10.1.50 5GS quality of service read dynamic parameters +C5GQOSRDP

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Table 10.1.50-1: +C5GQOSRDP action command syntax

Command	Possible Response(s)
+C5GQOSRDP[=<cid>]	[+C5GQOSRDP: <cid>,<5QI>[,<DL_GFBR>,<UL_GFBR>[,<DL_MFBR>,<UL_MFBR>[,<DL_SAMBR>,<UL_SAMBR>[,<Averaging_window>]]]]] [<CR><LF>+C5GQOSRDP: <cid>,<5QI>[,<DL_GFBR>,<UL_GBR>[,<DL_MFBR>,<UL_MFBR>[,<DL_SAMBR>,<UL_SAMBR>[,<Averaging_window>]]]] […]]
+C5GQOSRDP=?	+C5GQOSRDP: (list of <cid>s associated with QoS flows)

Description

The execution command returns the Quality of Service parameters <5QI>, [<DL_GFBR> and <UL_GFBR>], [<DL_MFBR> and <UL_MFBR>], [<DL_SAMBR> and <UL_SAMBR>] and <Averaging_window> of the QoS flow associated to the provided context identifier <cid>.

If the parameter <cid> is omitted, the Quality of Service parameters for all QoS flows are returned.

The test command returns a list of <cid>s associated with all QoS flows.

Parameters of both network and MT/TA initiated QoS flows will be returned.

Defined values

<cid>: integer type; specifies a particular QoS flow definition, Traffic Flows definition and a PDP Context definition (see the +CGDCONT and +CGDSCONT commands).

<5QI>: integer type; specifies a class of 5GS QoS (see 3GPP TS 23.501 [165] and 3GPP TS 24.501 [161]).

0 5QI is selected by network

[1 – 4] value range for guaranteed bit rate QoS flows

65, 66, 67 values for guaranteed bit rate QoS flows

[71 – 76] value range for guaranteed bit rate QoS flows

[5 – 10] value range for non-guaranteed bit rate QoS flows

69, 70, 79, 80 values for non-guaranteed bit rate QoS flows

[82 – 86] value range for delay critical guaranteed bit rate QoS flows

[87 – 90] value range for Advanced Interactive Services bit rate QoS flows

[128 – 254] value range for Operator-specific 5QIs

<DL_GFBR>: integer type; indicates DL GFBR in case of GBR 5QI. The value is in kbit/s. This parameter is omitted for a non-GBR 5QI (see 3GPP TS 24.501 [161]).

<UL_GFBR>: integer type; indicates UL GFBR in case of GBR 5QI. The value is in kbit/s. This parameter is omitted for a non-GBR 5QI (see 3GPP TS 24.501 [161]).

<DL_MFBR>: integer type; indicates DL MFBR in case of GBR 5QI. The value is in kbit/s. This parameter is omitted for a non-GBR 5QI (see 3GPP TS 24.501 [161]).

<UL_MFBR>: integer type; indicates UL MFBR in case of GBR 5QI. The value is in kbit/s. This parameter is omitted for a non-GBR 5QI (see 3GPP TS 24.501 [161]).

<UL_SAMBR>: integer type; indicates the UL session AMBR (see 3GPP TS 24.501 [161]). The value is in kbit/s.

<DL_SAMBR>: integer type; indicates the DL session AMBR (see 3GPP TS 24.501 [161]). The value is in kbit/s.

<Averaging_window>: integer type; indicates the averaging window (see 3GPP TS 24.501 [161]). The value is in milliseconds.

Implementation

Optional.