A.2.2 Reference measurement channels for FDD
36.521-13GPPEvolved Universal Terrestrial Radio Access (E-UTRA)Part 1: Conformance testingRadio transmission and receptionRelease 17TSUser Equipment (UE) conformance specification
A.2.2.1 Full RB allocation
A.2.2.1.1 QPSK
Table A.2.2.1.1-1: Reference Channels for QPSK with full RB allocation
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
15 |
25 |
50 |
75 |
100 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
|
Target Coding rate |
1/3 |
1/3 |
1/3 |
1/3 |
1/5 |
1/6 |
|
Payload size |
Bits |
600 |
1544 |
2216 |
5160 |
4392 |
4584 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame (Note 1) |
1 |
1 |
1 |
1 |
1 |
1 |
|
Total number of bits per Sub-Frame (Note 1) |
Bits |
1728 |
4320 |
7200 |
14400 |
21600 |
28800 |
Total symbols per Sub-Frame |
864 |
2160 |
3600 |
7200 |
10800 |
14400 |
|
UE Category |
≥ 1 |
≥ 1 |
≥ 1 |
≥ 1 |
≥ 1 |
≥ 1 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) |
Table A.2.2.1.1-1a: Reference Channels for QPSK with full/maximum RB allocation for UE category 0
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
15 |
25 |
[36] |
[36] |
[36] |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
|
Target Coding rate |
1/3 |
1/5 |
1/8 |
[1/10] |
[1/10] |
[1/10] |
|
Payload size |
Bits |
600 |
872 |
904 |
[1000] |
[1000] |
[1000] |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame |
1 |
1 |
1 |
1 |
1 |
1 |
|
Total number of bits per Sub-Frame |
Bits |
1728 |
4320 |
7200 |
[10368] |
[10368] |
[10368] |
Total symbols per Sub-Frame |
864 |
2160 |
3600 |
[5184] |
[5184] |
[5184] |
|
UE Category |
0 |
0 |
0 |
0 |
0 |
0 |
|
NOTE 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). NOTE 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th, 6th, 12th, 13th, 14th, 20th, 21st, 22nd, 28th, 29th, 30th, 36th, 37th, and 38th subframes every 40ms. Information bit payload is available if uplink subframe is scheduled. |
Table A.2.2.1.1-1b: Reference Channels for QPSK with full/maximum RB allocation for UE category M1
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
6 |
6 |
6 |
6 |
6 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
|
Target Coding rate |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
|
Payload size |
Bits |
600 |
600 |
600 |
600 |
600 |
600 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame |
1 |
1 |
1 |
1 |
1 |
1 |
|
Total number of bits per Sub-Frame |
Bits |
1728 |
1728 |
1728 |
1728 |
1728 |
1728 |
Total symbols per Sub-Frame |
864 |
864 |
864 |
864 |
864 |
864 |
|
UE Category |
M1 |
M1 |
M1 |
M1 |
M1 |
M1 |
|
NOTE 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th and 6th subframes every 10ms for the channel bandwidth 5MHz/10MHz/15MHz/20MHz. For HD-FDD UE, the uplink subframes are scheduled at the 5th, 6th, and 7th subframes every 10ms for the channel bandwidth 1.4MHz/3MHz. Information bit payload is available if uplink subframe is scheduled. NOTE 3: For HD-FDD UE with |
Table A.2.2.1.1-1c: Reference Channels for QPSK with full/maximum RB allocation for UE UL category M2
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
12 |
24 |
24 |
24 |
24 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
|
Target Coding rate |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
|
Payload size |
Bits |
600 |
1224 |
2472 |
2472 |
2472 |
2472 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame (NOTE 1) |
1 |
1 |
1 |
1 |
1 |
1 |
|
Total number of bits per Sub-Frame |
Bits |
1728 |
3456 |
6912 |
6912 |
6912 |
6912 |
Total symbols per Sub-Frame |
864 |
1728 |
3456 |
3456 |
3456 |
3456 |
|
UE UL Category |
M2 |
M2 |
M2 |
M2 |
M2 |
M2 |
|
NOTE 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). NOTE 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th and 6th subframes every 10ms for the channel bandwidth 5MHz/10MHz/15MHz/20MHz. For HD-FDD UE, the uplink subframes are scheduled at the 5th, 6th and 7th subframes every 10ms for the channel bandwidth 1.4MHz/3MHz. Information bit payload is available if uplink subframe is scheduled. |
A.2.2.1.2 16-QAM
Table A.2.2.1.2-1: Reference Channels for 16-QAM with full RB allocation
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
15 |
25 |
50 |
75 |
100 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
16QAM |
16QAM |
16QAM |
16QAM |
16QAM |
16QAM |
|
Target Coding rate |
3/4 |
1/2 |
1/3 |
3/4 |
1/2 |
1/3 |
|
Payload size |
Bits |
2600 |
4264 |
4968 |
21384 |
21384 |
19848 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame (Note 1) |
1 |
1 |
1 |
4 |
4 |
4 |
|
Total number of bits per Sub-Frame |
Bits |
3456 |
8640 |
14400 |
28800 |
43200 |
57600 |
Total symbols per Sub-Frame |
864 |
2160 |
3600 |
7200 |
10800 |
14400 |
|
UE Category |
≥ 1 |
≥ 1 |
≥ 1 |
≥ 2 |
≥ 2 |
≥ 2 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) |
Table A.2.2.1.2-1a: Reference Channels for 16-QAM with maximum RB allocation for UE category 0
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
5 |
5 |
5 |
5 |
5 |
5 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
16QAM |
16QAM |
16QAM |
16QAM |
16QAM |
16QAM |
|
Target Coding rate |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
|
Payload size |
Bits |
872 |
872 |
872 |
872 |
872 |
872 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame |
1 |
1 |
1 |
1 |
1 |
1 |
|
Total number of bits per Sub-Frame |
Bits |
2880 |
2880 |
2880 |
2880 |
2880 |
2880 |
Total symbols per Sub-Frame |
720 |
720 |
720 |
720 |
720 |
720 |
|
UE Category |
0 |
0 |
0 |
0 |
0 |
0 |
|
NOTE 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). NOTE 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th, 6th, 12th, 13th, 14th, 20th, 21st, 22nd, 28th, 29th, 30th, 36th, 37th, and 38th subframes every 40ms. Information bit payload is available if uplink subframe is scheduled. |
Table A.2.2.1.2-1b: Reference Channels for 16-QAM with maximum RB allocation for UE category M1
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
5 |
5 |
5 |
5 |
5 |
5 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
16QAM |
16QAM |
16QAM |
16QAM |
16QAM |
16QAM |
|
Target Coding rate |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
|
Payload size |
Bits |
872 |
872 |
872 |
872 |
872 |
872 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame |
1 |
1 |
1 |
1 |
1 |
1 |
|
Total number of bits per Sub-Frame |
Bits |
2880 |
2880 |
2880 |
2880 |
2880 |
2880 |
Total symbols per Sub-Frame |
720 |
720 |
720 |
720 |
720 |
720 |
|
UE Category |
M1 |
M1 |
M1 |
M1 |
M1 |
M1 |
|
NOTE 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) NOTE 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th and 6th subframes every 10ms for the channel bandwidth 5MHz/10MHz/15MHz/20MHz. For HD-FDD UE, the uplink subframes are scheduled at the 5th, 6th, and 7th subframes every 10ms for the channel bandwidth 1.4MHz/3MHz. Information bit payload is available if uplink subframe is scheduled. |
Table A.2.2.1.2-1c: Reference Channels for 16-QAM with maximum RB allocation for UE UL category M2
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
12 |
24 |
24 |
24 |
24 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
16QAM |
16QAM |
16QAM |
16QAM |
16QAM |
16QAM |
|
Target Coding rate |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
1/3 |
|
Payload size |
Bits |
1032 |
2088 |
4264 |
4264 |
4264 |
4264 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame |
1 |
1 |
1 |
1 |
1 |
1 |
|
Total number of bits per Sub-Frame |
Bits |
3456 |
6912 |
13824 |
13824 |
13824 |
13824 |
Total symbols per Sub-Frame |
864 |
1728 |
3456 |
3456 |
3456 |
3456 |
|
UE Category |
M2 |
M2 |
M2 |
M2 |
M2 |
M2 |
|
NOTE 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). NOTE 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th and 6th subframes every 10ms for the channel bandwidth 5MHz/10MHz/15MHz/20MHz. For HD-FDD UE, the uplink subframes are scheduled at the 5th, 6th and 7th subframes every 10ms for the channel bandwidth 1.4MHz/3MHz. Information bit payload is available if uplink subframe is scheduled. |
A.2.2.1.3 64-QAM
Table A.2.2.1.3-1: Reference Channels for 64-QAM with full RB allocation
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
15 |
25 |
50 |
75 |
100 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
64QAM |
64QAM |
64QAM |
64QAM |
64QAM |
64QAM |
|
Target Coding rate |
3/4 |
3/4 |
3/4 |
3/4 |
3/4 |
3/4 |
|
Payload size |
Bits |
3752 |
9528 |
15840 |
31704 |
46888 |
63776 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame |
1 |
2 |
3 |
6 |
8 |
11 |
|
Total number of bits per Sub-Frame |
Bits |
5184 |
12960 |
21600 |
43200 |
64800 |
86400 |
Total symbols per Sub-Frame |
864 |
2160 |
3600 |
7200 |
10800 |
14400 |
|
UE Category (Note 2) |
5,8 |
5,8 |
5,8 |
5,8 |
5,8 |
5,8 |
|
UE UL Category (Note 2) |
5, 8, 13, 14 |
5, 8, 13, 14 |
5, 8, 13, 14 |
5, 8, 13, 14 |
5, 8, 13, 14 |
5, 8, 13, 14 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) Note2: If UE does not report UE UL category, then the applicability of reference channel is determined by UE category. If UE reports UE UL category, then the applicability of reference channel is determined by UE UL category. |
A.2.2.1.4 256 QAM
Table A.2.2.1.4-1: Reference Channels for 256 QAM with full RB allocation
Parameter |
Unit |
Value |
|||||
Channel bandwidth |
MHz |
1.4 |
3 |
5 |
10 |
15 |
20 |
Allocated resource blocks |
6 |
15 |
25 |
50 |
75 |
100 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
256QAM |
256QAM |
256QAM |
256QAM |
256QAM |
256QAM |
|
Target Coding rate |
3/4 |
3/4 |
3/4 |
3/4 |
3/4 |
3/4 |
|
Payload size |
Bits |
5160 |
12960 |
21384 |
42368 |
63776 |
84760 |
Transport block CRC |
Bits |
24 |
24 |
24 |
24 |
24 |
24 |
Number of code blocks per Sub-Frame (Note 1) |
1 |
3 |
4 |
8 |
11 |
15 |
|
Total number of bits per Sub-Frame |
Bits |
6912 |
17280 |
28800 |
57600 |
86400 |
115200 |
Total symbols per Sub-Frame |
864 |
2160 |
3600 |
7200 |
10800 |
14400 |
|
UE UL Category |
≥ 15 |
≥ 15 |
≥ 15 |
≥ 15 |
≥ 15 |
≥ 15 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) |
A.2.2.2 Partial RB allocation
For each channel bandwidth, various partial RB allocations are specified. The number of allocated RBs is chosen according to values specified in the Tx and Rx requirements. The single allocated RB case is included.
The allocated RBs are contiguous and start from one end of the channel bandwidth. A single allocated RB is at one end of the channel bandwidth.
A.2.2.2.1 QPSK
Table A.2.2.2.1-1: Reference Channels for QPSK with partial RB allocation
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Transport block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
QPSK |
1/3 |
72 |
24 |
1 |
288 |
144 |
≥ 1 |
|
1.4 – 20 |
2 |
12 |
QPSK |
1/3 |
176 |
24 |
1 |
576 |
288 |
≥ 1 |
|
1.4 – 20 |
3 |
12 |
QPSK |
1/3 |
256 |
24 |
1 |
864 |
432 |
≥ 1 |
|
1.4 – 20 |
4 |
12 |
QPSK |
1/3 |
392 |
24 |
1 |
1152 |
576 |
≥ 1 |
|
1.4 – 20 |
5 |
12 |
QPSK |
1/3 |
424 |
24 |
1 |
1440 |
720 |
≥ 1 |
|
3-20 |
6 |
12 |
QPSK |
1/3 |
600 |
24 |
1 |
1728 |
864 |
≥ 1 |
|
3-20 |
8 |
12 |
QPSK |
1/3 |
808 |
24 |
1 |
2304 |
1152 |
≥ 1 |
|
3-20 |
9 |
12 |
QPSK |
1/3 |
776 |
24 |
1 |
2592 |
1296 |
≥ 1 |
|
3-20 |
10 |
12 |
QPSK |
1/3 |
872 |
24 |
1 |
2880 |
1440 |
≥ 1 |
|
3-20 |
12 |
12 |
QPSK |
1/3 |
1224 |
24 |
1 |
3456 |
1728 |
≥ 1 |
|
5-20 |
15 |
12 |
QPSK |
1/3 |
1320 |
24 |
1 |
4320 |
2160 |
≥ 1 |
|
5-20 |
16 |
12 |
QPSK |
1/3 |
1384 |
24 |
1 |
4608 |
2304 |
≥ 1 |
|
5-20 |
18 |
12 |
QPSK |
1/3 |
1864 |
24 |
1 |
5184 |
2592 |
≥ 1 |
|
5-20 |
20 |
12 |
QPSK |
1/3 |
1736 |
24 |
1 |
5760 |
2880 |
≥ 1 |
|
5-20 |
24 |
12 |
QPSK |
1/3 |
2472 |
24 |
1 |
6912 |
3456 |
≥ 1 |
|
10-20 |
25 |
12 |
QPSK |
1/3 |
2216 |
24 |
1 |
7200 |
3600 |
≥ 1 |
|
10-20 |
27 |
12 |
QPSK |
1/3 |
2792 |
24 |
1 |
7776 |
3888 |
≥ 1 |
|
10-20 |
30 |
12 |
QPSK |
1/3 |
2664 |
24 |
1 |
8640 |
4320 |
≥ 1 |
|
10-20 |
32 |
12 |
QPSK |
1/3 |
2792 |
24 |
1 |
9216 |
4608 |
≥ 1 |
|
10-20 |
36 |
12 |
QPSK |
1/3 |
3752 |
24 |
1 |
10368 |
5184 |
≥ 1 |
|
10-20 |
40 |
12 |
QPSK |
1/3 |
4136 |
24 |
1 |
11520 |
5760 |
≥ 1 |
|
10-20 |
45 |
12 |
QPSK |
1/3 |
4008 |
24 |
1 |
12960 |
6480 |
≥ 1 |
|
10-20 |
48 |
12 |
QPSK |
1/3 |
4264 |
24 |
1 |
13824 |
6912 |
≥ 1 |
|
15 – 20 |
50 |
12 |
QPSK |
1/3 |
5160 |
24 |
1 |
14400 |
7200 |
≥ 1 |
|
15 – 20 |
54 |
12 |
QPSK |
1/3 |
4776 |
24 |
1 |
15552 |
7776 |
≥ 1 |
|
15 – 20 |
60 |
12 |
QPSK |
1/4 |
4264 |
24 |
1 |
17280 |
8640 |
≥ 1 |
|
15 – 20 |
64 |
12 |
QPSK |
1/4 |
4584 |
24 |
1 |
18432 |
9216 |
≥ 1 |
|
15 – 20 |
72 |
12 |
QPSK |
1/4 |
5160 |
24 |
1 |
20736 |
10368 |
≥ 1 |
|
20 |
75 |
12 |
QPSK |
1/5 |
4392 |
24 |
1 |
21600 |
10800 |
≥ 1 |
|
20 |
80 |
12 |
QPSK |
1/5 |
4776 |
24 |
1 |
23040 |
11520 |
≥ 1 |
|
20 |
81 |
12 |
QPSK |
1/5 |
4776 |
24 |
1 |
23328 |
11664 |
≥ 1 |
|
20 |
90 |
12 |
QPSK |
1/6 |
4008 |
24 |
1 |
25920 |
12960 |
≥ 1 |
|
20 |
96 |
12 |
QPSK |
1/6 |
4264 |
24 |
1 |
27648 |
13824 |
≥ 1 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) |
Table A.2.2.2.1-1a: Reference Channels for QPSK with partial RB allocation for UE category 0
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Trans-port block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
QPSK |
1/3 |
72 |
24 |
1 |
288 |
144 |
0 |
|
1.4 – 20 |
2 |
12 |
QPSK |
1/3 |
176 |
24 |
1 |
576 |
288 |
0 |
|
1.4 – 20 |
3 |
12 |
QPSK |
1/3 |
256 |
24 |
1 |
864 |
432 |
0 |
|
1.4 – 20 |
4 |
12 |
QPSK |
1/3 |
392 |
24 |
1 |
1152 |
576 |
0 |
|
1.4 – 20 |
5 |
12 |
QPSK |
1/3 |
424 |
24 |
1 |
1440 |
720 |
0 |
|
3-20 |
6 |
12 |
QPSK |
1/3 |
600 |
24 |
1 |
1728 |
864 |
0 |
|
3-20 |
8 |
12 |
QPSK |
1/3 |
808 |
24 |
1 |
2304 |
1152 |
0 |
|
3-20 |
9 |
12 |
QPSK |
1/3 |
776 |
24 |
1 |
2592 |
1296 |
0 |
|
3-20 |
10 |
12 |
QPSK |
1/3 |
872 |
24 |
1 |
2880 |
1440 |
0 |
|
3-20 |
12 |
12 |
QPSK |
1/4 |
840 |
24 |
1 |
3456 |
1728 |
0 |
|
5-20 |
15 |
12 |
QPSK |
1/5 |
872 |
24 |
1 |
4320 |
2160 |
0 |
|
5-20 |
16 |
12 |
QPSK |
1/5 |
904 |
24 |
1 |
4608 |
2304 |
0 |
|
5-20 |
18 |
12 |
QPSK |
1/6 |
776 |
24 |
1 |
5184 |
2592 |
0 |
|
5-20 |
20 |
12 |
QPSK |
1/6 |
872 |
24 |
1 |
5760 |
2880 |
0 |
|
5-20 |
24 |
12 |
QPSK |
1/8 |
872 |
24 |
1 |
6912 |
3456 |
0 |
|
10-20 |
25 |
12 |
QPSK |
1/8 |
904 |
24 |
1 |
7200 |
3600 |
0 |
|
10-20 |
27 |
12 |
QPSK |
1/8 |
968 |
24 |
1 |
7776 |
3888 |
0 |
|
10-20 |
30 |
12 |
QPSK |
1/10 |
808 |
24 |
1 |
8640 |
4320 |
0 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). Note 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th, 6th, 12th, 13th, 14th, 20th, 21st, 22nd, 28th, 29th, 30th, 36th, 37th, and 38th subframes every 40ms. Information bit payload is available if uplink subframe is scheduled. |
Table A.2.2.2.1-1b: Reference Channels for QK with partial RB allocation for UE category M1
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Trans-port block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
QPSK |
1/3 |
72 |
24 |
1 |
288 |
144 |
M1 |
|
1.4 – 20 |
2 |
12 |
QPSK |
1/3 |
176 |
24 |
1 |
576 |
288 |
M1 |
|
1.4 – 20 |
3 |
12 |
QPSK |
1/3 |
256 |
24 |
1 |
864 |
432 |
M1 |
|
1.4 – 20 |
4 |
12 |
QPSK |
1/3 |
392 |
24 |
1 |
1152 |
576 |
M1 |
|
1.4 – 20 |
5 |
12 |
QPSK |
1/3 |
424 |
24 |
1 |
1440 |
720 |
M1 |
|
3-20 |
6 |
12 |
QPSK |
1/3 |
600 |
24 |
1 |
1728 |
864 |
M1 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) Note 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th and 6thsubframes every 10ms for the channel bandwidth 5MHz/10MHz/15MHz/20MHz. For HD-FDD UE, the uplink subframes are scheduled at the 5th, 6th, and 7th subframes every 10ms for the channel bandwidth 1.4MHz/3MHz. Information bit payload is available if uplink subframe is scheduled. |
Table A.2.2.2.1-1c: Reference Channels for QPSK with partial RB allocation for UE UL category M2
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Trans-port block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
QPSK |
1/3 |
72 |
24 |
1 |
288 |
144 |
M2 |
|
1.4 – 20 |
2 |
12 |
QPSK |
1/3 |
176 |
24 |
1 |
576 |
288 |
M2 |
|
1.4 – 20 |
3 |
12 |
QPSK |
1/3 |
256 |
24 |
1 |
864 |
432 |
M2 |
|
1.4 – 20 |
4 |
12 |
QPSK |
1/3 |
392 |
24 |
1 |
1152 |
576 |
M2 |
|
1.4 – 20 |
5 |
12 |
QPSK |
1/3 |
424 |
24 |
1 |
1440 |
720 |
M2 |
|
3-20 |
6 |
12 |
QPSK |
1/3 |
600 |
24 |
1 |
1728 |
864 |
M2 |
|
3-20 |
9 |
12 |
QPSK |
1/3 |
776 |
24 |
1 |
2592 |
1296 |
M2 |
|
3-20 |
12 |
12 |
QPSK |
1/3 |
1032 |
24 |
1 |
3456 |
1728 |
M2 |
|
5-20 |
15 |
12 |
QPSK |
1/3 |
1320 |
24 |
1 |
4320 |
2160 |
M2 |
|
5-20 |
18 |
12 |
QPSK |
1/3 |
1864 |
24 |
1 |
5184 |
2592 |
M2 |
|
5-20 |
21 |
12 |
QPSK |
1/3 |
2216 |
24 |
1 |
6068 |
3024 |
M2 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). Note 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th and 6th subframes every 10ms for the channel bandwidth 5MHz/10MHz/15MHz/20MHz. For HD-FDD UE, the uplink subframes are scheduled at the 5th, 6th and 7th subframes every 10ms for the channel bandwidth 1.4MHz/3MHz. Information bit payload is available if uplink subframe is scheduled. |
A.2.2.2.2 16-QAM
Table A.2.2.2.2-1: Reference Channels for 16-QAM with partial RB allocation
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Transport block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
16QAM |
3/4 |
408 |
24 |
1 |
576 |
144 |
≥ 1 |
|
1.4 – 20 |
2 |
12 |
16QAM |
3/4 |
840 |
24 |
1 |
1152 |
288 |
≥ 1 |
|
1.4 – 20 |
3 |
12 |
16QAM |
3/4 |
1288 |
24 |
1 |
1728 |
432 |
≥ 1 |
|
1.4 – 20 |
4 |
12 |
16QAM |
3/4 |
1736 |
24 |
1 |
2304 |
576 |
≥ 1 |
|
1.4 – 20 |
5 |
12 |
16QAM |
3/4 |
2152 |
24 |
1 |
2880 |
720 |
≥ 1 |
|
3-20 |
6 |
12 |
16QAM |
3/4 |
2600 |
24 |
1 |
3456 |
864 |
≥ 1 |
|
3-20 |
8 |
12 |
16QAM |
3/4 |
3496 |
24 |
1 |
4608 |
1152 |
≥ 1 |
|
3-20 |
9 |
12 |
16QAM |
3/4 |
3880 |
24 |
1 |
5184 |
1296 |
≥ 1 |
|
3-20 |
10 |
12 |
16QAM |
3/4 |
4264 |
24 |
1 |
5760 |
1440 |
≥ 1 |
|
3-20 |
12 |
12 |
16QAM |
3/4 |
5160 |
24 |
1 |
6912 |
1728 |
≥ 1 |
|
5-20 |
15 |
12 |
16QAM |
1/2 |
4264 |
24 |
1 |
8640 |
2160 |
≥ 1 |
|
5-20 |
16 |
12 |
16QAM |
1/2 |
4584 |
24 |
1 |
9216 |
2304 |
≥ 1 |
|
5-20 |
18 |
12 |
16QAM |
1/2 |
5160 |
24 |
1 |
10368 |
2592 |
≥ 1 |
|
5-20 |
20 |
12 |
16QAM |
1/3 |
4008 |
24 |
1 |
11520 |
2880 |
≥ 1 |
|
5-20 |
24 |
12 |
16QAM |
1/3 |
4776 |
24 |
1 |
13824 |
3456 |
≥ 1 |
|
10-20 |
25 |
12 |
16QAM |
1/3 |
4968 |
24 |
1 |
14400 |
3600 |
≥ 1 |
|
10-20 |
27 |
12 |
16QAM |
1/3 |
4776 |
24 |
1 |
15552 |
3888 |
≥ 1 |
|
10-20 |
30 |
12 |
16QAM |
3/4 |
12960 |
24 |
3 |
17280 |
4320 |
≥ 2 |
|
10-20 |
32 |
12 |
16QAM |
3/4 |
13536 |
24 |
3 |
18432 |
4608 |
≥ 2 |
|
10-20 |
36 |
12 |
16QAM |
3/4 |
15264 |
24 |
3 |
20736 |
5184 |
≥ 2 |
|
10-20 |
40 |
12 |
16QAM |
3/4 |
16992 |
24 |
3 |
23040 |
5760 |
≥ 2 |
|
10-20 |
45 |
12 |
16QAM |
3/4 |
19080 |
24 |
4 |
25920 |
6480 |
≥ 2 |
|
10-20 |
48 |
12 |
16QAM |
3/4 |
20616 |
24 |
4 |
27648 |
6912 |
≥ 2 |
|
15 – 20 |
50 |
12 |
16QAM |
3/4 |
21384 |
24 |
4 |
28800 |
7200 |
≥ 2 |
|
15 – 20 |
54 |
12 |
16QAM |
3/4 |
22920 |
24 |
4 |
31104 |
7776 |
≥ 2 |
|
15 – 20 |
60 |
12 |
16QAM |
2/3 |
23688 |
24 |
4 |
34560 |
8640 |
≥ 2 |
|
15 – 20 |
64 |
12 |
16QAM |
2/3 |
25456 |
24 |
4 |
36864 |
9216 |
≥ 2 |
|
15 – 20 |
72 |
12 |
16QAM |
1/2 |
20616 |
24 |
4 |
41472 |
10368 |
≥ 2 |
|
20 |
75 |
12 |
16QAM |
1/2 |
21384 |
24 |
4 |
43200 |
10800 |
≥ 2 |
|
20 |
80 |
12 |
16QAM |
1/2 |
22920 |
24 |
4 |
46080 |
11520 |
≥ 2 |
|
20 |
81 |
12 |
16QAM |
1/2 |
22920 |
24 |
4 |
46656 |
11664 |
≥ 2 |
|
20 |
90 |
12 |
16QAM |
2/5 |
20616 |
24 |
4 |
51840 |
12960 |
≥ 2 |
|
20 |
96 |
12 |
16QAM |
2/5 |
22152 |
24 |
4 |
55296 |
13824 |
≥ 2 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) |
Table A.2.2.2.2-1a: Reference Channels for 16-QAM with partial RB allocation for UE category 0
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Transport block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
16QAM |
3/4 |
408 |
24 |
1 |
576 |
144 |
0 |
|
1.4 – 20 |
2 |
12 |
16QAM |
3/4 |
840 |
24 |
1 |
1152 |
288 |
0 |
|
1.4 – 20 |
4 |
12 |
16QAM |
2/5 |
904 |
24 |
1 |
2304 |
576 |
0 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). Note 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th, 6th, 12th, 13th, 14th, 20th, 21st, 22nd, 28th, 29th, 30th, 36th, 37th, and 38th subframes every 40ms. Information bit payload is available if uplink subframe is scheduled. |
Table A.2.2.2.2-1b: Reference Channels for 16-QAM with partial RB allocation for UE category M1
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Transport block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
16QAM |
1/2 |
256 |
24 |
1 |
576 |
144 |
M1 |
|
1.4 – 20 |
2 |
12 |
16QAM |
1/2 |
552 |
24 |
1 |
1152 |
288 |
M1 |
|
1.4 – 20 |
3 |
12 |
16QAM |
1/2 |
840 |
24 |
1 |
1728 |
432 |
M1 |
|
1.4 – 20 |
4 |
12 |
16QAM |
2/5 |
904 |
24 |
1 |
2304 |
576 |
M1 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit). Note 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th and 6thsubframes every 10ms for the channel bandwidth 5MHz/10MHz/15MHz/20MHz. For HD-FDD UE, the uplink subframes are scheduled at the 5th, 6th, and 7th subframes every 10ms for the channel bandwidth 1.4MHz/3MHz. Information bit payload is available if uplink subframe is scheduled. |
Table A.2.2.2.2-1c: Reference Channels for 16-QAM with partial RB allocation for UE UL category M2
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Transport block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
16QAM |
1/2 |
256 |
24 |
1 |
576 |
144 |
M2 |
|
1.4 – 20 |
2 |
12 |
16QAM |
1/2 |
552 |
24 |
1 |
1152 |
288 |
M2 |
|
1.4 – 20 |
3 |
12 |
16QAM |
1/2 |
840 |
24 |
1 |
1728 |
432 |
M2 |
|
1.4 – 20 |
4 |
12 |
16QAM |
1/2 |
1128 |
24 |
1 |
2304 |
576 |
M2 |
|
1.4 – 20 |
5 |
12 |
16QAM |
1/2 |
1416 |
24 |
1 |
2880 |
720 |
M2 |
|
3 – 20 |
6 |
12 |
16QAM |
1/2 |
1736 |
24 |
1 |
3456 |
864 |
M2 |
|
3 – 20 |
9 |
12 |
16QAM |
1/2 |
2600 |
24 |
1 |
5184 |
1296 |
M2 |
|
3 – 20 |
12 |
12 |
16QAM |
1/2 |
3496 |
24 |
1 |
6912 |
1728 |
M2 |
|
5 – 20 |
15 |
12 |
16QAM |
1/2 |
4264 |
24 |
1 |
8640 |
2160 |
M2 |
|
5 – 20 |
18 |
12 |
16QAM |
1/2 |
5160 |
24 |
1 |
10368 |
2592 |
M2 |
|
5 – 20 |
21 |
12 |
16QAM |
1/2 |
5992 |
24 |
1 |
12096 |
3024 |
M2 |
|
5 – 20 |
24 |
12 |
16QAM |
1/2 |
6968 |
24 |
2 |
13824 |
3456 |
M2 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) Note 2: For HD-FDD UE, the uplink subframes are scheduled at the 4th, 5th and 6th subframes every 10ms for the channel bandwidth 5MHz/10MHz/15MHz/20MHz. For HD-FDD , the uplink subframes are scheduled at the 5th, 6th, and 7th subframes every 10msfor the channel bandwidth 1.4MHz/3MHz. Information bit payload is available if uplink subframe is scheduled. |
A.2.2.2.3 64-QAM
Table A.2.2.2.3-1: Reference Channels for 64-QAM with partial RB allocation
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Trans-port block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE Category (Note 2) |
UE UL Category (Note 2) |
Unit |
MHz |
Bits |
Bits |
Bits |
||||||||
1.4 – 20 |
1 |
12 |
64QAM |
3/4 |
616 |
24 |
1 |
864 |
144 |
5,8 |
5, 8, 13, 14 |
|
1.4 – 20 |
2 |
12 |
64QAM |
3/4 |
1256 |
24 |
1 |
1728 |
288 |
5,8 |
5, 8, 13, 14 |
|
1.4 – 20 |
3 |
12 |
64QAM |
3/4 |
1864 |
24 |
1 |
2592 |
432 |
5,8 |
5, 8, 13, 14 |
|
1.4 – 20 |
4 |
12 |
64QAM |
3/4 |
2536 |
24 |
1 |
3456 |
576 |
5,8 |
5, 8, 13, 14 |
|
1.4 – 20 |
5 |
12 |
64QAM |
3/4 |
3112 |
24 |
1 |
4320 |
720 |
5,8 |
5, 8, 13, 14 |
|
3-20 |
6 |
12 |
64QAM |
3/4 |
3752 |
24 |
1 |
5184 |
864 |
5,8 |
5, 8, 13, 14 |
|
3-20 |
8 |
12 |
64QAM |
3/4 |
5160 |
24 |
1 |
6912 |
1152 |
5,8 |
5, 8, 13, 14 |
|
3-20 |
9 |
12 |
64QAM |
3/4 |
5736 |
24 |
1 |
7776 |
1296 |
5,8 |
5, 8, 13, 14 |
|
3-20 |
10 |
12 |
64QAM |
3/4 |
6200 |
24 |
2 |
8640 |
1440 |
5,8 |
5, 8, 13, 14 |
|
3-20 |
12 |
12 |
64QAM |
3/4 |
7480 |
24 |
2 |
10368 |
1728 |
5,8 |
5, 8, 13, 14 |
|
5-20 |
15 |
12 |
64QAM |
3/4 |
9528 |
24 |
2 |
12960 |
2160 |
5,8 |
5, 8, 13, 14 |
|
5-20 |
16 |
12 |
64QAM |
3/4 |
10296 |
24 |
2 |
13824 |
2304 |
5,8 |
5, 8, 13, 14 |
|
5-20 |
18 |
12 |
64QAM |
3/4 |
11448 |
24 |
2 |
15552 |
2592 |
5,8 |
5, 8, 13, 14 |
|
5-20 |
20 |
12 |
64QAM |
3/4 |
12576 |
24 |
3 |
17280 |
2880 |
5,8 |
5, 8, 13, 14 |
|
5-20 |
24 |
12 |
64QAM |
3/4 |
15264 |
24 |
3 |
20736 |
3456 |
5,8 |
5, 8, 13, 14 |
|
10-20 |
25 |
12 |
64QAM |
3/4 |
15840 |
24 |
3 |
21600 |
3600 |
5,8 |
5, 8, 13, 14 |
|
10-20 |
27 |
12 |
64QAM |
3/4 |
16992 |
24 |
3 |
23328 |
3888 |
5,8 |
5, 8, 13, 14 |
|
10-20 |
30 |
12 |
64QAM |
3/4 |
19080 |
24 |
4 |
25920 |
4320 |
5,8 |
5, 8, 13, 14 |
|
10-20 |
32 |
12 |
64QAM |
3/4 |
20616 |
24 |
4 |
27648 |
4608 |
5,8 |
5, 8, 13, 14 |
|
10-20 |
36 |
12 |
64QAM |
3/4 |
22920 |
24 |
4 |
31104 |
5184 |
5,8 |
5, 8, 13, 14 |
|
10-20 |
40 |
12 |
64QAM |
3/4 |
25456 |
24 |
5 |
34560 |
5760 |
5,8 |
5, 8, 13, 14 |
|
10-20 |
45 |
12 |
64QAM |
3/4 |
28336 |
24 |
5 |
38880 |
6480 |
5,8 |
5, 8, 13, 14 |
|
10-20 |
48 |
12 |
64QAM |
3/4 |
30576 |
24 |
5 |
41472 |
6912 |
5,8 |
5, 8, 13, 14 |
|
15 – 20 |
50 |
12 |
64QAM |
3/4 |
31704 |
24 |
6 |
43200 |
7200 |
5,8 |
5, 8, 13, 14 |
|
15 – 20 |
54 |
12 |
64QAM |
3/4 |
34008 |
24 |
6 |
46656 |
7776 |
5,8 |
5, 8, 13, 14 |
|
15 – 20 |
60 |
12 |
64QAM |
3/4 |
37888 |
24 |
7 |
51840 |
8640 |
5,8 |
5, 8, 13, 14 |
|
15 – 20 |
64 |
12 |
64QAM |
3/4 |
40576 |
24 |
7 |
55296 |
9216 |
5,8 |
5, 8, 13, 14 |
|
15 – 20 |
72 |
12 |
64QAM |
3/4 |
45352 |
24 |
8 |
62208 |
10368 |
5,8 |
5, 8, 13, 14 |
|
20 |
75 |
12 |
64QAM |
3/4 |
46888 |
24 |
8 |
64800 |
10800 |
5,8 |
5, 8, 13, 14 |
|
20 |
80 |
12 |
64QAM |
3/4 |
51024 |
24 |
9 |
69120 |
11520 |
5,8 |
5, 8, 13, 14 |
|
20 |
81 |
12 |
64QAM |
3/4 |
51024 |
24 |
9 |
69984 |
11664 |
5,8 |
5, 8, 13, 14 |
|
20 |
90 |
12 |
64QAM |
2/3 |
51024 |
24 |
9 |
77760 |
12960 |
5,8 |
5, 8, 13, 14 |
|
20 |
96 |
12 |
64QAM |
3/4 |
61664 |
24 |
11 |
82944 |
13824 |
5,8 |
5, 8, 13, 14 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) Note2: If UE does not report UE UL category, then the applicability of reference channel is determined by UE category. If UE reports UE UL category, then the applicability of reference channel is determined by UE UL category. |
A.2.2.2.4 256 QAM
Table A.2.2.2.4-1: Reference Channels for 256 QAM with partial RB allocation
Parameter |
Ch BW |
Allocated RBs |
DFT-OFDM Symbols per Sub-Frame |
Mod’n |
Target Coding rate |
Payload size |
Trans-port block CRC |
Number of code blocks per Sub-Frame (Note 1) |
Total number of bits per Sub-Frame |
Total symbols per Sub-Frame |
UE UL Category |
Unit |
MHz |
Bits |
Bits |
Bits |
|||||||
1.4 – 20 |
1 |
12 |
256QAM |
3/4 |
840 |
24 |
1 |
1152 |
144 |
≥ 15 |
|
1.4 – 20 |
2 |
12 |
256QAM |
3/4 |
1672 |
24 |
1 |
2304 |
288 |
≥ 15 |
|
1.4 – 20 |
3 |
12 |
256QAM |
3/4 |
2536 |
24 |
1 |
3456 |
432 |
≥ 15 |
|
1.4 – 20 |
4 |
12 |
256QAM |
3/4 |
3368 |
24 |
1 |
4608 |
576 |
≥ 15 |
|
1.4 – 20 |
5 |
12 |
256QAM |
3/4 |
4264 |
24 |
1 |
5760 |
720 |
≥ 15 |
|
3-20 |
6 |
12 |
256QAM |
3/4 |
5160 |
24 |
1 |
6912 |
864 |
≥ 15 |
|
3-20 |
8 |
12 |
256QAM |
3/4 |
6712 |
24 |
2 |
9216 |
1152 |
≥ 15 |
|
3-20 |
9 |
12 |
256QAM |
3/4 |
7736 |
24 |
2 |
10368 |
1296 |
≥ 15 |
|
3-20 |
10 |
12 |
256QAM |
3/4 |
8504 |
24 |
2 |
11520 |
1440 |
≥ 15 |
|
3-20 |
12 |
12 |
256QAM |
3/4 |
10296 |
24 |
2 |
13824 |
1728 |
≥ 15 |
|
5-20 |
15 |
12 |
256QAM |
3/4 |
12960 |
24 |
3 |
17280 |
2160 |
≥ 15 |
|
5-20 |
16 |
12 |
256QAM |
3/4 |
13536 |
24 |
3 |
18432 |
2304 |
≥ 15 |
|
5-20 |
18 |
12 |
256QAM |
3/4 |
15264 |
24 |
3 |
20736 |
2592 |
≥ 15 |
|
5-20 |
20 |
12 |
256QAM |
3/4 |
16992 |
24 |
3 |
23040 |
2880 |
≥ 15 |
|
5-20 |
24 |
12 |
256QAM |
3/4 |
20616 |
24 |
4 |
27648 |
3456 |
≥ 15 |
|
10-20 |
25 |
12 |
256QAM |
3/4 |
21384 |
24 |
4 |
28800 |
3600 |
≥ 15 |
|
10-20 |
27 |
12 |
256QAM |
3/4 |
22920 |
24 |
4 |
31104 |
3888 |
≥ 15 |
|
10-20 |
30 |
12 |
256QAM |
3/4 |
25456 |
24 |
5 |
34560 |
4320 |
≥ 15 |
|
10-20 |
32 |
12 |
256QAM |
3/4 |
27376 |
24 |
5 |
36864 |
4608 |
≥ 15 |
|
10-20 |
36 |
12 |
256QAM |
3/4 |
30576 |
24 |
6 |
41472 |
5184 |
≥ 15 |
|
10-20 |
40 |
12 |
256QAM |
3/4 |
34008 |
24 |
6 |
46080 |
5760 |
≥ 15 |
|
10-20 |
45 |
12 |
256QAM |
3/4 |
37888 |
24 |
7 |
51840 |
6480 |
≥ 15 |
|
10-20 |
48 |
12 |
256QAM |
3/4 |
40576 |
24 |
8 |
55296 |
6912 |
≥ 15 |
|
15 – 20 |
50 |
12 |
256QAM |
3/4 |
42368 |
24 |
8 |
57600 |
7200 |
≥ 15 |
|
15 – 20 |
54 |
12 |
256QAM |
3/4 |
46888 |
24 |
8 |
62208 |
7776 |
≥ 15 |
|
15 – 20 |
60 |
12 |
256QAM |
3/4 |
51024 |
24 |
9 |
69120 |
8640 |
≥ 15 |
|
15 – 20 |
64 |
12 |
256QAM |
3/4 |
55056 |
24 |
9 |
73728 |
9216 |
≥ 15 |
|
15 – 20 |
72 |
12 |
256QAM |
3/4 |
61664 |
24 |
11 |
82944 |
10368 |
≥ 15 |
|
20 |
75 |
12 |
256QAM |
3/4 |
63776 |
24 |
11 |
86400 |
10800 |
≥ 15 |
|
20 |
80 |
12 |
256QAM |
3/4 |
68808 |
24 |
12 |
92160 |
11520 |
≥ 15 |
|
20 |
81 |
12 |
256QAM |
3/4 |
68808 |
24 |
12 |
93312 |
11664 |
≥ 15 |
|
20 |
90 |
12 |
256QAM |
3/4 |
76208 |
24 |
13 |
103680 |
12960 |
≥ 15 |
|
20 |
96 |
12 |
256QAM |
3/4 |
81176 |
24 |
14 |
110592 |
13824 |
≥ 15 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) |
A.2.2.3 Reference measurement channels for sustained downlink data rate provided by lower layers
Table A.2.2.3-1: Uplink Reference Channels for sustained data-rate test (FDD)
Parameter |
Unit |
Value |
|||||
Reference Channel |
R.1-1 FDD |
R.1-2 FDD |
R.1-3 FDD |
R.1-3A FDD |
R.1-4 FDD |
R.1-4B FDD |
|
Channel Bandwidth |
MHz |
10 |
10 |
20 |
10 |
20 |
15 |
Allocated Resource Blocks |
40 |
40 |
90 |
40(Note 2) |
90 |
60 |
|
Allocated Sub-Frames per Radio-Frame |
10 |
10 |
10 |
10 |
10 |
10 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
12 |
12 |
12 |
|
Modulation |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
QPSK |
|
Coding Rate |
0.31 |
0.31 |
0.31 |
0.31 |
0.31 |
0.31 |
|
Information Bit Payload per Sub-Frame |
Bits |
3496 |
3496 |
7992 |
3496 |
7992 |
5352 |
Number of Code Blocks per Sub-Frame |
1 |
1 |
2 |
1 |
2 |
2 |
|
Modulation Symbols per Sub-Frame |
5760 |
5760 |
12960 |
5760 |
12960 |
5760 |
|
Binary Channel Bits per Sub-Frame |
11520 |
11520 |
25920 |
11520 |
25920 |
17260 |
|
Max Throughput over 1 Radio-Frame |
Mbps |
3.496 |
3.496 |
7.992 |
3.496 |
7.992 |
5.352 |
UE Category |
≥ 1 |
≥ 1 |
≥ 2 |
≥ 1 |
≥ 2 |
≥ 1 |
|
Note 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) Note 2: RB-s 5-44 allocated with PUSCH. Note 3: RB-s 5-94 allocated with PUSCH. Note 4: RB-s 7-66 allocated with PUSCH. |
A.2.2.4 subPRB allocation
The location of allocated RB for subPRB allocation is chosen according to values specified in the Tx requirements.
Table A.2.2.4-1: Reference Channels for SubPRB allocation
Parameter |
Unit |
Value |
||
Channel bandwidth |
MHz |
1.4 – 20 |
1.4 – 20 |
1.4 – 20 |
Allocated resource blocks |
1 |
1 |
1 |
|
Number of subcarriers |
2 out of 3 |
3 |
6 |
|
DFT-OFDM Symbols per Sub-Frame |
12 |
12 |
12 |
|
Modulation |
π/2 BPSK |
QPSK |
QPSK |
|
Target Coding rate |
1/3 |
1/3 |
1/3 |
|
Payload size |
Bits |
32 |
72 |
72 |
Transport block CRC |
Bits |
24 |
24 |
24 |
Number of code blocks |
1 |
1 |
1 |
|
Total number of bits per resource unit |
Bits |
192 |
288 |
288 |
Total symbols per resource unit |
192 |
144 |
144 |
|
Tx time |
ms |
8 |
4 |
2 |
UE UL Category |
M1/M2 |
M1/M2 |
M1/M2 |
|
NOTE 1: If more than one Code Block is present, an additional CRC sequence of L = 24 Bits is attached to each Code Block (otherwise L = 0 Bit) |