8.78 Application level measurement configuration +CAPPLEVMC

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Table 8.78-1: +CAPPLEVMC parameter command syntax

Command	Possible response(s)
+CAPPLEVMC=[<n>]	+CME ERROR: <err>
+CAPPLEVMC?	+CAPPLEVMC: <n>
+CAPPLEVMC=?	+CAPPLEVMC: (list of supported <n>s)

Description

This command allows control of the application level measurement configuration according to 3GPP TS 25.331 [74] and 3GPP TS 36.331 [86]. The set command controls the presentation of the unsolicited result code +CAPPLEVMC: <app-meas_service_type>,<start-stop_reporting>[,<app-meas_config_file_length>,<app-meas_config-file>] providing data for the configuration. Refer clause 9.2 for possible <err> values.

Read command returns the current value of <n>.

Test command returns values supported as a compound value.

Defined values

<n>: integer type. Disable and enable presentation of the unsolicited result code +CAPPLEVMC to the TE.

0 Disable presentation of the unsolicited result code

1 Enable presentation of the unsolicited result code

<app-meas_service_type>: integer type. Contains the indication of what application that is target for the application level measurement configuration.

1 QoE measurement collection for streaming services

2 QoE measurement collection for MTSI services

<start-stop_reporting>: integer type. Indicates the start and stop of the application level measurement reporting for the application indicated by the <app-meas_service_type>.

0 start the application level measurement reporting

1 stop the application level measurement reporting

<app-meas_config_file_length>: integer type. Indicates the number of octets of the <app-meas_config-file> parameter.

<app-meas_config-file>: string of octets. Contains the application level measurement configuration file for the application indicated by the <app-meas_service_type>. The parameter shall not be subject to conventional character conversion as per +CSCS.

Implementation

Optional.