth |
MHz |
10 |
10 |
Aggregation level |
SCCE |
2 |
8 |
DCI Format |
7-1C |
7-1F |
|
Cell ID |
0 |
0 |
|
Payload (without CRC) |
Bits |
34 |
30 |