8.9 Indicator control +CIND

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Table 69: +CIND parameter command syntax

Command	Possible response(s)
+CIND=[<ind>[,<ind>[,…]]]	+CME ERROR: <err>
+CIND?	+CIND: <ind>[,<ind>[,…]] +CME ERROR: <err>
+CIND=?	+CIND: (<descr>,(list of supported <ind>s))[,(<descr>,(list of supported <ind>s))[,…]] +CME ERROR: <err>

Description

Set command is used to set the values of MT indicators. <ind> value 0 means that the indicator is off (or in state which can be identified as "off"‑state), 1 means that indicator is on (or in a state which is more substantial than "off"‑state), 2 is more substantial than 1, and so on. If the indicator is a simple on/off style element, it has values 0 and 1. The number of elements is MT specific. If MT does not allow setting of indicators or MT is not currently reachable, +CME ERROR: <err> is returned. Refer clause 9.2 for possible <err> values. If certain indicator is not writable, setting of it should be ignored. If parameter is empty field, indicator shall remain in the previous value.

Read command returns the status of MT indicators. If MT is not currently reachable, +CME ERROR: <err> is returned. Refer clause 9.2 for possible <err> values.

Test command returns pairs, where string value <descr> is a maximum 16 character description of the indicator and compound value is the allowed values for the indicator. If MT is not currently reachable, +CME ERROR: <err> is returned. Refer clause 9.2 for possible <err> values.

NOTE: MT manufacturer should offer the description of supported indicators not listed here and their value ranges and default values.

Defined values

<ind>: integer type value, which shall be in range of corresponding <descr>

<descr> values reserved by the present document and their <ind> ranges:

"battchg" battery charge level (0‑5)

"signal" signal quality (0‑5)

"service" service availability (0‑1)

"sounder" sounder activity (0‑1)

"message" message received (0‑1)

"call" call in progress (0‑1)

"vox" transmit activated by voice activity (0‑1)

"roam" roaming indicator (0‑1)

"smsfull" a short message memory storage in the MT has become full and a short message has been rejected (2), has become full (1), or memory locations are available (0); i.e. the range is (0‑2)

"inputstatus" keypad/touch screen status (0-1)

Implementation

Optional.