10.1.37 UE’s mobility management IMS voice termination +CMMIVT
27.0073GPPAT command set for User Equipment (UE)Release 18TS
Table 10.1.QT3-1: +CMMIVT parameter command syntax
Command |
Possible Response(s) |
+CMMIVT=[<setting>] |
|
+CMMIVT? |
+CMMIVT: <setting> |
+CMMIVT=? |
+CMMIVT: (list of supported <setting>s) |
Description
The set command is used to set the MT to perfom additional procedures as specified in 3GPP TS 24.008 [8] and 3GPP TS 24.301 [83] to support terminating access domain selection by the network.
The read command returns the setting, independent of the current serving cell capability and independent of the current serving cell’s access technology.
Test command returns supported values as a compound value.
Defined values
<setting>: integer type; indicates the mobility management IMS voice termination preference of the UE. The default value is manufacturer specific.
1 Mobility Management for IMS Voice Termination disabled
2 Mobility Management for IMS Voice Termination enabled
NOTE: The definition of the UE’s mobility management IMS voice termination values can be found in 3GPP TS 24.167 [102], clause 5.31.
Implementation
Optional.
This command is only applicable to UEs in GERAN, UTRAN and E-UTRAN.