10.1.63 5GS NSSAI read dynamic parameters +C5GNSSAIRDP

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Table 10.1.63-1: +C5GNSSAIRDP action command syntax

Command	Possible Response(s)
+C5GNSSAIRDP[=<nssai_type>[,<plmn_id>]]	[+C5GNSSAIRDP: [<default_configured_nssai_length>,<default_configured_nssai>[,<rejected_nssai_3gpp_length>,<rejected_nssai_3gpp>[,<rejected_nssai_non3gpp_length>,<rejected_nssai_non3gpp>]]] [<CR><LF>+C5GNSSAIRDP: <plmn_id>[,<configured_nssai_length>,<configured_nssai>[,<allowed_nssai_3gpp_length>,<allowed_nssai_3gpp>,<allowed_nssai_non3gpp_length>,<allowed_nssai_non3gpp>]] [<CR><LF>+C5GNSSAIRDP: <plmn_id>[,<configured_nssai_length>,<configured_nssai>[,<allowed_nssai_3gpp_length>,<allowed_nssai_3gpp>,<allowed_nssai_non3gpp_length>,<allowed_nssai_non3gpp>]] […]]]]
+C5GNSSAIRDP=?	+C5GNSSAIRDP: (list of supported <nssai_type>s),(range of supported <plmn_id>s)

Command

Possible Response(s)

+C5GNSSAIRDP[=<nssai_type>[,<plmn_id>]]

[+C5GNSSAIRDP: [<default_configured_nssai_length>,<default_configured_nssai>[,<rejected_nssai_3gpp_length>,<rejected_nssai_3gpp>[,<rejected_nssai_non3gpp_length>,<rejected_nssai_non3gpp>]]]

[<CR><LF>+C5GNSSAIRDP: <plmn_id>[,<configured_nssai_length>,<configured_nssai>[,<allowed_nssai_3gpp_length>,<allowed_nssai_3gpp>,<allowed_nssai_non3gpp_length>,<allowed_nssai_non3gpp>]]

[…]]]]

+C5GNSSAIRDP=?

+C5GNSSAIRDP: (list of supported <nssai_type>s),(range of supported <plmn_id>s)

Description

The execution command returns the default configured NSSAI, rejected NSSAI for 3GPP access and rejected NSSAI for non-3GPP access stored at the MT, if any, as well as the configured NSSAI, allowed NSSAI for 3GPP access and allowed NSSAI for non-3GPP access stored at the MT, if any for the PLMN identified by <plmn_id>.

If the parameter <plmn_id> is omitted, the NSSAIs for all PLMNs for which the MT has stored NSSAI information are returned.

The test command returns the values supported as compound values.

Defined values

<nssai_type>: integer type; specifies the type of NSSAI to be returned.

0 return stored default configured NSSAI only

1 return stored default configured NSSAI and rejected NSSAI

2 return stored default configured NSSAI, rejected NSSAI and configured NSSAI

3 return stored default configured NSSAI, rejected NSSAI, configured NSSAI and allowed NSSAI

<plmn_id>: string type; indicates the MCC and MNC of the PLMN to which the NSSAI information applies. For the format and the encoding of the MCC and MNC, see 3GPP TS 23.003 [7]. This parameter shall not be subject to conventional character conversion as per +CSCS.

<default_configured_nssai_length>: integer type; the Terminal Adaptor (TA) can determine the value by parsing the <default_configured_nssai> parameter.

<default_configured_nssai>: string type in hexadecimal format. Dependent of the form, the string can be separated by dot(s), semicolon(s) and colon(s). This parameter indicates the list of S-NSSAIs included in the default configured NSSAI stored at the MT for the PLMN. The <default_configured_nssai> is coded as a list of <S-NSSAI>s separated by colons. Refer parameter <S-NSSAI> in clause 10.1.1. This parameter shall not be subject to conventional character conversion as per +CSCS.

<rejected_nssai_3gpp_length>: integer type; the Terminal Adaptor (TA) can determine the value by parsing the <rejected_nssai_3gpp> parameter.

<rejected_nssai_3gpp>: string type in hexadecimal format. Dependent of the form, the string can be separated by dot(s), colon(s) and hash(es). This parameter indicates the list of rejected S-NSSAIs associated with 3GPP access stored at the MT for the serving PLMN. The <rejected_nssai_3gpp> is coded as a list of rejected S-NSSAIs separated by colons. For the format and the encoding of S-NSSAI, see also 3GPP TS 23.003 [7]. This parameter shall not be subject to conventional character conversion as per +CSCS. The rejected S-NSSAI has one of the forms:

sst#cause only slice/service type (SST) and reject cause are present
sst.sd#cause SST and slice differentiator (SD) and reject cause are present

where cause is a cause value is according to 3GPP TS 24.501 [161] table 9.11.3.46.1.

<rejected_nssai_non3gpp_length>: integer type; the Terminal Adaptor (TA) can determine the value by parsing the <rejected_nssai_non3gpp> parameter.

<rejected_nssai_non3gpp>: string type in hexadecimal format. Dependent of the form, the string can be separated by dot(s), colon(s) and hash(es). This parameter indicates the list of rejected S-NSSAIs associated with non-3GPP access stored at the MT for the serving PLMN. The <rejected_NSSAI_non3gpp> is coded as a list of rejected S-NSSAIs separated by colon. For the format and the encoding of S-NSSAI, see also 3GPP TS 23.003 [7]. This parameter shall not be subject to conventional character conversion as per +CSCS. The rejected S-NSSAI has one of the forms:

sst#cause only slice/service type (SST) and reject cause are present
sst.sd#cause SST and slice differentiator (SD) and reject cause are present

where cause is a cause value is according to 3GPP TS 24.501 [161] table 9.11.3.46.1.

<configured_nssai_length>: integer type; the Terminal Adaptor (TA) can determine the value by parsing the <configured_nssai> parameter.

<configured_nssai>: string type in hexadecimal format. Dependent of the form, the string can be separated by dot(s), semicolon(s) and colon(s). This parameter indicates the list of configured S-NSSAIs stored at the MT for the PLMN identified by <plmn_id>. The <configured_nssai> is coded as a list of <S-NSSAI>s separated by colons. Refer parameter <S-NSSAI> in clause 10.1.1. This parameter shall not be subject to conventional character conversion as per +CSCS.

<allowed_nssai_3gpp_length>: integer type; the Terminal Adaptor (TA) can determine the value by parsing the <allowed_nssai_3gpp> parameter.

<allowed_nssai_3gpp>: string type in hexadecimal format. Dependent of the form, the string can be separated by dot(s), semicolon(s) and colon(s). This parameter indicates the list of allowed S-NSSAIs associated with 3GPP access stored at the MT for the PLMN identified by <plmn_id>. The <allowed_nssai_3gpp> is coded as a list of <S-NSSAI>s separated by colons. Refer parameter <S-NSSAI> in clause 10.1.1. This parameter shall not be subject to conventional character conversion as per +CSCS.

<allowed_nssai_non3gpp_length>: integer type; the Terminal Adaptor (TA) can determine the value by parsing the <allowed_nssai_non3gpp> parameter.

<allowed_nssai_non3gpp>: string type in hexadecimal format. Dependent of the form, the string can be separated by dot(s), semicolon(s) and colon(s). This parameter indicates the list of allowed S-NSSAIs associated with non-3GPP access stored at the MT for the PLMN identified by <plmn_id>. The <allowed_nssai_non3gpp> is coded as a list of <S-NSSAI>s separated by colons. Refer parameter <S-NSSAI> in clause 10.1.1. This parameter shall not be subject to conventional character conversion as per +CSCS.

Implementation

Optional.