10.1.83 5G ProSe UE-to-network Relay Authentication Response +C5GPU2NRAUTHR

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Table 10.1.83-1: +C5GPU2NRAUTHR action command syntax


Possible response(s)


+CME ERROR: <err>



Execution command allows the UE to send the EAP-response message to the EAP-request made by network for a particular 5G ProSe remote UE. The EAP-request message is received through the unsolicited result code +C5GPU2NRAUTH. The response to the execution command only indicates if the EAP-response message has been successfully sent to lower layers or not.

NOTE: Calculating the EAP response for the request received can be implementation specific.

Defined values

<rmid>: integer type, identifies a particular 5G ProSe remote UE. The <rmid> parameter is a local to the TE-MT interface.

<len>: integer type, indicates the length of the EAP message content. It can be of max 1503 according to 3GPP TS 24.501 [161] clause

<eap_msg>: string type in hexadecimal format, consists of the EAP message from 5G ProSe remote UE as defined in IETF RFC 3748 , IETF RFC 4187  and IETF RFC 5448. This parameter shall not be subject to conventional character conversion as per +CSCS.