10.1.70 5GS ATSSS Rules read dynamic parameters +C5GATSSSRRDP
27.0073GPPAT command set for User Equipment (UE)Release 18TS
Table 10.1.70-1: + C5GATSSSRRDP action command syntax
|
Command |
Possible Response(s) |
|---|---|
|
+C5GATSSSRRDP[=<cid>] |
[+C5GATSSSRRDP: <cid>[,<ATSSS_rule-l>,<ATSSS_rule-c>]] [<CR><LF>+C5GATSSSRRDP: <cid>[,<ATSSS_rule-l>,<ATSSS_rule-c>] […]] |
|
+C5GATSSSRRDP=? |
+C5GATSSSRRDP: (list of <cid>s associated with QoS flows) |
Description
The execution command returns the ATSSS rules <ATSSS_rule-l> and <ATSSS_rule-c> of the QoS flow of the default QoS rule associated to the provided context identifier <cid>.
If the parameter <cid> is omitted, the ATSSS parameters for all QoS flows are returned.
The test command returns a list of <cid>s associated with all QoS flows.
Defined values
<cid>: integer type; specifies a particular QoS flow definition, Traffic Flows definition and a PDP Context definition (see the +CGDCONT and +CGDSCONT commands).
<ATSSS_rule-l>: integer type; indicates the length in octets of the <ATSSS_rule-c>.
<ATSSS_rule-c>: string type; coded as defined in 3GPP TS 24.193 [177] clause 6.1.3.2. This parameter shall not be subject to conventional character conversion as per +CSCS.
Implementation
Optional. This AT-cmd is appliccable to UEs that support ATSSS.