10.1.86 5GS network register or deregister over non-3GPP access +C5GRDN3GPP

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Table 10.1.86-1: +C5GRDN3GPP parameter command syntax

Command

Possible Response(s)

+C5GRDN3GPP=<state>

+CME ERROR: <err>

+C5GRDN3GPP?

+C5GRDN3GPP: <state>

+C5GRDN3GPP=?

+C5GRDN3GPP: (list of supported <state>s)

Description

The execution command is used to register the MT to, or deregister the MT from, 5GS network over non-3GPP access. If the MT is already in the requested state, the command is ignored and the OK response is returned. If the requested state cannot be achieved, an ERROR or +CME ERROR response is returned. Extended error responses are enabled by the +CMEE command. Refer clause 9.2 for possible <err> values.

Any active PDP contexts will be automatically deactivated when the registration state changes to deregistered.

The read command returns the current 5GS registration state over non-3GPP access.

The test command is used for requesting information on the supported 5GS registration states over non-3GPP access.

Defined values

<state>: integer type; indicates the state of 5GS registration over non-3GPP access

0 deregistered

1 registered

Implementation

Optional.