11 Performance requirement (E-DCH)
25.1023GPPRelease 17TSUser Equipment (UE) radio transmission and reception (TDD)
Unless otherwise stated the receiver characteristics are specified at the antenna connector of the UE. For UE(s) with an integral antenna only, a reference antenna with a gain of 0 dBi is assumed. UE with an integral antenna may be taken into account by converting these power levels into field strength requirements, assuming a 0 dBi gain antenna. For Ues with more than one receiver antenna connector the fading of the signals and the AWGN signals applied to each receiver antenna connector shall be uncorrelated. The levels of the test signal applied to each of the antenna connectors shall be as defined in the respective sections below.
11.1 Detection of E-DCH HARQ ACK Indicator Channel (E-HICH)
The performance of the E-HICH detection is determined by the false ACK probability (probability of detecting an ACK given that a NACK was sent) and the false NACK probability (probability of detecting a NACK given that an ACK was sent).
11.1.1 Minimum requirement
11.1.1.1 3.84 Mcps TDD Option
For the parameters specified in Table 11.1 the average downlink E-HICH Ec/Ior power ratio shall be below the specified value for the false ACK and false NACK probabilities shown in Table 11.2.
Table 11.1: Test parameters for E-HICH detection (3.84 Mcps TDD option)
Parameters |
Unit |
Test 1 |
Test 2 |
Ioc |
dBm/3.84 MHz |
-60 |
|
|
dB |
0 |
|
Number of Interfering codes/timeslot |
– |
7 × SF16 (all codes have equal powers) |
|
E-HICH signalling pattern |
– |
100% NACK |
100% ACK |
Propagation condition |
– |
VA30 |
Table 11.2: Test requirements for E-HICH detection (3.84 Mcps TDD option)
Test Number |
E-HICH Ec/Ior (dB) |
Parameter |
Probability |
1 |
-18.5 |
False ACK |
2E-3 |
2 |
-18.5 |
False NACK |
2E-2 |
11.1.1.2 1.28 Mcps TDD Option
For the parameters specified in Table 11.3 the average downlink E-HICH Ec/Ior power ratio shall be below the specified value for the false ACK and false NACK probabilities shown in Table 11.4.
Table 11.3: Test parameters for E-HICH detection (1.28 Mcps TDD option)
Parameters |
Unit |
Test 1 |
Test 2 |
Ioc |
dBm/1.28 MHz |
-60 |
|
|
dB |
0 |
|
Number of Interfering codes/timeslot |
– |
7 × SF16 (all codes have equal powers) |
|
Midamble |
– |
Common midamble |
|
E-HICH signalling pattern |
– |
100% NACK |
100% ACK |
Propagation condition |
– |
VA30 |
Table 11.4: Test requirements for E-HICH detection (1.28 Mcps TDD option)
Test Number |
E-HICH Ec/Ior (dB) |
Parameter |
Probability |
1 |
-7.5 |
False ACK |
2E-3 |
2 |
-7.5 |
False NACK |
2E-2 |
11.1.1.3 7.68 Mcps TDD Option
For the parameters specified in Table 11.5 the average downlink E-HICH Ec/Ior power ratio shall be below the specified value for the false ACK and false NACK probabilities shown in Table 11.6.
Table 11.5: Test parameters for E-HICH detection (7.68 Mcps TDD option)
Parameters |
Unit |
Test 1 |
Test 2 |
Ioc |
dBm/7.68 MHz |
-60 |
|
|
dB |
0 |
|
Number of Interfering codes/timeslot |
– |
15 × SF32 (all codes have equal powers) |
|
E-HICH signalling pattern |
– |
100% NACK |
100% ACK |
Propagation condition |
– |
VA30 |
Table 11.6: Test requirements for E-HICH detection (7.68 Mcps TDD option)
Test Number |
E-HICH Ec/Ior (dB) |
Parameter |
Probability |
1 |
-21.7 |
False ACK |
2E-3 |
2 |
-21.7 |
False NACK |
2E-2 |
11.2 Demodulation of E-DCH Absolute Grant Channel (E-AGCH)
The performance of the E-AGCH detection is determined by the missed detection probability.
11.2.1 Minimum requirement
11.2.1.1 3.84 Mcps TDD Option
For the parameters specified in Table 11.7 the average downlink E-AGCH Îor/Ioc power ratio shall be below the specified value for the missed detection probability shown in Table 11.8.
Table 11.7: Test parameters for E-AGCH detection (3.84 Mcps TDD option)
Parameters |
Unit |
Test 1 |
Ioc |
dBm/3.84 MHz |
-60 |
dB |
-6.02 |
|
Number of Interfering codes/timeslot |
– |
3 × SF16 |
Total bits in Timeslot Resource Related Information (TRRI) |
bits |
6 |
Total bits in Resource Duration Indicator (RDI) |
bits |
3 |
Total bits in E-AGCH |
bits |
38 |
Propagation condition |
– |
VA30 |
Table 11.8: Test requirements for E-AGCH detection (3.84 Mcps TDD option)
Test Number |
E-AGCH Îor/Ioc (dB) |
Missed Detection Probability |
1 |
1.6 |
0.01 |
11.2.1.2 1.28 Mcps TDD Option
For the parameters specified in Table 11.9 the average downlink E-AGCH type 1 Îor/Ioc power ratio shall be below the specified value for the missed detection probability shown in Table 11.10.
Table 11.9: Test parameters for E-AGCH type 1 detection (1.28 Mcps TDD option)
Parameters |
Unit |
Test 1 |
Ioc |
dBm/1.28 MHz |
-60 |
dB |
-3 |
|
Number of Interfering codes/timeslot |
– |
2 × SF16 |
Total bits in Timeslot Resource Related Information (TRRI) |
bits |
5 |
Total bits in Resource Duration Indicator (RDI) |
bits |
3 |
Total bits in E-AGCH |
bits |
26 |
Midamble |
– |
Common midamble |
Propagation condition |
– |
VA30 |
Table 11.10: Test requirements for E-AGCH type 1 detection (1.28 Mcps TDD option)
Test Number |
E-AGCH Îor/Ioc (dB) |
Missed Detection Probability |
1 |
8 |
0.01 |
For the parameters specified in Table 11.9A the average downlink E-AGCH type 2 Îor/Ioc power ratio shall be below the specified value for the missed detection probability shown in Table 11.10A.
Table 11.9A: Test parameters for E-AGCH type 2 detection (1.28 Mcps TDD option)
Parameters |
Unit |
Test 1 |
Ioc |
dBm/1.28 MHz |
-60 |
dB |
-3 |
|
Number of Interfering codes/timeslot |
– |
2 × SF16 |
Total bits in E-AGCH |
bits |
30 |
Midamble |
– |
Common midamble |
Propagation condition |
– |
VA30 |
Table 11.10A: Test requirements for E-AGCH type 2 detection (1.28 Mcps TDD option)
Test Number |
E-AGCH Îor/Ioc (dB) |
Missed Detection Probability |
1 |
8.5 |
0.01 |
11.2.1.3 7.68 Mcps TDD Option
For the parameters specified in Table 11.11 the average downlink E-AGCH Îor/Ioc power ratio shall be below the specified value for the missed detection probability shown in Table 11.12.
Table 11.11: Test parameters for E-AGCH detection (7.68 Mcps TDD option)
Parameters |
Unit |
Test 1 |
Ioc |
dBm/7.68 MHz |
-60 |
dB |
-9.03 |
|
Number of Interfering codes/timeslot |
– |
7 × SF32 |
Total bits in Timeslot Resource Related Information (TRRI) |
bits |
6 |
Total bits in Resource Duration Indicator (RDI) |
bits |
3 |
Total bits in E-AGCH |
bits |
39 |
Propagation condition |
– |
VA30 |
Table 11.12: Test requirements for E-AGCH detection (7.68 Mcps TDD option)
Test Number |
E-AGCH Îor/Ioc (dB) |
Missed Detection Probability |
1 |
1.2 |
0.01 |