8.84 Application level measurement configuration for NR +CAPPLEVMCNR

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Table 8.84-1: +CAPPLEVMCNR parameter command syntax

Command

Possible response(s)

+CAPPLEVMCNR=[<n>]

+CME ERROR: <err>

+CAPPLEVMCNR?

+CAPPLEVMCNR: <n>

+CAPPLEVMCNR=?

+CAPPLEVMCNR: (list of supported <n>s)

Description

This command allows control of the application level measurement configuration according to 3GPP TS 38.331 [160]. The set command controls the presentation of the unsolicited result code +CAPPLEVMCNR: (list of [<CR><LF>,<meas_config_app_layer_id>,[<start-stop_measurement>,[<ran_visible_release_only>]],[<app-meas_config_file_length>,<app-meas_config-file>],[<transmission_of_session_start-end>],[<ran_visible_periodicity>],[<number_of_buffer_level_entries>],[<report_playout_delay_for_media_startup>],[<app-meas_service_type>]]s) providing data for the configuration. Refer clause 9.2 for possible <err> values.

Read command returns the current value of <n>.

Test command returns values supported as a compound value.

Defined values

<n>: integer type. Disable and enable presentation of the unsolicited result code +CAPPLEVMCNR to the TE.

0 Disable presentation of the unsolicited result code

1 Enable presentation of the unsolicited result code

<app-meas_service_type>: integer type. Contains the indication of what application that is target for the application level measurement configuration.

1 QoE measurement collection for streaming services

2 QoE measurement collection for MTSI services

3 QoE measurement collection for VR services

<start-stop_measurement>: integer type. Indicates the start and stop of the application level measurement reporting for the application indicated by the <app-meas_service_type>.

0 start the application level measurement

1 stop the application level measurement and release the application level measurement configuration

<app-meas_config_file_length>: integer type. Indicates the number of octets of the <app-meas_config-file> parameter.

<app-meas_config-file>: string of octets. Contains the application level measurement configuration file for the application indicated by the <app-meas_service_type>. The parameter shall not be subject to conventional character conversion as per +CSCS.

<meas_config_app_layer_id>: integer type. At QoE measurement configuration the <meas_config_app_layer_id> indicates an identity for the QoE measurement configuration received in the <app-meas_config-file>. At QoE measurement configuration release, the <meas_config_app_layer_id> indicates the measurement to be released. The absence of this parameter indicates that all measurement configurations are released.

<transmission_of_session_start-end>: integer type. Contains an indication of whether session start-end is required.

0 Not required

1 Required

<ran_visible_periodicity>: integer type.

0 120 ms

1 240 ms

2 480 ms

3 640 ms

4 1024 ms

<number_of_buffer_level_entries>: integer type. Contains the number of buffer level entries.

1-8

<report_playout_delay_for_media_startup>: integer type. Contains an indication of whether report of initial playout for media startup delay is required.

0 Report of playout delay for media startup is not required

1 Report of playout delay for media startup is required

<ran_visible_release_only>: integer type. Indicates the RAN visible application level measurements to be released.

0 Release the RAN visible application level measurements for this <meas_config_app_layer_id>

Implementation

Optional.