26.8.4 Default contents of message

3GPP51.010-1Mobile Station (MS) conformance specificationPart 1: Conformance specificationTS

ALERTING (mobile station to network direction)

No default requirements defined for this message.

ALERTING (network to mobile station direction)

Information element

Value/remark

Facility

Omitted

Progress indicator

Omitted

User-user

Omitted

ASSIGNMENT COMMAND

Information element

Value/remark

Description of the first channel

describes non-hopping Bm+ACCHs or Lm+ACCHs as appropriate for the test

Power Command

As in subclause 6.3

Frequency list

Omitted

Cell channel description

Omitted

Mode of the first channel

appropriate for the bearer capability chosen for the test

Description of the second channel

Omitted

Mode of the second channel

Omitted

Mobile allocation

Omitted

Starting time

Omitted

Cipher mode setting

Omitted

ASSIGNMENT COMPLETE

Information element

Value/remark

RR cause

not checked

AUTHENTICATION REQUEST

Information element

Value/remark

Ciphering key sequence number

Arbitrary excluding 111B

Spare half octet

(spare bits)

Authentication parameter RAND

Arbitrary

AUTHENTICATION RESPONSE

Information element

Value/remark

Authentication parameter SRES

not checked

CALL CONFIRMED

No default requirements defined for this message.

CALL PROCEEDING

Information element

Value/remark

Repeat Indicator

Omitted

Bearer Capability 1

Omitted if the SETUP message did not specify in the bearer capability 1 IE a connection element value "both, transparent preferred" or "both, non-transparent preferred". Otherwise included; in that case the connection element specifies the value that is appropriate for the selected basic service (either value "transparent" or value "non transparent (RLP)"), all other parameters are same as in the bearer capability 1 IE of the received SETUP message.

Bearer Capability 2

Omitted

Facility

Omitted

Progress indicator

Omitted

CHANNEL MODE MODIFY

Information element

Value/remark

Channel description

describes non-hopping Bm+ACCHs or Lm+ACCHs as appropriate for the test

Channel mode

appropriate for the bearer capability chosen for the test

CHANNEL MODE MODIFY ACKNOWLEDGE

Information element

Value/remark

Channel description

as sent by the SS in the corresponding CHANNEL MODE MODIFY message

Channel mode

as sent by the SS in the corresponding CHANNEL MODE MODIFY message

CHANNEL RELEASE

Information element

Value/remark

RR cause

Normal event

CHANNEL REQUEST

Information element

Value/remark

Establishment cause

If in response to paging, then "100"; if a mobile originating call, then "111"

Random reference

Arbitrary value of 5 bits length

CIPHERING MODE COMMAND

Information element

Value/remark

Cipher mode setting

algorithm identifier

indicates a supported algorithm

SC

Start ciphering

Cipher response

CR

IMEI must not be included

CIPHERING MODE COMPLETE

No default requirements defined for this message.

CM SERVICE ACCEPT

No default values defined for this message.

CM SERVICE REJECT

Information element

Value/remark

Reject cause

Service or option not available, unspecified

CM SERVICE REQUEST

No default requirements defined for this message.

CONNECT (network to mobile station direction)

Information element

Value/remark

Facility

Omitted

Progress indicator

Omitted

Connected number

Omitted

Connected subaddress

Omitted

User-user

Omitted

CONNECT (mobile station to network direction)

No default requirements defined for this message.

CONNECT ACKNOWLEDGE

No default requirements defined for this message.

DISCONNECT (network to mobile station direction)

Information element

Value/remark

Cause

Coding standard

GSM

Location

User

Cause value

Normal clearing

Facility

Omitted

Progress indicator

Omitted

User-user

Omitted

DISCONNECT (mobile station to network direction)

Information element

Value/remark

Cause

Shall be present, contents not checked

Facility

Omitted

User-user

Omitted

SS version

Omitted

HANDOVER ACCESS

No default requirements defined for this message.

HANDOVER COMMAND

Information element

Value/remark

Cell Description

a BCCH frequency, which is one of the neighbour cells

Description of the first channel

describes non-hopping Bm+ACCHs or Lm+ACCHs as appropriate for the test

Handover Reference

an arbitrary value

Power Command

as in 6.3

Synchronization indication

Omitted

Frequency short list

Omitted

Frequency List

Omitted

Cell Channel Description

Omitted

Channel Mode

Omitted

Channel Description

Omitted

Channel Mode 2

Omitted

Frequency Channel Sequence

Omitted

Mobile Allocation

Omitted

Starting Time

Omitted

Real time difference

Omitted

Timing advance

Omitted

Cipher Mode setting

Omitted

HANDOVER FAILURE

No default requirements defined for this message.

IMMEDIATE ASSIGNMENT

Information element

Value/remark

Page mode

Normal paging

Channel description

describes a valid SDCCH+SACCH in non-hopping mode

Request reference

Random access information

As received from MS

T1′, T2, T3

Corresponding to frame number of the CHANNEL REQUEST

Timing advance

corresponding the timing difference between the MS and the SS

Mobile allocation

Empty (L=0)

Starting time

Omitted

MODIFY

No default values defined for this message.

MODIFY COMPLETE

No default requirements defined for this message.

MODIFY REJECT

No default values defined for this message.

NOTIFY (network to mobile station direction)

Information element

Value/remark

Notification indicator

one of the valid values chosen arbitrarily

PAGING REQUEST TYPE 1

Information element

Value/remark

L2 pseudo length

L2 pseudo length of the message

Page Mode

Normal Paging

Channels needed for Mobiles 1 and 2

channel (first)

any channel

channel (second)

any channel

Mobile identity 1

TMSI of MS under test

Mobile identity 2

Omitted

P1 rest octets

(spare octets)

PAGING RESPONSE

No default requirements defined for this message.

PROGRESS

No default values defined for this message.

RELEASE (network to mobile station direction)

Information element

Value/remark

Cause

Omitted

Second cause

Omitted

Facility

Omitted

User-user

Omitted

RELEASE (mobile station to network direction)

No default requirements defined for this message.

RELEASE COMPLETE (network to mobile station direction)

Information element

Value/remark

Cause

Omitted

Facility

Omitted

User-user

Omitted

RELEASE COMPLETE (mobile station to network direction)

No default requirements defined for this message.

SETUP (mobile station to network direction)

Information element

Value/remark

BC Repeat indicator

Omitted

Bearer capability 1

Appropriate for the basic service selected for the test

Bearer capability 2

Omitted

Facility

Omitted

Calling party subaddress

Omitted

Called party BCD number

As entered

Called party subaddress

Omitted

LLC repeat indicator

Omitted

Low layer compatibility I

Appropriate for the basic service selected for the test

Low layer compatibility II

Omitted

HLC repeat indicator

Omitted

High layer compatibility i

Appropriate for the basic service selected for the test

High layer compatibility ii

Omitted

User-user

Omitted

SS version

Omitted

CLIR suppression

Omitted

CC Capabilities

present, shall indicate support for DTMF as per subclause 5.5.7 of 3GPP TS 04.08 / 3GPP TS 24.008

SETUP (network to mobile station direction)

Information element

Value/remark

BC repeat indicator

Omitted

Bearer capability 1

Appropriate for the basic service selected for the test

Bearer capability 2

Omitted

Facility

Omitted

Progress indicator

Omitted

Signal

Any defined value as described for Signal IE in 3GPP TS 04.08 / 3GPP TS 24.008

Calling party BCD number

Omitted

Calling party subaddress

Omitted

Called party BCD number

Omitted

Called party subaddress

Omitted

LLC repeat indicator

Omitted

Low layer compatibility I

Appropriate for the basic service selected for the test

Low layer compatibility II

Omitted

HLC repeat indicator

Omitted

High layer compatibility i

Appropriate for the basic service selected for the test

High layer compatibility ii

Omitted

User-user

Omitted

START DTMF

No default requirements defined for this message.

START DTMF ACKNOWLEDGE

Information element

Value/remark

Keypad facility

corresponding to the DTMF digit indicated in the START DTMF message

START DTMF REJECT

Information element

Value/remark

Cause

value "Resources unavailable, unspecified"

STATUS

Information element

Value/remark

Cause

Value "Response to STATUS ENQUIRY"

Call state

Specified separately in each test case

Auxiliary states

Omitted

STATUS ENQUIRY

No default values defined for this message, except that when this message is used to check that "all the transaction identifiers from 000 to 110" are in the null state, the TI flag shall take the value "1" in mobile originating call tests and shall take the value "0" in mobile terminating call tests.

STOP DTMF

No default requirements defined for this message.

STOP DTMF ACKNOWLEDGE

No default values defined for this message.

Unknown Message

Protocol Discriminator

Call Control; Call Related SS

Transaction Identifier

same as in use in the test

Message Type

0000 0100