Foreword1 Scope2 References3 Definitions, conventions and applicability4 Test Equipment5 Testing methodology in general (layers 1, 2, and 3)6 Reference test methods7 Implicit testing8 Measurement uncertainty9 Format of tests10 Generic call set up procedures11 General tests11.1 Verification of support and non-support of services (multiple numbering scheme or ISDN)11.2 Verification of support of the single numbering scheme11.3 Verification of non-support of services (Advice of Charge Charging (AoCC))11.4 Verification of non-support of services (call hold)11.5 Verification of non-support of services (multiparty)11.6 Verification of non-support of feature (Fixed Dialling Number (FDN))11.7 IMEI Security11.8 Coding of the Bearer Capability information element11.8 Coding of the Bearer Capability information element11.8.1 Network to MS Direction11.8.2 MS to SS direction12 Transceiver13 Transmitter13.1 Frequency error and phase error13.1a Frequency error in VAMOS configuration13.1b Frequency error and phase error in TIGHTER configuration \ with legacy TSC in VAMOS mode13.2b Frequency error under multipath and interference conditions in TIGHTER configuration \ with legacy TSC in VAMOS mode13.2 Frequency error under multipath and interference conditions13.2a Frequency error under multipath and interference conditions in VAMOS configuration13.3 Transmitter output power and burst timing13.4 Output RF spectrum13.5 Void13.6 Frequency error and phase error in HSCSD multislot configurations13.7 Transmitter output power and burst timing in HSCSD configurations13.8 Output RF spectrum in HSCSD multislot configuration13.9 Output RF spectrum for MS supporting the R-GSM or ER-GSM frequency band13.10 Void13.11 Void13.12 Void13.13 Void13.14 Void13.15 Void13.16 GPRS transmitter tests13.17 EGPRS transmitter tests13.17.1 Frequency error and Modulation accuracy in EGPRS Configuration13.17.1a Frequency error and Modulation accuracy in EGPRS2A Configuration13.17.1b Frequency error and Modulation accuracy in EC-GSM-IoT Configuration13.17.1c Phase and amplitude coherency in EC-GSM-IoT Configuration13.17.2 Frequency error under multipath and interference conditions13.17.2a Frequency error under multipath and interference conditions for EGPRS2A configuration13.17.3 EGPRS Transmitter output power13.17.3a Transmitter output power in EGPRS2A configuration13.17.3b Transmitter output power in for EC-GSM-IoT configuration13.17.4 Output RF spectrum in EGPRS configuration13.17.4a Output RF spectrum in EGPRS2A configuration13.17.5 Void14 Receiver14 Receiver14.1 Bad frame indication14.2 Reference sensitivity14.2.1 Reference sensitivity - TCH/FS14.2.1a Reference sensitivity - TCH/FS in TIGHTER configuration14.2.2 Reference sensitivity - TCH/HS (Speech frames)14.2.2a Reference sensitivity - TCH/HS in TIGHTER configuration14.2.3 Reference sensitivity - FACCH/F14.2.3a Reference sensitivity - FACCH/F in TIGHTER configuration14.2.4 Reference sensitivity - FACCH/H14.2.4a Reference sensitivity - FACCH/H in TIGHTER configuration14.2.5 Reference sensitivity - full rate data channels14.2.6 Reference sensitivity - half rate data channels14.2.7 Reference sensitivity - TCH/EFS14.2.7a Reference sensitivity - TCH/EFS in TIGHTER configuration14.2.8 Reference sensitivity - full rate data channels in multislot configuration14.2.9 Reference sensitivity - TCH/FS for MS supporting the R-GSM or ER-GSM band14.2.10 Reference sensitivity - TCH/AFS14.2.10a Reference sensitivity - TCH/AFS in TIGHTER configuration14.2.11 to 14.2.17 Void14.2.18 Reference sensitivity - TCH/AHS14.2.18a Reference sensitivity - TCH/AHS in TIGHTER configuration14.2.19 Reference sensitivity - TCH/AFS-INB14.2.20 Reference sensitivity - TCH/AHS-INB14.2.21 Reference sensitivity – O-TCH/AHS14.2.22 Reference sensitivity – O-TCH/WFS14.2.23 Reference sensitivity – O-TCH/WHS14.2.24 Reference sensitivity - TCH/WFS14.2.24a Reference sensitivity - TCH/WFS in TIGHTER configuration14.2.25 Reference sensitivity – Repeated FACCH/F14.2.26 Reference sensitivity – Repeated SACCH14.2.27 Reference sensitivity - TCH/FS – DARP Phase II14.2.28 Reference sensitivity TCH/HS in VAMOS configuration14.2.29 Reference sensitivity TCH/EFS in VAMOS configuration14.2.30 Reference sensitivity TCH/AFS in VAMOS configuration14.2.31 Reference sensitivity TCH/AHS in VAMOS configuration14.2.32 Reference sensitivity TCH/WFS in VAMOS configuration14.2.33 Reference sensitivity FACCH/F performance in VAMOS configuration14.2.34 Reference sensitivity – FACCH/H Performance in VAMOS configuration14.2.35 Reference sensitivity SACCH performance in VAMOS configuration14.2.36 Reference sensitivity – Repeated SACCH in VAMOS configuration14.2.37 Reference sensitivity – Repeated FACCH/F in VAMOS configuration14.3 Usable receiver input level range14.4 Co-channel rejection14.5 Adjacent channel rejection14.6 Intermodulation rejection14.7 Blocking and spurious response14.8 AM suppression14.9 Paging performance at high input levels14.10 Performance of the Codec Mode Request Generation for Adaptive Multi-Rate Codecs14.11 DARP Phase 1 Speech bearer tests14.12 DARP Phase 1 Signalling bearer tests14.13 Void14.14 Void14.15 Void14.16 GPRS receiver tests14.1714.18 EGPRS receiver tests14.18 EGPRS receiver tests14.18.1 Minimum Input level for Reference Performance14.18.1a Minimum Input level for Reference Performance in EGPRS2A Configuration14.18.1b Minimum Input level for Reference Performance in TIGHTER configuration14.18.1c Minimum Input level for Reference Performance – in TIGHTER configuration14.18.1d Minimum Input level for Reference Performance in for EC-GSM-IoT Configuration14.18.2 Co-channel rejection14.18.2a Co-channel rejection in EGPRS2A14.18.2b Co-channel rejection – in TIGHTER configuration14.18.2c Co-channel rejection in EGPRS2A with TIGHTER configuration14.18.2d Co-channel rejection in EC-GSM-IoT Configuration14.18.3 Adjacent channel rejection14.18.3a Adjacent channel rejection in EGPRS2A configuration14.18.3b Adjacent channel rejection for packet channels in TIGHTER configuration14.18.3c Adjacent channel rejection in EGPRS2A configuration with TIGHTER configuration14.18.3d Adjacent channel rejection in DLMC configuration14.18.3e Adjacent channel rejection in EC-GSM-IoT Configuration14.18.4 Intermodulation rejection14.18.4a Intermodulation rejection in EGPRS2A configuration14.18.5 Blocking and spurious response14.18.5a Blocking and spurious response in EGPRS2A configuration14.18.5b Blocking and spurious response in DLMC configuration14.18.6 EGPRS Usable receiver input level range14.18.6a EGPRS Usable receiver input level range in EGPRS2A Configuration14.18.7 Incremental Redundancy Performance14.18.7a Incremental Redundancy Performance in EGPRS2A configuration14.18.7b Incremental Redundancy Performance in EC-GSM-IoT Configuration14.18.8 DARP Phase 1 EGPRS tests14.18.9 DARP Phase II EGPRS tests14.18.10 Latency Reductions14.19 DARP Phase II Speech bearer tests14.20 VAMOS speech bearer tests14.20.1 TCH HS – VDTS-1,VDTS-2/3 and VDTS-414.20.2 TCH EFS – VDTS-1, VDTS-2/3 and VDTS-414.20.3 TCH AFS – VDTS-1, VDTS-2/3 and VDTS-414.20.4 TCH AHS – VDTS-1,VDTS-2/3 and VDTS-414.20.5 TCH WFS – VDTS-1, VDTS-2/3 and VDTS-414.20.6 FACCH/F – VDTS-114.20.7 FACCH/H – VDTS-114.20.8 SACCH – VDTS-114.20.9 Repeated FACCH/F – VDTS-114.20.10 Repeated SACCH – VDTS-114.20.11 Downlink DTX TCH / AHS in VAMOS configuration15 Timing advance and absolute delay16 Reception time tracking speed17 Access times during handover18 Temporary reception gaps19 Channel release after unrecoverable errors20 Cell selection and reselection20 Cell selection and reselection20.1 Cell selection20.2 Cell selection with varying signal strength values20.3 Basic cell reselection20.4 Cell reselection using TEMPORARY_OFFSET, CELL_RESELECT_OFFSET, POWER_OFFSET and PENALTY_TIME parameters20.5 Cell reselection using parameters transmitted in the System Information type 2bis, type 2ter, type 7 and type 8 messages20.6 Cell reselection timings20.7 Priority of cells20.8 Cell reselection when C1 (serving cell) < 0 for 5 s20.9 Running average of the surrounding cell BCCH carrier signal levels20.10 Running average of the serving cell BCCH carrier signal level20.11 Updating the list of six strongest neighbour carriers and decoding the BCCH information of a new carrier on the list20.12 Decoding the BCCH information of the neighbour carriers on the list of six strongest neighbour carriers20.13 Decoding the BSIC of the neighbour carriers on the list of six strongest neighbour carriers20.14 Emergency calls20.15 Cell reselection due to MS rejection "LA not allowed"20.16 Downlink signalling failure20.17 Cell selection if no suitable cell found in 10 s20.18 Cell reselection due to MS rejection "Roaming not allowed in this LA"20.19 Cell selection on release of SDCCH and TCH20.20 Multiband cell selection and reselection20.21 R-GSM or ER-GSM cell selection and reselection20.22 GPRS Cell Selection and Reselection20.23 Void20.24 SoLSA Cell Selection and Reselection20.25 Intersystem Cell Reselection20.26 Decoding of BCCH including information for UTRAN TDD cells21 Received signal measurements22 Transmit power control timing and confirmation23 Single frequency reference24 Tests of the layer 1 signalling functions25 Tests of the layer 2 signalling functions26 Testing of layer 3 functions26 Testing of layer 3 functions26.1 Default conditions and structured sequence of tests26.2 Initial tests26.3 Test of MS functions in idle mode26.4 Lower layer failures in layer 3 testing26.5 Handling of unknown, unforeseen, and erroneous protocol data, and of parallel transactions26.6 Test of the elementary procedures for radio resource management26.6 Test of the elementary procedures for radio resource management26.6.1 Immediate assignment26.6.2 Test of paging26.6.3 Test of measurement report26.6.4 Test of the channel assignment procedure26.6.5 Test of handover26.6.6 Test of frequency redefinition26.6.7 Test of the channel mode modify procedure26.6.8 Test of ciphering mode setting26.6.9 Test of additional assignment26.6.10 Test of partial release26.6.11 Test of classmark26.6.12 Test of channel release26.6.13 Test of starting time26.6.14 Default contents of GSM 900 layer 3 messages for RR tests26.6.15 Default contents of DCS 1 800 layer 3 messages for RR tests26.6.16 Default contents of GSM 450 layer 3 messages for RR tests26.6.17 Default contents of GSM 480 layer 3 messages for RR tests26.6.18 Default contents of PCS 1 900 layer 3 messages for RR tests26.6.19 Default contents of GSM 750 layer 3 messages for RR tests26.6.20 Default contents of GSM 850 layer 3 messages for RR tests26.6.21 Default contents of GSM 710 layer 3 messages for RR tests26.6.22 Default contents of T-GSM 810 layer 3 messages for RR tests26.6.23 Test of Repeated SACCH26.7 Elementary procedures of mobility management26.7 Elementary procedures of mobility management26.7.0 Default contents of messages26.7.1 TMSI reallocation26.7.2 Authentication26.7.3 Identification26.7.4 Location updating26.7.5 MM connection26.7.6 Network Identity and Time zone (NITZ)26.8 Tests related to circuit switched call control26.8.1 Circuit switched Call Control (CC) state machine verification26.8.2 Call Re-establishment26.8.3 User to user signalling26.8.4 Default contents of message26.9 Structured procedures26.10 E-GSM or R-GSM or ER-GSM signalling26.11 Multiband signalling26.11.1 General considerations26.11.2 Multiband signalling / RR26.11.3 Multiband signalling / MM26.11.4 Multiband signalling / CC26.11.5 Multiband signalling / Structured procedures26.11.6 Multiband signalling / Default messages contents26.12 Enhanced Full Rate signalling26.13 Multislot signalling26.13.1 Multislot signalling / RR26.13.2 Multislot signalling / CC26.13.3 Multislot signalling / Structured procedures26.14 VGCS and VBS Tests26.14 VGCS and VBS Tests26.14.1 VGCS-VBS / Notification26.14.2 VGCS-VBS / Paging26.14.3 VGCS-VBS / RR Procedures26.14.4 VGCS-VBS / Uplink Access and Uplink Reply Procedures26.14.5 VGCS-VBS / Leaving Group Receive or Group Transmit Mode26.14.6 VGCS-VBS / GCC-BCC Procedures26.14.7 VGCS-VBS / Error Handling26.14.8 VGCS-VBS / Structured Procedures26.14.9 VGCS-VBS / Cell change26.14.10 VGCS-VBS / Default Message Contents26.14.11 VGCS-VBS / User-to-Dispatcher Information26.15 SoLSA signalling26.16 Adaptive Multi Rate Signalling26.17 Adaptive Multi Rate Signalling – 8PSK26.18 Dynamic ARFCN mapping tests26.19 AMR WB - signalling26.20 Enhanced Power Control26.21 VAMOS Signalling26.22 Test of other features27 Testing of the SIM/ME interface27 Testing of the SIM/ME interface27.1 MS identification by short IMSI27.2 MS identification by short TMSI27.3 MS identification by long TMSI27.4 MS identification by long IMSI, TMSI updating and cipher key sequence number assignment27.5 Forbidden PLMNs, location updating and undefined cipher key27.5a Forbidden PLMNs, GPRS attach27.6 MS updating forbidden PLMNs27.6a MS updating forbidden PLMNs - for GPRS27.7 MS deleting forbidden PLMNs27.7a MS deleting forbidden PLMNs - for GPRS27.8 MS updating the PLMN selector list27.9 MS recognizing the priority order of the PLMN selector list27.10 MS access control management27.10a MS access control management for GPRS27.11 Exchange protocol tests27.12 Evaluation of directory characteristics27.13 Mechanical tests27.14 Secret code usage27.15 Abbreviated Dialling Numbers (ADN)27.16 MMI reaction to SIM status encoding27.17 Electrical tests27.18 Fixed Dialling Number (FDN)27.19 Phase identification27.20 SIM presence detection27.21 Advice of Charge (AoC)28 Test of autocalling restrictions29 Testing of bearer services30 Speech teleservices31 Test of supplementary services31 Test of supplementary services31.1 Number identification supplementary services31.2 Call offering supplementary services31.3 Call completion supplementary services31.4 Multi-party supplementary services31.5 Community of interest supplementary services31.6 Charging supplementary services31.7 Additional information transfer supplementary services31.8 Call restriction supplementary services31.9 Handling of undefined (future) GSM supplementary services31.10 MMI input for USSD31.11 Specific message contents and ASN.1 codings31.12 eMLPP Service31.13 Explicit Call Transfer (ECT)31.14 User-to-User Signalling (UUS)31.15 Follow Me (FM)32 Testing of speech transcoding functions33 Mobile station features34 Short message service (SMS)35 Low battery voltage detection36 Individual equipment type requirements and interworking - special conformance testing functions37 to 39 Void40 GPRS default conditions, message contents and macros41 GPRS Paging, TBF establishment/release and DCCH related procedures41.1 RR / Paging41.2 RR procedures on CCCH related to temporary block flow establishment41.3 MAC/RLC Release41.4 Void41.5 Dual transfer mode41.6 Intra SGSN PS Handover41.7 PEO - Power Efficiency Operation41.8 EC-GSM-IoT procedures42 Test of Medium Access Control (MAC) protocol42.1 Test of Medium Access Control (MAC) Procedures42.2 Void42.3 Dynamic Allocation in Packet Transfer Mode42.4 Measurement reports and Cell change order procedures42.4 Measurement reports and Cell change order procedures42.4.1 Measurement reports42.4.1.4 Network Control measurement reporting / Uplink transfer / Continuation in Idle mode.42.4.2 Cell change order procedures42.4.3 Macros and Default Message contents42.4.4 Cell Change Order Procedures without PBCCH42.4.5 Network Assisted Cell Change42.4.6 Packet Enhanced Measurement Report (PEMR)42.4.7 Inter-RAT (GPRS to UTRAN) Cell Change Order42.4.8 NC2 Procedures42.5 Downlink Transfer42.6 MAC Modes whilst in DTM42.7 Packet assignment/ TA Value42.8 Dynamic allocation/ Downlink Transfer with Uplink TBF Establishment/ T316842.9 Extended Dynamic Allocation in Packet Transfer Mode42.10 EC-GSM-IoT43 RLC Test Cases44 Test case requirements for GPRS mobility management44.1 Default conditions and default messages44.2 Elementary procedures of GPRS mobility management44.2.1 GPRS attach procedure44.2.2 GPRS detach procedure44.2.3 Routing area updating procedure44.2.4 P-TMSI reallocation44.2.5 GPRS authentication and ciphering44.2.6 Identification procedure44.2.7 GMM READY timer handling44.2.8 DTM mobility management44.2.9 Network Identity and Timezone (NITZ)44.2.10 MS Radio Access Capability Interrogation44.2.11 Cell Notification45 Session Management Procedures46 LLC and SNDCP Tests47 Dual Transfer Mode48 to 49 Void50 EGPRS Default Conditions, Message Contents and Macros51 EGPRS Paging, TBF establishment/release and DCCH related procedures51.1 RR / Paging51.2 RR procedures on CCCH related to temporary block flow establishment51.3 MAC/RLC Release51.4 Void51.5 EGPRS Dual transfer mode51.6 Dynamic ARFCN mapping tests52 EGPRS Test of Medium Access Control (MAC) protocol52.1 Test of Medium Access Control (MAC) Procedures52.2 Void52.3 EGPRS Testcases for Dynamic Allocation in Packet Transfer Mode52.4 Void52.5 EGPRS Downlink Transfer52.6 EGPRS Packet Access for signalling52.7 Void52.8 One phase access/ CONTENTION_RESOLUTION_TLLI52.9 Extended Dynamic Allocation in Packet Transfer Mode52.1053 Test of EGPRS Radio Link Control (RLC) Protocol53 Test of EGPRS Radio Link Control (RLC) Protocol53.1 Acknowledged Mode53.1.1 Acknowledged Mode/ Uplink TBF53.1.2 Acknowledged Mode/ Downlink TBF53.2 Unacknowledged Mode53.3 Default Message Contents and Macros54 to 56 Void57 EGPRS Dual Transfer Mode58 Void58a Latency reductions58a Latency reductions58a.1 FANR Fast Ack/Nack reporting58a.2 EGPRS test cases for RTTI Configuration58b Downlink Dual Carrier and Downlink Multi Carrier58b.1 Downlink Dual Carrier Reconfiguration58b.2 Concurrent Downlink Dual Carrier TBF58b.2.1 Concurrent Downlink Dual Carrier TBF/ Reconfigure Frequency Parameters58b.2.1a Concurrent Downlink Multi Carrier TBF/ Reconfigure Frequency Parameters58b.2.2 Concurrent Downlink Dual Carrier TBF/ Change in Modulation and Coding Schemes58b.2.2a Concurrent Downlink Multi Carrier TBF/ Change in Modulation and Coding Schemes58b.2.3 Concurrent Downlink Dual Carrier TBF/ Frequency Hopping58b.2.3a Concurrent Downlink Multi Carrier TBF / Frequency Hopping58b.2.4 Concurrent Downlink Dual Carrier TBF/ Downlink Dual Carrier Configuration / Channel Quality Reporting58b.2.4a Concurrent Downlink Multi Carrier TBF / Downlink Multi Carrier Configuration / Channel Quality Reporting58b.2.5 Concurrent Downlink Dual Carrier TBF / Downlink Dual Carrier Configuration in Dual Transfer Mode58b.2.6 Concurrent Downlink Dual Carrier TBF/ Extended Dynamic Allocation58b.2.6a Concurrent Downlink Multi Carrier TBF / Extended Dynamic allocation58b.2.7 Concurrent Downlink Dual Carrier TBF / Downlink Dual Carrier Configuration/ Extended RLC/MAC control message segmentation58b.2.7a Concurrent Downlink Multi Carrier TBF / Downlink Multi Carrier Configuration/ Extended RLC/MAC control message segmentation58b.2.8 Concurrent Downlink Dual Carrier TBF/ Dual Carrier Uplink TBF/ USF granularity 458b.2.8a Concurrent Downlink Multi Carrier TBF/ Multi Carrier Uplink TBF/ USF granularity 458b.2.9 Concurrent Downlink Multi Carrier TBF / Frequency Hopping, Carrier selection58b.2.10 Concurrent Downlink Multi Carrier TBF / Downlink Multi Carrier Configuration / Channel Quality Reporting with UFPS58b.2.1158b.2.1258b.2.13 Concurrent Downlink DLMC configuration using Non-contiguous intra-band reception58b.2.14 Concurrent Downlink DLMC configuration using Inter-band reception58b.3 DLDC Configuration / Abnormal Case58c EGPRS258d EFTA58e DTR59 Void60 Inter-system hard handover from GSM to UTRAN61-69 Void70 Location Services70.1 Default conditions during LCS tests70.2 EOTD Network Induced Location Request70.3 Mobile Originating Location Request70.4 Mobile Terminated Location Request for Mobiles supporting MS-Assisted EOTD70.5 Void70.6 E-OTD Timing Measurement Accuracy70.7 Assisted GPS Network Induced Tests70.8 Assisted GPS Mobile Originated Tests70.9 Assisted GPS Mobile Terminated Tests70.10 Conventional GPS Network Induced Tests70.11 A-GPS Minimum Performance tests70.12 Assisted GNSS General Procedures70.13 Assisted GNSS Network Induced Location Request (NI-LR)70.14 Assisted GNSS Mobile Originated Location Request (MO-LR)70.14.1 MO-LR / Idle mode for Mobiles Supporting MS-Assisted GNSS70.14.2 MO-LR / Idle mode for Mobiles Supporting MS-Based GNSS / Assistance Data Request70.14.3 MO-LR / Idle mode for Mobiles Supporting MS-Based GNSS / Location Estimate Request70.14.4 MO-LR / Dedicated Mode for Mobiles Supporting MS-Assisted GNSS70.14.5 MO-LR / Dedicated Mode for Mobiles Supporting MS-Based GNSS / Assistance Data Request70.14.6 MO-LR / Dedicated Mode for Mobiles Supporting MS-Based GNSS / Location Estimate request70.14.770.14.8 MO-LR / Location Error70.14.9 MO-LR / Multiple RRLP Requests with Same Reference Number and Extended Reference Number70.14.10 MO-LR / Multiple RRLP Requests with Different Reference Number70.14.11 MO-LR / Multiple RRLP Requests with Different Extended Reference Number70.14.12 MO-LR / RR Management Commands70.15 Assisted GNSS Mobile Terminated Location Request (MT-LR)70.16 A-GNSS Minimum Performance tests80 Generic Access default conditions, message contents and macros81 GAN Discovery and Registration Procedures82 GAN CS Domain Procedures83 GAN PS Domain Procedures84 GAN Iu Mode Procedures90 Text Telephony (TTY) ServicesA1.1 General Conditions (GC)A1.2 Normal and extreme Test Conditions (TC)A3.1 Protocol Implementation Conformance Statement (PICS)A3.2 Protocol Implementation Extra Information for Testing (PIXIT)A3.2.0 IntroductionA3.2.1 Basic characteristicsA3.2.2 Man machine interfaceA3.2.3 Electrical Man Machine Interface (EMMI)A3.2.4 Digital Audio Interface (DAI)A3.2.5 Characteristics related to bearer services or teleservicesA3.2.6 International mobile station equipment identityA3.2.7 Receiver intermediate frequenciesA3.2.8 Artificial earA3.2.8 Artificial earA4.1 IntroductionA4.2 Default Parameters for the test SIMA4.3 Default settings for the Elementary Files (EFs)A5.1 IntroductionA5.2 Standard test signalsA5.3 SS functional requirementsA5.4 SIM simulator functional requirementsA6.1 Recommended Timing Accuracy Test Environment (Unassisted)A6.2 Recommended Timing Accuracy Test Environment (Assisted)A7.1 Statistical testing of receiver performanceA7.2 Statistical testing of 2 D position error and TTFF for A-GPS and A-GNSS Minimum Performance test casesA9.1 Files relating to GAN certificate for testingA10.1 Details on Repeated SACCH TestingA10.1 Details on Repeated SACCH Testing 51.6 Dynamic ARFCN mapping tests 3GPP51.010-1Mobile Station (MS) conformance specificationPart 1: Conformance specificationTS Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM 51.6.1 Void