70.14.7 – TechSpec

Skip to content

TechSpec

Foreword
1 Scope
2 References
3 Definitions, conventions and applicability
4 Test Equipment
5 Testing methodology in general (layers 1, 2, and 3)
6 Reference test methods
7 Implicit testing
8 Measurement uncertainty
9 Format of tests
10 Generic call set up procedures
11 General tests
12 Transceiver
13 Transmitter
14 Receiver
15 Timing advance and absolute delay
16 Reception time tracking speed
17 Access times during handover
18 Temporary reception gaps
19 Channel release after unrecoverable errors
20 Cell selection and reselection
21 Received signal measurements
22 Transmit power control timing and confirmation
23 Single frequency reference
24 Tests of the layer 1 signalling functions
25 Tests of the layer 2 signalling functions
26 Testing of layer 3 functions
27 Testing of the SIM/ME interface
28 Test of autocalling restrictions
29 Testing of bearer services
30 Speech teleservices
31 Test of supplementary services
32 Testing of speech transcoding functions
33 Mobile station features
34 Short message service (SMS)
35 Low battery voltage detection
36 Individual equipment type requirements and interworking - special conformance testing functions
37 to 39 Void
40 GPRS default conditions, message contents and macros
41 GPRS Paging, TBF establishment/release and DCCH related procedures
42 Test of Medium Access Control (MAC) protocol
43 RLC Test Cases
44 Test case requirements for GPRS mobility management
- 44.1 Default conditions and default messages
- 44.2 Elementary procedures of GPRS mobility management
45 Session Management Procedures
46 LLC and SNDCP Tests
47 Dual Transfer Mode
48 to 49 Void
50 EGPRS Default Conditions, Message Contents and Macros
51 EGPRS Paging, TBF establishment/release and DCCH related procedures
52 EGPRS Test of Medium Access Control (MAC) protocol
53 Test of EGPRS Radio Link Control (RLC) Protocol
54 to 56 Void
57 EGPRS Dual Transfer Mode
58 Void
58a Latency reductions
58b Downlink Dual Carrier and Downlink Multi Carrier
58c EGPRS2
58d EFTA
58e DTR
59 Void
60 Inter-system hard handover from GSM to UTRAN
61-69 Void
70 Location Services
80 Generic Access default conditions, message contents and macros
81 GAN Discovery and Registration Procedures
82 GAN CS Domain Procedures
83 GAN PS Domain Procedures
84 GAN Iu Mode Procedures
90 Text Telephony (TTY) Services
A1.1 General Conditions (GC)
A1.2 Normal and extreme Test Conditions (TC)
A3.1 Protocol Implementation Conformance Statement (PICS)
A3.2 Protocol Implementation Extra Information for Testing (PIXIT)
A4.1 Introduction
A4.2 Default Parameters for the test SIM
A4.3 Default settings for the Elementary Files (EFs)
A5.1 Introduction
A5.2 Standard test signals
A5.3 SS functional requirements
A5.4 SIM simulator functional requirements
A6.1 Recommended Timing Accuracy Test Environment (Unassisted)
A6.2 Recommended Timing Accuracy Test Environment (Assisted)
A7.1 Statistical testing of receiver performance
A7.2 Statistical testing of 2 D position error and TTFF for A-GPS and A-GNSS Minimum Performance test cases
A9.1 Files relating to GAN certificate for testing
A10.1 Details on Repeated SACCH Testing
- A10.1 Details on Repeated SACCH Testing

70.14.7

3GPP51.010-1Mobile Station (MS) conformance specificationPart 1: Conformance specificationTS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM