10.1.40 WLAN offload cell measurement +CWLANOLCM
27.0073GPPAT command set for User Equipment (UE)Release 18TS
Table 10.1.40-1: +CWLANOLCM parameter command syntax
Command |
Possible response(s) |
+CWLANOLCM=[<n>] |
+CME ERROR: <err> |
+CWLANOLCM? |
+CWLANOLCM: <n>,<rscp>,<ecno>,<rsrp>,<rsrq>
|
+CWLANOLCM=? |
+CWLANOLCM: (list of supported <n>s),(list of supported <rscp>s),(list of supported <ecno>s),(list of supported <rsrp>s),(list of supported <rsrq>s) |
Description
Set command enables or disables the indication for WLAN offloading based on the thresholds for cell measurement parameters. If reporting is enabled by <n>=1, the MT returns the following unsolicited result code from MT to TE whenever the cell measurement parameters meet the criteria for WLAN offloading based on configured thresholds:
+CWLANOLCMI: <rscp>,<ecno>,<rsrp>,<rsrq>
If a setting is not supported by the MT, +CME ERROR: <err> is returned. Refer clause 9.2 for possible <err> values.
Read command returns the current status of result code presentation and the measurements from the current primary serving cell at the MT.
Test command returns the values supported by MT as compound values.
Defined values
<n>: integer type
0 disable WLAN offload cell measurement unsolicited result code
1 enable WLAN offload cell measurement unsolicited result code +CWLANOLCMI
<rscp>: integer type; indicates the received signal code power. Refer parameter <rscp> in clause 8.69.
<ecno>: integer type; indicates the ratio of the received energy per PN chip to the total received power spectral density. Refer parameter <ecno> in clause 8.69.
<rsrp>: integer type; indicates the reference signal received power. Refer parameter <rsrp> in clause 8.69.
<rsrq>: integer type; indicates the reference signal received quality. Refer parameter <rsrq> in clause 8.69.
Implementation
Optional.