10.1.55 S-NSSAI based back-off timer status reporting +CSBTSR

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Table 10.1.55-1: +CSBTSR parameter command syntax

Command	Possible response(s)
+CSBTSR=[<n>]	+CME ERROR: <err>
+CSBTSR?	+CSBTSR: <n>
+CSBTSR=?	+CSBTSR: (list of supported <n>s)

Description

Set command controls the presentation of unsolicited result code +CSBTSRI: <S-NSSAI>,<event_type>[,<S-NSSAI_backoff_time>,<5GSM_congestion_re-attempt_abo_indicator>,<5GSM_congestion_re-attempt_catbo_indicator>[,<procedure>]] reporting the S-NSSAI based back-off timer parameter values from MT to TE if the back-off timer is started, stopped, deactivated or expires. Refer clause 9.2 for possible <err> values.

Read command returns the current S-NSSAI based back-off timer unsolicited result code settings in the MT.

Test command returns values supported as a compound value.

Defined values

<n>: integer type.

0 Disable presentation of the unsolicited result code +CSBTSRI.

1 Enable presentation of the unsolicited result code +CSBTSRI.

<S-NSSAI>: string type in hexadecimal format. Dependent of the form, the string can be separated by dot(s) and semicolon(s). The S-NSSAI is associated with the back-off timer for identifying a network slice in 5GS, see 3GPP TS 23.501 [165] and 3GPP TS 24.501 [161]. Refer parameter <S-NSSAI> in clause 10.1.1. This parameter shall not be subject to conventional character conversion as per +CSCS.

<event_type>: integer type. Indicates the event happened to the back-off timer.

0 The back-off timer is started.

1 The back-off timer is stopped.

2 The back-off timer is expired.

3 The back-off timer is deactivated.

<S-NSSAI_backoff_time>: integer type; indicates the remaining back-off time associated with the <S-NSSAI> in seconds. When the back-off timer is deactivated, the parameter <S-NSSAI_backoff_time> is omitted. When the back-off timer is stopped or expired, 0 is indicated.

<5GSM_congestion_re-attempt_abo_indicator>: integer type. Indicates whether the back-off timer is applied in the registered PLMN or all PLMNs.

0 The back-off timer is applied in the registered PLMN.

1 The back-off timer is applied in all PLMNs.

<5GSM_congestion_re-attempt_catbo_indicator>: integer type. Indicates whether the back-off timer is applied in the current access type or both 3GPP access type and non-3GPP access type.

0 The back-off timer is applied in both 3GPP access type and non-3GPP access type.

1 The back-off timer is applied in the current access type.

<procedure>: integer type. Indicates the procedure(s) for which the back-off timer applies. When <procedure>=0 the information returned is associated with timer T3585. When the parameter <procedure> is omitted, the back-off timer is deactivated.

0 All procedures.

Implementation

Optional.