8.39 Postpone or dismiss an alarm +CAPD

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Table 99: +CAPD action command syntax

Command	Possible response(s)
+CAPD[=<sec>]	+CME ERROR: <err>
+CAPD=?	+CAPD: (list of supported <sec>s) +CME ERROR: <err>
NOTE: The syntax of the AT Set Command is corrected to be according to ITU‑T Recommendation V.250 [14]. Older versions of the specification specify incorrect syntax +CAPD=[<sec>].

Description

Set command postpones or dismisses a currently active alarm. If the command fails in an MT error, +CME ERROR: <err> is returned. Refer clause 9.2 for possible <err> values.

Test command returns supported <sec>-parameter values as a compound value.

Defined values

<sec>: integer type value indicating the number of seconds to postpone the alarm. If <sec> is set to 0 (default), the alarm is dismissed.

Implementation

Optional.