80 Generic Access default conditions, message contents and macros
3GPP51.010-1Mobile Station (MS) conformance specificationPart 1: Conformance specificationTS
80.1 Default test conditions
The following default test conditions shall apply if not stated otherwise within an individual test description.
80.1.1 Unlicensed Radio Access
80.1.1.1 IEEE 802.11
First access point.
Setting |
|
Channel |
7 |
SSID |
GAN_1 |
SSID-Broadcast |
On |
Ciphering |
Off |
Mode |
Infrastructure |
Second access point.
Setting |
|
Channel |
3 |
SSID |
GAN_2 |
SSID-Broadcast |
On |
Ciphering |
Off |
Mode |
Infrastructure |
80.1.1.2 Bluetooth
Setting |
|
Profile |
PAN |
80.1.2 Protocol Settings
80.1.2.1 Dynamic Host Configuration Protocol – DHCP
Setting |
|
Server IP-Address |
192.168.11.1 |
Port |
67 |
Client (Transport) IP Range Pool |
192.168.11.10 – 15 |
Address Mask |
255.255.255.0 |
Default Gateway |
192.168.11.1 |
80.1.2.2 Domain Name System – DNS
80.1.2.2.1 Public DNS Server
Setting |
|
Server IP-Address |
192.168.11.16 |
Port |
53 |
The following entries should be used:
FQDN |
IP |
|
Provisioning SEGW |
psgw.gan.mnc001.mcc001.3gppnetwork.org |
192.168.11.32 |
Default SEGW |
dsgw.default.gan |
192.168.11.33 |
Serving SEGW |
ssgw.serving.gan |
192.168.11.34 |
80.1.2.2.2 DNS associated with GANC
Setting |
|
Server IP-Address |
172.16.0.144 |
Port |
53 |
The following entries should be used:
FQDN |
IP |
|
Provisioning GANC |
gan.mnc001.mcc001.3gppnetwork.org |
172.16.0.192 |
Default GANC |
gan.default.gan |
172.16.0.193 |
Serving GANC |
gan.serving.gan |
172.16.0.194 |
80.1.2.3 Secure Gateway (SEGW)
FQDN |
IP |
|
Provisioning SEGW |
psgw.gan.mnc001.mcc001.3gppnetwork.org |
192.168.11.32 |
Default SEGW |
dsgw.default.gan |
192.168.11.33 |
Serving SEGW |
ssgw.serving.gan |
192.168.11.34 |
80.1.2.4 Generic Access Network Controller (GANC)
FQDN |
IP |
|
Provisioning GANC |
gan.mnc001.mcc001.3gppnetwork.org |
172.16.0.192 |
Default GANC |
gan.default.gan |
172.16.0.193 |
Serving GANC |
gan.serving.gan |
172.16.0.194 |
The TCP port used for Discovery and Registration is port number 14001 (see 44.318: 12.2.1)
80.1.2.5 Secure Internet Protocol – IPsec
All cryptographic suites must be supported on SS side.
The certificates specified in annex A9 shall be used for authentication of the SS by the MS.
Setting |
|
Client (Local) IP Range Pool |
172.16.0.202 -217 |
80.2 Default message contents
80.3 Macros
80.3.1 Overview
The present document presents macros for Generic Access test cases. It is intended to be a working document forming part of the Generic Access Test Specifications.
80.3.1.1 Definition
A macro is a name or sentence, possibly followed by an argument list, that is equated to a text to which it is to be expanded, possibly with the substitution of actual arguments.
Macros may be used to simplify the writing and reading of the test cases or to avoid the repetition of common sentences, message contents or message sequences. The macros defined in this subclause can be used throughout the test cases.
The definition of the macros is done in alphabetical order.
80.3.1.2 Syntax
80.3.1.2.1 Message contents
Any macro referencing message contents shall use the following table:
Macro reference (arguments) |
||
(P)SI |
Information Element |
Value/Remarks |
The table must contain:
Macro reference: word or sentence that gives the name to the macro. It may include a list of arguments with actual values for some IE’s.
(P)SI: the System Information and Packet System Information messages whose content is referenced. Several (P)SIs can be referenced in this column. The defined IE value(s) refers to the (P)SI(s) in the same row.
Information Element: IE which value is specified.
Value/Remarks: value and any other comment specific to the IE’s. In particular, the mapping between an argument value and its coding shall be specified in this column (see note).
NOTE: If possible, only the meaning of the value will be shown and not the value itself; this avoids updating when the core specifications are modified.
80.3.1.2.2 Message sequence
Any macro referencing message contents shall use the following table:
Step |
Direction |
Message |
Comments |
{ Macro reference } |
Macro (arguments) |
||
The table must contain:
Macro reference: word or sentence that assigns the name to the macro. It may include a list of arguments with actual values for some parameters used within the macro.
Step: Number of the message. Letters may be used for general values: the same rules as in 3GPP TS 11.10 apply.
Direction: it must be either:
– "MS SS": for an uplink message or a macro containing only uplink message(s);
– "SS MS": for a downlink message or a macro containing only downlink message(s);
– "SS MS": for a macro containing both uplink and downlink message(s);
– "MS": for an action performed on the mobile side; or
– "SS": for an action performed on the system simulator side.
Message: Message name or macro reference.
Comments: any other comment specific to the message. In particular, value of certain bits/fields of the corresponding message.
The symbol ‘’ can be used to indicate that the previous and following message or sequence of messages (both previous and following must appear) is repeated an unknown number of times, probably referenced with a letter on the ‘step’ column.
80.3.2 Default message contents
80.3.3 Macro message sequences
80.3.3.1 Location Update Procedure
80.3.3.1.1 GAN A/Gb Mode Location Update Procedure
Step |
Direction |
Message |
Comments |
{ GAN A/Gb Mode Location Update Procedure } |
|||
1 |
MS SS |
GA-CSR REQUEST |
|
2 |
SS MS |
GA-CSR REQUEST ACCEPT |
|
3 |
MS SS |
GA-CSR UPLINK DIRECT TRANSFER |
Containing L3 (MM) Location Update Request |
4 |
SS MS |
GA-CSR DOWNLINK DIRECT TRANSFER |
Containing L3 (MM) Authentication Request |
5 |
MS SS |
GA-CSR UPLINK DIRECT TRANSFER |
Containing L3 (MM) Authentication Response |
6 |
SS MS |
GA-CSR DOWNLINK DIRECT TRANSFER |
Containing L3 (MM) Location Update Accept |
A6 (Optional) |
MS SS |
GA-CSR UPLINK DIRECT TRANSFER |
Containing L3 (MM) TMSI Reallocation Complete This step is executed only when assigned mobile identity is of type TMSI |
7 |
SS MS |
GA-CSR RELEASE |
NOTE: Only in case the MS performed GPRS suspension procedure prior to the CS session, then the GPRS RESUMPTION IE shall be present with ACK field set to 1. |
8 |
MS SS |
GA-CSR RELEASE COMPLETE |
80.3.3.1.2 GAN Iu Mode Location Update Procedure
Step |
Direction |
Message |
Comments |
{ GAN Iu Mode Location Update Procedure } |
|||
1 |
MS SS |
GA-RRC REQUEST |
|
2 |
SS MS |
GA-RRC REQUEST ACCEPT |
|
3 |
MS SS |
GA-RRC UPLINK DIRECT TRANSFER |
Containing L3 (MM) Location Update Request |
4 |
SS MS |
GA-RRC DOWNLINK DIRECT TRANSFER |
Containing L3 (MM) Authentication Request |
5 |
MS SS |
GA-RRC UPLINK DIRECT TRANSFER |
Containing L3 (MM) Authentication Response |
6 |
SS MS |
GA-RRC DOWNLINK DIRECT TRANSFER |
Containing L3 (MM) Location Update Accept |
A6 (Optional) |
MS SS |
GA-RRC UPLINK DIRECT TRANSFER |
Containing L3 (MM) TMSI Reallocation Complete This step is executed only when assigned mobile identity is of type TMSI |
7 |
SS MS |
GA-RRC RELEASE |
|
8 |
MS SS |
GA-RRC RELEASE COMPLETE |
80.4 Test PDP contexts
PDP context 1: same as PDP context 1 in section 40.5.