8.80 Consent for requesting access to restricted local operator services +CCRLOS

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Table 8.80-1: +CCRLOS parameter command syntax

Command	Possible response(s)
+CCRLOS=[<RLOS_cons>]
+CCRLOS?	+CCRLOS: <RLOS_cons>
+CCRLOS=?	+CCRLOS: (list of supported <RLOS_cons>s)

Description

The set command allows the TE to indicate to the MT whether the user consents to requesting access to RLOS. The configuration of whether the user consents to requesting access to RLOS is kept by the MT until a new set command is received from the TE, i.e. it is not cleared upon the completion of an attach procedure for access to RLOS.

The read command returns the current settings for the user’s consent for requesting access to RLOS.

The test command returns values supported as a compound value.

Defined values

<RLOS_cons>: integer type. Indicates the user’s consent for requesting access to RLOS.

0 user does not consent to requesting access to RLOS.

1 user consents to requesting access to RLOS.

Implementation

Optional. This command is only applicable to UEs in E-UTRAN.