10.1.77 Reject paging +CREJPAG

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Table 10.1.77-1: +CREJPAG parameter command syntax

Command	Possible response(s)
+CREJPAG=[<n>[,<rejpage_pgcause_unknown>[,<rejpage_pgcause_not_voice>[,<rejpage_pgcause_voice>]]]]	+CME ERROR: <err> when <n>=2 and command successful +CREJPAG: <rejpage_pgcause_unknown>,<rejpage_pgcause_not_voice>,<rejpage_pgcause_voice>
+CREJPAG?	+CREJPAG: <n>,<rejpage_pgcause_unknown>,<rejpage_pgcause_not_voice>,<rejpage_pgcause_voice>
+CREJPAG=?	+CREJPAG: (list of supported <n>s),(list of supported <rejpage_pgcause_unknown>s),(list of supported <rejpage_pgcause_not_voice>s),(list of supported <rejpage_pgcause_voice>s)

Description

The set command controls the presentation of unsolicited result code +CREJPAG: <paging_cause> when <n>=1 reporting the paging cause indication for which the MUSIM capable UE has received a page. The following cases are applicable in EPS (see 3GPP TS 24.301 [83], clause 5.5.1) and 5GS (see 3GPP TS 24.501 [161], clause 5.5.1).

a) UE receives page from a network that does not support paging cause indication for voice services; or

b) UE receives page from a network that supports paging cause indication for voice services and page is not related to voice service; or

c) UE receives page from a network that supports paging cause indication for voice services and page is related to voice service.

When <n>=2, a special form of the set command +CREJPAG: <rejpage_pgcause_unknown>,<rejpage_pgcause_not_voice>,<rejpage_pgcause_voice> enables the MUSIM capable UE to reject the paging request from the network in EPS (see 3GPP TS 24.301 [83], clause 5.6.1), and 5GS (see 3GPP TS 24.501 [161], clause 5.6.1). The TE sends this command (when <n>=2) to the MT in anticipation of MT receiving indication of paging from the network.

The read command returns the current settings of <n> and indicates whether currently the paging request received from the network is set to be rejected or not for the different cases described above.

Refer clause 9.2 for possible <err> values.

The test command returns values of supported <n>s.

Defined values

<n>: integer type

0 Disable presentation of unsolicited result code +CREJPAG: <paging_cause>

1 Enable presentation of unsolicited result code +CREJPAG: <paging_cause>

2 Reject paging request from the network. There will be no change in the current setting of <n>, enabling or disabling of unsolicited result code +CREJPAG: <paging_cause>

<paging_cause>: integer type; indicates the paging cause.

0 Page is received from a network that does not support paging cause indication for voice services

1 Page is received from a network that supports paging cause indication for voice services and page is not related to voice service

2 Page is received from a network that supports paging cause indication for voice services and page is related to voice service

<rejpage_pgcause_unknown>: integer type; indicates whether the paging request is set to be rejected when the UE receives page from a network that does not support paging cause indication for voice services.

0 Paging request is not set to be rejected

1 Paging request is set to be rejected

<rejpage_pgcause_not_voice>: integer type; indicates whether the paging request is set to be rejected when the UE receives page from a network that supports paging cause indication for voice services and page is not related to voice service.

0 Paging request is not set to be rejected

1 Paging request is set to be rejected

<rejpage_pgcause_voice>: integer type; indicates whether the paging request is set to be rejected when the UE receives page from a network that supports paging cause indication for voice services and page is related to voice service.

0 Paging request is not set to be rejected

1 Paging request is set to be rejected

Implementation

Optional.