26.7.0 Default contents of messages
3GPP51.010-1Mobile Station (MS) conformance specificationPart 1: Conformance specificationTS
Default contents SYSTEM INFORMATION messages and default settings
For cell A and B
For GSM use 26.6.14. For DCS use 26.6.15, for PCS 1 900 use 26.6.18, for GSM 450 use 26.6.16, for GSM 480 use 26.6.17, for GSM 750 use 26.6.19, for GSM 850 use 26.6.20, for GSM 710 use 26.6.21 and for T-GSM 810 use 26.6.22.
Cell C
The contents of SYSTEM INFORMATION TYPE 1 to 6 messages for cell C are identical to those of cell A with the following exceptions:
|
Cell Channel Description |
|
|
– Format Identifier |
Range 128 for GSM 450, GSM 480, GSM 710, GSM 750, T-GSM 810 and GSM 850. Bit map 0 for GSM. Range 512 for DCS and PCS 1 900. |
|
– Cell Allocation ARFCN |
Channel number 267 for GSM 450, Channel number 315 for GSM 480, Channel Number 30 for GSM, Channel Number 700 for DCS, PCS 1 900, Channel Number 467 for GSM 710, GSM 750 and T-GSM 810 and Channel Number 157 for GSM 850. |
|
Cell Identity |
|
|
– Cell Identity Value |
0003H |
Default settings for cell C:
|
Downlink input level |
53 dBmicroVolt emf |
|
Uplink output power |
minimum supported by the MS’s power class for GSM and DCS, Power Control Level = 10 for PCS 1 900 |
|
Propagation profile |
static. |
|
BCCH/CCCH carrier number |
267 for GSM 450, 315 for GSM 480, 30 for GSM, 700 for DCS and PCS 1 900, 467 for GSM 710, GSM 750 and T-GSM 810 and 157 for GSM 850. |
ABORT
|
Information element |
Value/remark |
|
Reject cause |
Depending on the test one of either: #6 – Illegal ME #17 – Network Failure. |
AUTHENTICATION REQUEST
|
Information element |
Value/remark |
|
Cipher Key Sequence Number |
Arbitrary |
|
Authentication parameter RAND |
Arbitrarily chosen by the test house |
AUTHENTICATION RESPONSE
|
Information element |
Value/remark |
|
Authentication parameter SRES |
As applicable |
AUTHENTICATION REJECT
|
Information element |
Value/remark |
|
None but message head |
CHANNEL RELEASE
|
Information element |
Value/remark |
|
RR cause |
Normal release |
CIPHERING MODE COMMAND
|
Information element |
Value/remark |
|
Cipher mode setting |
Start ciphering |
|
Cipher Response |
IMEI must not be included |
CM RE-ESTABLISHMENT REQUEST
|
Information element |
Value/remark |
|
Cipher Key Sequence Number |
According to SIM contents |
|
Mobile station classmark 2 |
See PICS/PIXIT |
|
Mobile Identity |
IMSI of MS under test |
|
Location area identification |
As in subclause 26.1.1 |
CM SERVICE ACCEPT
|
Information element |
Value/remark |
|
None but message head |
Omitted |
CM SERVICE REQUEST
|
Information element |
Value/remark |
|
CM service type |
Mobile originating call establishment unless otherwise specified in test. |
|
Ciphering key sequence number |
According to SIM contents |
|
Mobile station classmark 2 |
See PICS/PIXIT |
|
Mobile identity |
TMSI of the MS under test |
CM SERVICE REJECT
|
Information element |
Value/remark |
|
Reject cause |
Depending on test |
IDENTITY REQUEST
|
Information element |
Value/remark |
|
Identity type |
Depending on test |
|
Spare half octet |
0000 |
IDENTITY RESPONSE
|
Information element |
Value/remark |
|
Mobile identity |
Depending on test |
IMMEDIATE ASSIGNMENT
|
Information element |
Value/remark |
|
L2 pseudo length |
|
|
Page mode |
Normal Paging |
|
Spare half octet |
0000 |
|
Channel description |
|
|
– Channel type and TDMA offset |
SDCCH/4 or SDCCH/8 |
|
– Time slot number |
Arbitrary legal value |
|
– Subsequent fields of the Channel description IE depend upon the Type of MS under test, as specified in subclause 26.1.1 |
|
|
Request reference |
|
|
– Random access information |
As received from MS |
|
– N51,N32,N26 |
Corresponding to the frame in which the Channel Request was sent |
|
Timing advance |
0 |
|
Mobile allocation |
Empty (L=0) |
|
Starting time |
Omitted |
|
IA rest octets |
all bits set to spare |
IMSI DETACH INDICATION
|
Information element |
Value/remark |
|
Mobile station classmark 1 |
See PICS/PIXIT |
|
Mobile identity |
TMSI of the MS under test |
LOCATION UPDATING ACCEPT
|
Information element |
Value/remark |
|
Location area identification |
As in subclause 26.1.1 |
|
Mobile identity |
Omitted |
|
Follow on proceed |
Omitted |
LOCATION UPDATING REJECT
|
Information element |
Value/remark |
|
Reject cause |
As specified in test |
LOCATION UPDATING REQUEST
|
Information element |
Value/remark |
|
Location updating type |
Normal location updating |
|
Cipher Key Sequence Number |
According to SIM contents |
|
Location area identification |
As in subclause 26.1.1 |
|
Mobile station classmark |
See PICS/PIXIT |
|
Mobile identity |
TMSI of the MS |
PAGING REQUEST TYPE 1
|
Information element |
Value/remark |
|
L2 pseudo length |
|
|
Page Mode |
Normal paging |
|
Channels needed |
|
|
– mobile 1 |
"any channel" |
|
– mobile 2 |
spare |
|
Mobile identity 1 |
TMSI of MS under test |
|
Mobile identity 2 |
Omitted |
|
P1 rest octets |
All bits set to spare |
PAGING RESPONSE
|
Information element |
Value/remark |
|
Ciphering key sequence number |
According to SIM contents |
|
Spare half octet |
0000 |
|
Mobile station classmark 2 |
See PICS/PIXIT |
|
Mobile identity |
TMSI of the MS under test |
TMSI REALLOCATION COMMAND
|
Information element |
Value/remark |
|
Location area identification |
As in subclause 26.1.1 |
|
Mobile identity |
TMSI of the MS under test |
TMSI REALLOCATION COMPLETE
|
Information element |
Value/remark |
|
None but message head |
omitted |