27.9 MS recognizing the priority order of the PLMN selector list

3GPP51.010-1Mobile Station (MS) conformance specificationPart 1: Conformance specificationTS

27.9.1 Definition

The PLMN selector list gives in priority order the preferred PLMNs on which the MS shall register. The list is stored on the SIM in the EFPLMNsel. Update and deletion of PLMNs may be performed by the subscriber by the use of the PIN.

27.9.2 Conformance requirement

When registering onto a VPLMN the MS shall take into account the priority order of the PLMNs in the preferred list on the SIM.

3GPP TS 02.11, subclause 3.2.2.2.

27.9.3 Test purpose

To verify that the PLMN with the higher priority (defined by its position in EFPLMNsel) takes precedence over the PLMN with the lower priority when the MS performs a network selection.

27.9.4 Method of test

27.9.4.1 Initial conditions

The SS transmits on two BCCHs, with the following network parameters:

Attach / Detach

LAI

Access Control

MCC

MNC (2-digit)

MNC (3-digit)

LAC

BCCH 1

disabled

234

33

334

0001

unrestricted

BCCH 2

disabled

234

34

345

0001

unrestricted

The default SIM is used with the following exception:

EFPLMNsel (PLMN Selector)

Logically: MCC: 234

MNC:

PLMN

1st

2nd

32nd

33rd

34th

2-digit MNC

01

02

32

34

33

3-digit MNC

012

023

323

345

334

Coding:

B1

B2

B3

B4

B5

B6

2-digit MNC

32

F4

10

32

F4

20

3-digit MNC

32

24

10

32

34

20

B94

B95

B96

B97

B98

B99

B100

B101

B102

2-digit MNC

32

F4

23

32

F4

43

32

F4

33

3-digit MNC

32

34

23

32

54

43

32

44

33

The SIM is installed into the ME and the MS is set to automatic PLMN selection mode.

27.9.4.2 Procedure

a) The MS is powered on.

b) After receipt of a CHANNEL REQUEST from the MS, the SS sends IMMEDIATE ASSIGNMENT to the MS.

c) After receipt of a LOCATION UPDATE REQUEST from the MS, the SS sends LOCATION UPDATE ACCEPT with:

LAI-MCC: 234

LAI-MNC 34 or 345 (see Note 0)

TMSI: "34567890".

to the MS

d) After receipt of a TMSI REALLOCATION COMPLETE from the MS, the SS sends CHANNEL RELEASE to the MS.

e) The MS is soft powered down.

27.9.5 Test requirement

1) After step b) the MS shall send LOCATION UPDATE REQUEST containing an MCC/MNC of 234/34 or 234/345 (see Note 0) to the SS.

2) After step c) the MS shall respond with TMSI REALLOCATION COMPLETE.

3) After step e) the SIM shall contain the following values:

EFLOCI (Location Information)

Logically: LAI-MCC: 234

LAI-MNC: 34 or 345 (See Note 0)

TMSI: "34567890"

Coding:

B1

B2

B3

B4

B5

B6

B7

B8

B9

B10

B11

2-digit MNC

34

56

78

90

32

F4

43

xx

xx

xx

00

3-digit MNC

34

56

78

90

32

54

43

xx

xx

xx

00