8.1 General

25.1023GPPRelease 17TSUser Equipment (UE) radio transmission and reception (TDD)

The performance requirements for the UE in this section are specified for the measurement channels specified in Annex A and the propagation condition specified in Annex B. Unless otherwise stated the receiver characteristics are specified at the antenna connector of the UE. For UE(s) with an integral antenna only, a reference antenna with a gain of 0 dBi is assumed. UE with an integral antenna may be taken into account by converting these power levels into field strength requirements, assuming a 0 dBi gain antenna. For Ues with more than one receiver antenna connector the fading of the signals and the AWGN signals applied to each receiver antenna connector shall be uncorrelated. The levels of the test signal applied to each of the antenna connectors shall be as defined in the respective sections below.

Table 8.1: Summary of UE performance targets

Test Chs.	Information Data Rate	Static	Multi-path Case 1	Multi-path Case 2	Multi-path Case 3	High speed train*
		Performance metric
DCH	12.2 kbps	BLER<10-2	BLER<10-2	BLER<10-2	BLER<10-2	BLER< 10-2
	64 kbps	BLER< 10-1, 10-2	BLER< 10-1, 10-2	BLER< 10-1, 10-2	BLER<10-1, 10-2, 10-3	BLER< 10-1, 10-2
	144 kbps	BLER< 10-1, 10-2	BLER< 10-1, 10-2	BLER< 10-1, 10-2	BLER<10-1, 10-2, 10-3	–
	384 kbps	BLER< 10-1, 10-2	BLER< 10-1, 10-2	BLER< 10-1, 10-2	BLER<10-1, 10-2, 10-3	–
	2048 kbps	BLER < 10-1, 10-2	BLER< 10-1, 10-2	BLER< 10-1, 10-2	BLER<10-1, 10-2, 10-3	–
BCH	12.3kbps		BLER< 10-2			–