A.3.11 Reference Measurement Channels for MPDCCH performance requirements

36.521-13GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Part 1: Conformance testingRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification

A.3.11.1 FDD and half-duplex FDD

Table A.3.11.1-1: Reference Channel FDD and half-duplex FDD

Parameter

Unit

Value

Value

Reference channel

R.82 FDD

R.83 FDD

Number of transmitter antennas

2

2

Channel bandwidth

MHz

10

10

OFDM starting symbol (startSymbolLC)

symbols

2

2

Aggregation level

ECCE

16

24

DCI Format

6-1A

6-1B

Payload (without CRC)

Bits

29

18

PRB allocation

8-th ~11-th PRB

As specified in Test

Table A.3.11.1-2: Additional PDSCH Reference Channel FDD and half-duplex FDD for R.82 FDD

Parameter

Unit

Values

Channel bandwidth

MHz

10

Allocated resource blocks (Note 4)

4

Allocated DL subframes per 96 subframes (Note 3)

32

Modulation

QPSK

Target Coding Rate

1/2

Information Bit Payload

For Sub-Frames 0,1,2,3,4,5,6,7,8,9

Bits

472

Number of Code Blocks

For Sub-Frames 0,1,2,3,4,5,6,7,8,9

Code blocks

1

Binary Channel Bits

For Sub-Frames 0,1,2,3,4,5,6,7,8,9

Bits

1056

Max. Throughput

kbps

4.92

UE DL Category

M1, ≥ 0

Note 1: 2 symbols allocated to PDCCH

Note 2: Reference signal, synchronization signals and PBCH allocated as per TS 36.211 [4]

Note 3: The downlink subframes are scheduled at the 33th to 64th subframes every 96ms. Information bit payload is available at the 33th to 64th subframes with repetition. (Starting from the 0th subframe)

Note 4: Allocated PRB positions are {1, 2, 3, 4} within the assigned narrowband.

Note 5: MPDCCH are scheduled at the 0th to 31th subframes with repetition.
The allocated PRB positions are {1, 2, 3, 4} within the assigned narrowband. (Starting from the 0th subframe)

Table A.3.11.1-3: Additional PDSCH Reference Channel FDD and half-duplex FDD for R.83 FDD

Parameter

Unit

Values

Channel bandwidth

MHz

10

Allocated resource blocks (Note 4)

4

Allocated DL subframes per 192 subframes (Note 3)

64

Modulation

QPSK

Target Coding Rate

½

Information Bit Payload

For Sub-Frames 0,1,2,3,4,5,6,7,8,9

Bits

472

Number of Code Blocks

For Sub-Frames 0,1,2,3,4,5,6,7,8,9

Code blocks

1

Binary Channel Bits

For Sub-Frames 0,1,2,3,4,5,6,7,8,9

Bits

1056

Max. Throughput

kbps

2.46

UE DL Category

M1, ≥ 0

Note 1: 2 symbols allocated to PDCCH

Note 2: Reference signal, synchronization signals and PBCH allocated as per TS 36.211 [4]

Note 3: For RMC R.83 FDD, the downlink subframes are scheduled at the 65th to 128th subframes every 192ms. Information bit payload is available at the 65th to 128th subframes with repetition. (Starting from the 0th subframe)

Note 4: Allocated PRB positions are {1, 2, 3, 4} within the assigned narrowband.

Note 5: MPDCCH are scheduled at the 0th to 63th subframes with repetition for RMC R.83 FDD. The allocated PRB positions are {1, 2, 3, 4} within the assigned narrowband. (Starting from the 0th subframe)

A.3.11.2 TDD

Table A.3.11.2-1: Reference Channel TDD

Parameter

Unit

Value

Value

Reference channel

R.82 TDD

R.83 TDD

Number of transmitter antennas

2

2

Channel bandwidth

MHz

10

10

OFDM starting symbol (startSymbolLC)

symbols

2

2

Aggregation level

ECCE

16

24

DCI Format

6-1A

6-1B

Payload (without CRC)

Bits

32

18

PRB allocation

8-th ~11-th PRB

As specified in Test

Table A.3.11.2-2: Additional PDSCH Reference Channel TDD for R.82 TDD

Parameter

Unit

Values

Channel bandwidth

MHz

10

Uplink-Downlink Configuration

0

Allocated resource blocks (Note 4)

4

Allocated DL subframes per 160 subframes (Note 3)

16

Modulation

QPSK

Target Coding Rate

½

Information Bit Payload

For Sub-Frames 0,5

Bits

472

Number of Code Blocks

For Sub-Frames 0,5

Code blocks

1

Binary Channel Bits

For Sub-Frames 0,5

Bits

1056

Max. Throughput

kbps

2.95

UE DL Category

M1, ≥ 0

Note 1: 2 symbols allocated to PDCCH

Note 2: Reference signal, synchronization signals and PBCH allocated as per TS 36.211 [4]

Note 3: The PDSCH subframes are scheduled at the 16th to 31th downlink subframes with repetition every 160ms. (Starting from the 0th subframe)

Note 4: Allocated PRB positions are {1, 2, 3, 4} within the assigned narrowband.

Note 5: MPDCCH are scheduled at the 0th to 15th downlink subframes with repetition. The allocated PRB positions are {1, 2, 3, 4} within the assigned narrowband. (Starting from the 0th subframe)

Table A.3.11.2-3: Additional PDSCH Reference Channel TDD for R.83 TDD

Parameter

Unit

Values

Channel bandwidth

MHz

10

Uplink-Downlink Configuration

0

Allocated resource blocks (Note 4)

4

Allocated DL subframes per 320 subframes (Note 3)

32

Modulation

QPSK

Target Coding Rate

½

Information Bit Payload

For Sub-Frames 0,5

Bits

472

Number of Code Blocks

For Sub-Frames 0,5

Code blocks

1

Binary Channel Bits

For Sub-Frames 0,5

Bits

1056

Max. Throughput

kbps

1.475

UE DL Category

M1, ≥ 0

Note 1: 2 symbols allocated to PDCCH

Note 2: Reference signal, synchronization signals and PBCH allocated as per TS 36.211 [4]

Note 3: The PDSCH subframes are scheduled at the 32th to 63th downlink subframes with repetition every 320ms. (Starting from the 0th subframe)

Note 4: Allocated PRB positions are {1, 2, 3, 4} within the assigned narrowband.

Note 5: MPDCCH are scheduled at the 0th to 31th downlink subframes with repetition. The allocated PRB positions are {1, 2, 3, 4} within the assigned narrowband. (Starting from the 0th subframe)