10.1.34 UE’s usage setting for EPS and 5GS +CEUS

27.0073GPPAT command set for User Equipment (UE)Release 18TS

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Table 10.1.34-1: +CEUS parameter command syntax

Command	Possible Response(s)
+CEUS=[<setting>]
+CEUS?	+CEUS: <setting>
+CEUS=?	+CEUS: (list of supported <setting>s)

Description

The set command is used to set the MT to operate according to the specified UE’s usage setting for EPS (see 3GPP TS 24.301 [83]) and 5GS (see 3GPP TS 24.501 [161]). A UE that supports both S1 mode and N1 mode has a single UE’s usage setting which applies to both EPS and 5GS.

The read command returns the usage setting set by the TE.

The test command is used for requesting information on the supported MT setting(s) as a compound value.

Defined values

<setting>: integer type; indicates the usage setting of the UE. The default value is manufacturer specific.

0 voice centric

1 data centric

NOTE: The definition for UE’s usage setting can be found in 3GPP TS 24.301 [83].

Implementation

Optional.