11.8.1 Network to MS Direction
3GPP51.010-1Mobile Station (MS) conformance specificationPart 1: Conformance specificationTS
11.8.1.1 BS 21 to 26 – Asynchronous Service
11.8.1.1.1 BS 21
11.8.1.1.1.1 3,1 kHz Audio, Transparent
BC GSM = 04 07 AX X8 81 21 X1 4X 81
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement: Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
0 |
Info. Transfer Cap.: 3,1 kHz Audio |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
1 |
1 |
Structure: Unstructured |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
0 |
Negotiation of Intermediate Rate Requested: No meaning |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: I.440 / I.450 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
1 |
Synchronous / Asynchronous: Asynchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
x |
Number of Stop Bits, Depending of the TE Configuration |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
x |
Number of Data Bits, Depending of the TE Configuration |
||||||||
0 |
0 |
0 |
1 |
User Rate: 0,3 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
0 |
Intermediate Rate: 8kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
x |
x |
x |
Parity, Depending of the TE Configuration |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
0 |
Connection Element: Transparent |
|||||||
0 |
0 |
0 |
0 |
1 |
Modem Type: V.21 |
The following configuration is also authorized:
Structure in Octet 4: |
– |
0 |
0 |
– |
– |
– |
– |
– |
SDU Integrity |
Intermediate rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
11.8.1.1.1.2 3,1 kHz Audio, Non Transparent
BC GSM = 04 0X X2 XX 81 21 X1 6X A1 (CX)
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
x |
x |
x |
x |
Length (7 or 8) depending on presence of octet 7. |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement: Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
0 |
Info. Transfer Cap.: 3,1 kHz Audio |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
0 |
0 |
Structure: SDU Integrity |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
x |
Negotiation of Intermediate Rate Requested |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: I.440 / I.450 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
1 |
Synchronous / Asynchronous: Asynchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
x |
Number of Stop Bits, Depending of the TE Configuration |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
x |
Number of Data Bits, Depending of the TE Configuration |
||||||||
0 |
0 |
0 |
1 |
User Rate: 0,3 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
1 |
Intermediate Rate: 16kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
x |
x |
x |
Parity, Depending of the TE Configuration |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
1 |
Connection Element: Non transparent |
|||||||
0 |
0 |
0 |
0 |
1 |
Modem Type: V.21 |
||||
Octet 7 |
1 |
Extension |
|||||||
(note) |
1 |
0 |
Layer 2 Id. |
||||||
0 |
1 |
x |
0 |
0 |
User Inform. layer 2 protocol, Depending on the TE Configuration |
||||
NOTE: Because Modem Type is V.21, Octet7 shall be present. |
Depending of the type of flow control supported by the TE, the coding of octet 7 is different. The value ISO 6429 (0 1000) means "Inband flow control" and the value COPnoFLCT (0 1100) means "No flow control".
The following configuration is also authorized:
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
11.8.1.1.1.3 UDI, Transparent
BC GSM = 04 07 X1 X8 89 21 X1 4X 80
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement: Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
0 |
1 |
Info. Transfer Cap.: UDI |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
1 |
1 |
Structure: Unstructured |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
0 |
Negotiation of Intermediate Rate Requested: No meaning |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
1 |
Rate Adaptation: V.110 |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: I.440 / I.450 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
1 |
Synchronous / Asynchronous: Asynchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
x |
Number of Stop Bits, Depending of the TE Configuration |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
x |
Number of Data Bits, Depending of the TE Configuration |
||||||||
0 |
0 |
0 |
1 |
User Rate: 0,3 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
0 |
Intermediate Rate: 8kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
x |
x |
x |
Parity, Depending of the TE Configuration |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
0 |
Connection Element: Transparent |
|||||||
0 |
0 |
0 |
0 |
0 |
Modem Type: None |
The following configuration is also authorized:
Structure in Octet 4: |
– |
0 |
0 |
– |
– |
– |
– |
– |
SDU Integrity |
Intermediate rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
11.8.1.1.1.4 UDI, Non Transparent
BC GSM = 04 0X X1 XX 89 21 X1 6X A0 (CX)
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
x |
x |
x |
x |
Length (7 or 8) depending on presence of octet 7. |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
0 |
1 |
Info. Transfer Cap.: UDI |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
0 |
0 |
Structure: SDU Integrity |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
x |
Negotiation of Intermediate Rate Requested |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
1 |
Rate Adaptation: V.110 |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: I.440 / I.450 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
1 |
Synchronous / Asynchronous: Asynchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
x |
Number of Stop Bits, Depending of the TE Configuration |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
x |
Number of Data Bits, Depending of the TE Configuration |
||||||||
0 |
0 |
0 |
1 |
User Rate: 0,3 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
1 |
Intermediate Rate: 16kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
x |
x |
x |
Parity, Depending of the TE Configuration |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
1 |
Connection Element: Non Transparent |
|||||||
0 |
0 |
0 |
0 |
0 |
Modem Type: None |
||||
Octet 7 (need not be present) |
1 |
Extension |
|||||||
1 |
0 |
Layer 2 Id. |
|||||||
0 |
1 |
x |
0 |
0 |
User Inform. layer 2 protocol, Depending of the TE Configuration |
Depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, it means "outband flow control". If octet 7 is present, the value ISO 6429 (0 1000) means "Inband flow control" and the value COPnoFLCT (0 1100) means "No flow control".
The following configuration is also authorized:
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
11.8.1.1.2 BS 22
Same as BS 21 except:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
0 |
1,2 kbit/s |
|
If different from "none", |
Modem Type Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
0 |
Modem V.22 |
In case of 3,1 kHz Audio non transparent service, depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, it means "outband flow control".
11.8.1.1.3 BS 24
Same as BS 21 except:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
1 |
2,4 kbit/s |
|
If different from "none", |
Modem Type Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
1 |
Modem V.22bis |
In case of 3,1 kHz Audio non transparent service, depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, it means "outband flow control".
11.8.1.1.4 BS 25
Same as BS 21 except:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
0 |
4,8 kbit/s |
|
If different from "none", |
Modem Type Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
In case of 3,1 kHz Audio non transparent service, depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, it means "outband flow control".
11.8.1.1.5 BS 26
Same as BS 21 except:
NIRR in Octet 4 |
– |
– |
– |
– |
– |
– |
0 |
– |
no meaning |
|
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
1 |
9,6 kbit/s |
|
Interm. Rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
|
If different from "none", |
Modem Type Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
In case of 3,1kHz Audio non transparent service, depending of the type of flow control supported by the TE, octet 7 is present or not. If not present, it means "outband flow control".
11.8.1.1.6 BS 23
For MOC only.
11.8.1.2 BS 31 to 34 – Synchronous Service
11.8.1.2.1 BS 32
11.8.1.2.1.1 3,1 kHz Audio, Transparent, non-X.32 case
BC GSM = 04 07 X2 X8 81 20 13 43 83
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
0 |
Info. Transfer Cap.: 3,1 kHz Audio |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
1 |
1 |
Structure: Unstructured |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
0 |
Negotiation of Intermediate Rate Requested: No meaning |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: I.440 / I.450 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
0 |
Synchronous / Asynchronous: Synchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
0 |
Number of Stop Bits: NA |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
1 |
Number of Data Bits: NA |
||||||||
0 |
0 |
1 |
1 |
User Rate: 2,4 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
0 |
Intermediate Rate: 8kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
0 |
1 |
1 |
Parity: NA |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
0 |
Connection Element: Transparent |
|||||||
0 |
0 |
0 |
1 |
1 |
Modem Type: V.22 bis |
11.8.1.2.1.2 UDI, Transparent mode, non-X.32 case
BC GSM = 04 07 X1 X8 8X 20 13 43 80
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
0 |
1 |
Info. Transfer Cap.: UDI |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
1 |
1 |
Structure: Unstructured |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
0 |
Negotiation of Intermediate Rate Requested: No meaning |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
1 |
Rate Adaptation: V.110 |
|||||||
0 |
x |
x |
Signalling Access Protocol |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
0 |
Synchronous / Asynchronous: Synchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
0 |
Number of Stop Bits: NA |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
1 |
Number of Data Bits: NA |
||||||||
0 |
0 |
1 |
1 |
User Rate: 2,4 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
0 |
Intermediate Rate: 8kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
0 |
1 |
1 |
Parity: NA |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
0 |
Connection Element: Transparent |
|||||||
0 |
0 |
0 |
0 |
0 |
Modem Type: none |
If the mobile station supports only SAP I.440/450, the System Simulator sets SAP field value to::
SAP in Octet 5: |
– |
– |
– |
– |
– |
0 |
0 |
1 |
I.440/I.450 |
If the MS supports only SAP X.21, SAP field is set to:
SAP in Octet 5: |
– |
– |
– |
– |
– |
0 |
1 |
0 |
X.21 |
Else, the MS supports both values and SAP is set to:
either:
SAP in Octet 5: |
– |
– |
– |
– |
– |
0 |
0 |
1 |
I.440/I.450 |
or:
SAP in Octet 5: |
– |
– |
– |
– |
– |
0 |
1 |
0 |
X.21 |
11.8.1.2.1.3 3,1 kHz Audio, Transparent mode, X.32 case (Packet Service)
BC GSM = 04 07 X2 X8 86 20 13 43 83
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
0 |
Info. Transfer Cap.: 3,1 kHz Audio |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
1 |
1 |
Structure: unstructured |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
0 |
Negotiation of Intermediate Rate Requested: No meaning |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
1 |
1 |
0 |
Signalling Access Protocol: X.32 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
0 |
Synchronous / Asynchronous: Synchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
0 |
Number of Stop Bits: NA |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
1 |
Number of Data Bits: NA |
||||||||
0 |
0 |
1 |
1 |
User Rate: 2,4 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
0 |
Intermediate Rate: 8kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
0 |
1 |
1 |
Parity: NA |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
0 |
Connection Element: Transparent |
|||||||
0 |
0 |
0 |
1 |
1 |
Modem Type: V.22 bis |
The following configuration is also authorized:
Structure in Octet 4: |
– |
0 |
0 |
– |
– |
– |
– |
– |
SDU Integrity |
Intermediate rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
UIL2P in Octet 7 |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
X.25 |
11.8.1.2.1.4 3,1 kHz Audio, Non Transparent mode, X.32 case (Packet Service)
BC GSM = 04 07 X2 XX 86 20 13 63 A3 C6
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
0 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
0 |
Info. Transfer Cap.: 3,1 kHz Audio |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
0 |
0 |
Structure: SDU integrity |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
x |
Negotiation of Intermediate Rate Requested |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
1 |
1 |
0 |
Signalling Access Protocol: X.32 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
0 |
Synchronous / Asynchronous: Synchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
0 |
Number of Stop Bits: NA |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
1 |
Number of Data Bits: NA |
||||||||
0 |
0 |
1 |
1 |
User Rate: 2,4 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
1 |
Intermediate Rate: 16kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
0 |
1 |
1 |
Parity: NA |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
1 |
Connection Element: Non Transparent |
|||||||
0 |
0 |
0 |
1 |
1 |
Modem Type: V.22 bis |
||||
Octet 7 |
1 |
Extension |
|||||||
1 |
0 |
Layer 2 Id. |
|||||||
0 |
0 |
1 |
1 |
0 |
X.25 |
The following configuration is also authorized:
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
11.8.1.2.1.5 UDI, Non Transparent mode, X.32 case (Packet Service)
BC GSM = 04 08 X1 XX 96 20 13 63 A0 C6
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
0 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
0 |
1 |
Info. Transfer Cap.: UDI |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
0 |
0 |
Structure: SDU integrity |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
x |
Negotiation of Intermediate Rate Requested |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
1 |
0 |
Rate Adaptation: X.31 flagstuffing |
|||||||
1 |
1 |
0 |
Signalling Access Protocol: X.32 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
0 |
Synchronous / Asynchronous: Synchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
0 |
Number of Stop Bits: NA |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
1 |
Number of Data Bits: NA |
||||||||
0 |
0 |
1 |
1 |
User Rate: 2,4 kbit/s |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
1 |
Intermediate Rate: 16kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
0 |
1 |
1 |
Parity: NA |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
1 |
Connection Element: Non Transparent |
|||||||
0 |
0 |
0 |
0 |
0 |
Modem Type: None |
||||
Octet 7 |
1 |
Extension |
|||||||
1 |
0 |
Layer 2 Id. |
|||||||
0 |
0 |
1 |
1 |
0 |
X.25 |
11.8.1.2.2 BS 31
For non X.32 case only, same as BS 32 except:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
0 |
1,2 kbit/s |
|
If different from "none", |
Modem Type Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
0 |
Modem V.22 |
BS31 for Packet Service does not exist.
11.8.1.2.3 BS 33
Same as BS 32 except:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
0 |
4,8 kbit/s |
|
If different from "none", |
Modem Type Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
11.8.1.2.4 BS 34
Same as BS 32 except:
NIRR in Octet 4 |
– |
– |
– |
– |
– |
– |
0 |
– |
no meaning |
|
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
1 |
9,6 kbit/s |
|
Interm. Rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
|
If different from "none", |
Modem Type Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
11.8.1.3 BS 61 – Alternate Speech / Data
The first BC in the Setup message is coded "Speech": 04 01 A0.
The repeat Indicator in the Setup message is coded "Circular for successive selection (alternate)": D1.
The second BC in the Setup message is coded as described below.
11.8.1.3.1 Speech/Asynchronous Data, Transparent
BC GSM = 04 07 X2 X8 81 21 XX XX 8X
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
0 |
Info. Transfer Cap.: 3,1 kHz Audio |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
1 |
1 |
Structure: Unstructured |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
0 |
Negotiation of Intermediate Rate Requested: No meaning |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: I.440 / I.450 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
1 |
Synchronous / Asynchronous: Asynchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
x |
Number of Stop Bits, Depending of the TE Configuration |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
x |
Number of Data Bits, Depending of the TE Configuration |
||||||||
x |
x |
x |
x |
User Rate |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
x |
Intermediate Rate |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
x |
x |
x |
Parity, Depending of the TE Configuration |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
0 |
Connection Element: Transparent |
|||||||
0 |
x |
x |
x |
x |
Modem Type |
Depending of the user rate supported by the MS, the user rate, the modem type and the intermediate rate change:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
0 |
1 |
0,3 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
0 |
1 |
Modem V.21 |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
0 |
1,2 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
0 |
Modem V.22 |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
1 |
2,4 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
1 |
Modem V.22bis |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
0 |
4,8 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
NIRR in Octet 4 |
– |
– |
– |
– |
– |
– |
0 |
– |
no meaning |
|
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
1 |
9,6 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
The following configuration is also authorized:
Structure in Octet 4: |
– |
0 |
0 |
– |
– |
– |
– |
– |
SDU Integrity |
Intermediate rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
User Information L2 Protocol (see Non Transparent service).
11.8.1.3.2 Speech/Asynchronous Data, Non Transparent
BC GSM = 04 0X X2 XX 81 21 XX 6X AX (CX)
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
x |
x |
x |
x |
Length (7 or 8) depending on presence of octet 7. |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
0 |
Info. Transfer Cap.: 3,1 kHz Audio |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
0 |
0 |
Structure: SDU Integrity |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
x |
Negotiation of Intermediate Rate Requested |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: I.440 / I.450 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
1 |
Synchronous / Asynchronous: Asynchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
x |
Number of Stop Bits, Depending of the TE Configuration |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
x |
Number of Data Bits, Depending of the TE Configuration |
||||||||
x |
x |
x |
x |
User Rate |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
1 |
Intermediate Rate: 16kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
x |
x |
x |
Parity, Depending of the TE Configuration |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
1 |
Connection Element: Non transparent |
|||||||
0 |
x |
x |
x |
x |
Modem Type |
||||
Octet 7 (may not be present) |
1 |
Extension |
|||||||
1 |
0 |
Layer 2 Id. |
|||||||
0 |
1 |
x |
0 |
0 |
User Inform. layer 2 protocol, Depending of the TE Configuration |
Depending of the type of flow control supported by the TE, the coding of octet 7 is different. The value ISO 6429 (0 1000) means "Inband flow control" and the value COPnoFLCT (0 1100) means "No flow control". The "Outband Flow control is not allowed with V.21 modem).
Depending of the user rate supported by the MS, the user rate and the modem type change:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
0 |
1 |
0,3 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
0 |
1 |
Modem V.21 |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
0 |
1,2 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
0 |
Modem V.22 |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
1 |
2,4 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
1 |
Modem V.22bis |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
0 |
4,8 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
NIRR in Octet 4 |
– |
– |
– |
– |
– |
– |
0 |
– |
no meaning |
|
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
1 |
9,6 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
The following configuration is also authorized:
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
11.8.1.3.3 Speech/Synchronous Data
BC GSM = 04 07 X2 X8 81 20 1X X3 8X
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
0 |
Info. Transfer Cap.: 3,1 kHz Audio |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
1 |
1 |
Structure: Unstructured |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
0 |
Negotiation of Intermediate Rate Requested: No meaning |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: I.440 / I.450 |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
0 |
Synchronous / Asynchronous: Synchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
0 |
Number of Stop Bits: NA |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
1 |
Number of Data Bits: NA |
||||||||
x |
x |
x |
x |
User Rate |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
x |
Intermediate Rate |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
0 |
1 |
1 |
Parity: NA |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
0 |
Connection Element: Transparent |
|||||||
0 |
x |
x |
x |
x |
Modem Type |
Depending of the user rate supported by the MS, the user rate, the modem type and the intermediate rate change:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
0 |
1,2 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
0 |
Modem V.22 |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
1 |
2,4 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
0 |
1 |
1 |
Modem V.22bis |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
0 |
4,8 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
NIRR in Octet 4 |
– |
– |
– |
– |
– |
– |
0 |
– |
no meaning |
|
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
1 |
9,6 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
|
Modem type in Octet 6c: |
– |
– |
– |
0 |
0 |
1 |
1 |
0 |
Modem V.32 |
11.8.1.4 BS 81 – Speech followed by Data
The first BC in the Setup message is coded "Speech": 04 01 A0.
The repeat Indicator in the Setup message is coded “Circular for successive selection "mode 1 alternate mode 2": D1”.
The second BC in the Setup message is coded as described below.
11.8.1.4.1 Speech followed by Asynchronous Data
See subclauses 11.8.1.3.1 and 11.8.1.3.2.
11.8.1.4.2 Speech followed by Synchronous Data
See subclause 11.8.1.3.3.
11.8.1.5 TS 61 – Alternate Speech / Facsimile group 3
The first BC in the Setup message is coded "Speech": 04 01 A0.
The repeat Indicator in the Setup message is coded "Circular for successive selection (alternate)": D1.
The second BC in the Setup message is coded as described below.
11.8.1.5.1 TS 61 – Alternate Speech / Facsimile group 3, Transparent
BC GSM = 04 07 X3 X8 81 20 1X X3 80
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
1 |
Info. Transfer Cap.: FAX3 |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
1 |
1 |
Structure: Unstructured |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
0 |
Negotiation of Intermediate Rate Requested: No meaning |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: NA |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
0 |
Synchronous / Asynchronous: synchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
0 |
Number of Stop Bits: NA |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
1 |
Number of Data Bits: NA |
||||||||
x |
x |
x |
x |
User Rate |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
x |
Intermediate Rate |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
0 |
1 |
1 |
Parity: NA |
||||||
Octet 6c |
1 |
Extension |
|||||||
0 |
0 |
Connection Element: Transparent |
|||||||
0 |
0 |
0 |
0 |
0 |
Modem Type: None |
Depending of the user rate supported by the MS, the user rate and the intermediate rate change:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
1 |
2,4 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
0 |
4,8 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
0 |
– |
– |
– |
– |
– |
8 kbit/s |
NIRR in Octet 4 |
– |
– |
– |
– |
– |
– |
0 |
– |
no meaning |
|
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
1 |
9,6 kbit/s |
|
Intermediate rate in Octet 6b: |
– |
1 |
1 |
– |
– |
– |
– |
– |
16 kbit/s |
11.8.1.5.2 TS 61 – Alternate Speech / Facsimile group 3, Non-Transparent
BC GSM = 04 07 X3 XX 81 20 1X 63 X0
Octet 1 |
0 |
0 |
0 |
0 |
0 |
1 |
0 |
0 |
Information Element: Bearer Capability |
Octet 2 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
Length |
Octet 3 |
1 |
Extension |
|||||||
y |
y |
Radio Channel Requirement : Spare |
|||||||
0 |
Coding Standard: GSM |
||||||||
0 |
Transfer Mode: Circuit |
||||||||
0 |
1 |
1 |
Info. Transfer Cap.: FAX3 |
||||||
Octet 4 |
1 |
Extension |
|||||||
y |
Spare |
||||||||
0 |
0 |
Structure: SDU integrity |
|||||||
1 |
Duplex Mode: Full duplex |
||||||||
0 |
Configuration: Point to Point |
||||||||
x |
Negotiation of Intermediate Rate Requested |
||||||||
0 |
Establishment: Demand |
||||||||
Octet 5 |
1 |
Extension |
|||||||
0 |
0 |
Access Id |
|||||||
0 |
0 |
Rate Adaptation: No |
|||||||
0 |
0 |
1 |
Signalling Access Protocol: NA |
||||||
Octet 6 |
0 |
Extension |
|||||||
0 |
1 |
Layer 1 Id: Default |
|||||||
0 |
0 |
0 |
0 |
User Information Layer 1 Protocol |
|||||
0 |
Synchronous / Asynchronous: synchronous |
||||||||
Octet 6a |
0 |
Extension |
|||||||
0 |
Number of Stop Bits: NA |
||||||||
0 |
Negotiation: In band Negotiation not possible |
||||||||
1 |
Number of Data Bits: NA |
||||||||
x |
x |
x |
x |
User Rate |
|||||
Octet 6b |
0 |
Extension |
|||||||
1 |
1 |
Intermediate Rate: 16 kbit/s |
|||||||
0 |
NIC on TX: Not Required |
||||||||
0 |
NIC on RX: Not Supported |
||||||||
0 |
1 |
1 |
Parity: NA |
||||||
Octet 6c |
1 |
Extension |
|||||||
x |
x |
Connection Element |
|||||||
0 |
0 |
0 |
0 |
0 |
Modem Type: None |
Depending of the user rate supported by the MS, the MS may have the following values:
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
0 |
1 |
1 |
2,4 kbit/s |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
0 |
4,8 kbit/s |
User Rate in Octet 6a: |
– |
– |
– |
– |
0 |
1 |
0 |
1 |
9,6 kbit/s |
Depending on the support or not of both modes, Non Transparent and Transparent, the connection element field may have the following values:
Connection element in Octet 6c: |
– |
0 |
1 |
– |
– |
– |
– |
– |
Non transparent |
Connection element in Octet 6c: |
– |
1 |
x |
– |
– |
– |
– |
– |
Both T or NT preferred |
If present, Octet 7 shall have the following value:
Octet 7 |
1 |
Extension |
|||||||
1 |
0 |
Layer 2 id |
|||||||
0 |
0 |
1 |
1 |
0 |
X.25 |
11.8.1.6 TS 62 – Automatic Facsimile group 3
The repeat Indicator in the Setup message is not available.
The BC GSM is coded as described in subclause 11.8.1.5.