10.1.84 ECS Configuration information +CECSADDRCONF

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Table 10.1.84-1: +CECSADDRCONF parameter command syntax


Possible response(s)


+CME ERROR: <err>


+CECSCONF: <n>,<ECSConf_info_length>,<ECSConf_info>


+CECSCONF: (list of supported <n>s)


The set command controls the presentation of ECS Configuration information to the TE by an unsolicited result code +CECSCONFU: <ECSConf_info_length>,<ECSConf_info> when there is a change in the ECS Configuration information stored at the MT. For each ECS, the ECS Configuration information consists of an ECS FQDN, ECS IP Address, ECSP ID, and/or Spatial Validity Conditions, as specified in 3GPP TS 23.558 [187], clause 8.3.2. If <ECSConf_info_length> has a value of zero or is omitted, and <ECSConf_info> consists of an empty string, no ECS Configuartion information is stored on the MT.

Read command returns <n> which indicates whether requesting ECS Configuration information is enabled or disabled. The read command also returns the current values of <ECSConf_info_length> and <ECSConf_info> if available.

Test command returns values supported as a compound value.

Defined values

<n>: integer type.

0 disable unsolicited result code +CECSCONFU: <ECSConf_info_length>,<ECSConf_info>

1 enable unsolicited result code +CECSCONFU: <ECSConf_info_length>,<ECSConf_info>

<ECSConf_info_length>: integer type; indicates the number of octets of the <ECSConf_info> information element.

If the value is zero or is omitted, no ECS Configuration information is stored on the MT.

<ECSConf_info>: string type in hexadecimal format; indicates the ECS Configuration Information for one or more ECSs, where each ECS Configuration Information consists of an ECS address, spatial validity conditions, and an ECS provider identifier. The <ECSConf_info> is encoded as the value part of the ECS information information element in 3GPP TS 24.501 [161], clause, followed by the ECSP ID encoded as a UTF-8 string as described in 3GPP TS 24.008 [8]. This parameter shall not be subject to conventional character conversion as per +CSCS.

If the value is an empty string (""), no ECS Configuration information is stored on the MT.