10.1.78 Paging restrictions +CPAGRES

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Table 10.1.78-1: +CPAGRES parameter command syntax

Command	Possible response(s)
+CPAGRES=<n>[,<paging_restrictions>[,<number_of_restricted_cid>[,<cid>[,<cid>[,<cid>[,<cid>[,…]]]]]]]	+CME ERROR: <err>
+CPAGRES?	+CPAGRES: <n>,<paging_restrictions>[, <number_of_restricted_cid>[,<cid>[,<cid>[,<cid>[,<cid>[,…]]]]]]
+CPAGRES=?	+CPAGRES: (list of supported <n>s),(list of supported <paging_restrictions>s), (list of supported <number_of_restricted_cid>s),(list of supported <cid>s)

Description

The set command controls the presentation of unsolicited result code +CPAGRES: <paging_restrict_result> when <n>=1 reporting that the paging restriction preferences specified by the MUSIM capable UE have been accepted by the network or not. When <n>=2, a special form of the set command enables the MUSIM capable UE to specify the paging restriction preferences to the network for 3GPP access in EPS (see 3GPP TS 24.301 [83], clause 5.5.3.2 and clause 5.6.1) and 5GS (see 3GPP TS 24.501 [161], clause 5.5.1 and clause 5.6.1). The paging restriction preferences can be set or removed.

Refer clause 9.2 for possible <err> values.

The read command returns the current settings of <n> and paging restrictions.

The test command returns values supported as a compound value.

Defined values

<n>: integer type

0 Disable presentation of unsolicited result code +CPAGRES: <paging_restrict_result>

1 Enable presentation of unsolicited result code +CPAGRES: <paging_restrict_result>

2 Reject paging request from the network. There will be no change in the current setting of <n>, enabling or disabling of unsolicited result code +CPAGRES: <paging_restrict_result>

<paging_restrict_result>: integer type; indicates whether the requested paging restriction preferences of the UE are accepted or not, see 3GPP TS 24.301 [83], clause 9.9.3.66.

0 indicates that paging restriction is rejected

1 indicates that paging restriction is accepted

<paging_restrictions>: integer type; indicates the paging restriction preferences of the UE, see 3GPP TS 24.301 [83], clause 9.9.3.66, and 3GPP TS 24.501 [161], clause 9.11.3.77.

0 indicates that paging is not restricted

1 indicates that all paging is restricted

2 indicates that all paging is restricted except for voice service

3 indicates that all paging is restricted except for specified PDN connection(s) in EPS or PDU session(s) in 5GS

4 indicates that all paging is restricted except for voice service and specified PDN connection(s) in EPS or PDU session(s) in 5GS

<number_of_restricted_cid>: integer type; indicates the number of <cid>s for which paging is restricted

<cid>: integer type; A numeric parameter which specifies a particular EPS bearer context or a 5GS QoS flow. The <cid> parameter is local to the TE-MT interface and identifies only EPS bearer contexts or 5GS QoS flows which have been setup via AT command (see the +CGDCONT and +CGDSCONT commands).

Implementation

Optional.