A.3.2.15 Reference Measurement Channel for category 30 UE
25.1023GPPRelease 17TSUser Equipment (UE) radio transmission and reception (TDD)
A.3.2.15.1 64QAM modulation scheme
Table A.28A Reference Measurement Channel for Category 30 (64QAM)
|
Parameter |
Unit |
Value |
|
|
Stream |
1st stream |
2nd stream |
|
|
Modulation |
– |
64QAM |
64QAM |
|
Combined Nominal Avg. Inf. Bit Rate |
Mbps |
4.9072 |
|
|
Nominal Avg. Inf. Bit Rate per stream |
kbps |
2542.4 |
2364.8 |
|
Number of HARQ Processes |
Processes |
4 |
4 |
|
Information Bit Payload ( |
Bits |
12712 |
11824 |
|
Number Code Blocks |
Blocks |
3 |
3 |
|
Total Available of Soft Channel bits in UE |
Bits |
506880 |
|
|
Number of Soft Channel bit per HARQ Proc. |
Bits |
63360 |
63360 |
|
Number of coded bits per TTI |
Bits |
21120 |
21120 |
|
Coding Rate |
– |
0.602 |
0.560 |
|
Number of HS-DSCH Timeslots |
Slots |
5 |
5 |
|
Number of HS-PDSCH codes per TS |
Codes |
16 |
16 |
|
Spreading factor |
SF |
16 |
16 |
|
Note: For UE support SF=1 only in dual stream transmission, both the number of HS-PDSCH codes per TS and spreading factor in the FRC should be changed to 1. |
|||
)
Figure A.36A Reference Measurement Channel for Category 30 (64QAM) – First Stream
Figure A.37A Reference Measurement Channel for Category 30 (64QAM) – Second Stream