9.1 Performance requirement for 3.84 Mcps TDD option

25.1023GPPRelease 17TSUser Equipment (UE) radio transmission and reception (TDD)

The requirements are stated for the HSDPA UE reference combination classes specified in [2] and under the multipath propagation conditions specified in Annex B. The performance metric for HS-DSCH requirements in multi-path propagation conditions is the throughput R measured on HS-DSCH.

9.1.1 HS-DSCH throughput for fixed reference channels

The performance requirements in this subclause apply for the reference measurement channels specified in Annex A.3.2.

During the Fixed Reference Channel tests the behaviour of the Node-B emulator in response to the ACK/NACK signalling field of the HS-SICH is specified in Table 9.1:

Table 9.1: Node-B Emulator Behaviour in response to ACK/NACK/DTX

HS-SICH ACK/NACK Field State

Node-B Emulator Behaviour

ACK

ACK: new transmission using 1st redundancy version (RV)

NACK

NACK: retransmission using the next RV (up to the maximum permitted number or RV’s)

DTX

DTX: retransmission using the RV previously transmitted to the same H-ARQ process

9.1.1.1 Minimum requirement QPSK, Fixed Reference Channel, 7,3 Mbps – Category 8 – UE

For the parameters specified in Table 9.2, the measured throughput R shall exceed the throughput specified in Table 9.3 for each radio condition.

Table 9.2: Test parameters for fixed reference measurement channel requirements for 7,3 Mbps – Category 8 – UE (3,84 Mcps TDD Option) QPSK

Parameters

Unit

Test 1

Test 2

Test 3

Test 4

HS-PDSCH Modulation

–

QPSK

Scrambling code and basic midamble code number*

–

0, 1

Number of TS

–

8

HS-PDSCH Channelization Codes*

C(k,Q)

C(i,16)

i=1..16

C(i,16)

i=1..14

Number of Hybrid ARQ processes

–

4

Maximum number of Hybrid ARQ transmissions

–

4

Redundancy and constellation version coding sequence**

–

{0,0,0,0}
s=1, R=0, b=0

dB

-12,04

-11.46

dB

0

Ioc

dBm/3,84MHz

-60

Note *: Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code.

Note **: This sequence implies Chase combining

Table 9.3: Performance requirements for fixed reference measurement channel requirement in multipath channels for 7,3 Mbps – Category 8 – UE (3,84 Mcps TDD Option) QPSK

Test Number

Propagation conditions

[dB]

R (Throughput) [kbps]

1

PA3

8,5

1300

2

PB3

9,0

1300

3

VA30

9,75

1300

4

VA120

11,5

1400

9.1.1.2 Minimum requirement 16QAM, Fixed Reference Channel, 7,3 Mbps – Category 8 – UE

For the parameters specified in Table 9.4, the measured throughput R shall exceed the throughput specified in Table 9.5 for each radio condition.

Table 9.4: Test parameters for fixed reference measurement channel requirements for 7,3 Mbps – Category 8 – UE (3,84 Mcps TDD Option) 16QAM

Parameters

Unit

Test 1

Test 2

Test 3

Test 4

HS-PDSCH Modulation

–

16QAM

Scrambling code and basic midamble code number*

–

0, 1

Number of TS

–

8

HS-PDSCH Channelization Codes*

C(k,Q)

C(i,16)
i=1..16

C(i,16)
i=1..14

Number of Hybrid ARQ processes

–

4

Maximum number of Hybrid ARQ transmissions

–

4

Redundancy and constellation version coding sequence**

–

{0,0,0,0}
s=1, r=0

dB

-12,04

-11,46

dB

0

Ioc

dBm/3,84MHz

-60

Note *: Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code.

Note **: This sequence implies Chase combining

Table 9.5: Performance requirements for fixed reference measurement channel requirement in multipath channels for 7,3 Mbps – Category 8 – UE (3,84 Mcps TDD Option) 16QAM

Test Number

Propagation conditions

[dB]

R (Throughput) [kbps]

1

PA3

16,0

2600

2

PB3

17,5

2600

3

VA30

18,5

2600

4

VA120

14,5

1600

9.1.2 HS-DSCH throughput for Variable Reference Channels

9.1.2.1 Minimum requirement Variable Reference Channel, 7,3 Mbps – Category 8 – UE

For the parameters specified in Table 9.6 the measured throughput R shall exceed the throughput specified in Table 9.7 for each radio condition. The Variable Reference Channel is specified in Annex A.3.3.

Table 9.6: Test parameters for variable reference measurement channel requirements for 7,3 Mbps – Category 8 – UE (3,84 Mcps TDD Option)

Parameters

Unit

Test 1

Test 2

Test 3

Test 4

Scrambling code and basic midamble code number*

–

0, 1

Number of TS

–

8

HS-PDSCH Channelization Codes*

C(k,Q)

C(i,16)

i=1..16

Number of Hybrid ARQ processes**

–

4

Maximum number of Hybrid ARQ transmissions

–

1

Redundancy and constellation version coding sequence

(Xrv, s, r, b)

(0, 1, 0, 0)

HS-PDSCHi_Ec/Ior

dB

-12,04

dB

0

Ioc

dBm/3,84MHz

-60

Note *: Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code.

Note **: For timing requirements, HARQ is not active

Table 9.7: Performance requirements for variable reference measurement channel requirement in multipath channels for 7,3 Mbps – Category 8 – UE (3,84 Mcps TDD Option)

Test Number

Propagation conditions

[dB]

R (Throughput) [kbps]

1

PA3

8,8

1240

14,8

2500

18,8

3600

24,8

5000

2

PB3

8,8

1220

14,8

2430

20,8

4030

24,8

5080

3

VA30

10,1

1190

16,1

2290

20,1

3220

24,1

4260

4

VA120

7,1

590

11,1

1180

15,1

1840

19,1

2390

9.1.3 Reporting of Channel Quality Indicator

The reporting accuracy of channel quality indicator (CQI) under AWGN environments is determined by the reporting variance and BLER performance using the transport format indicated by the reported median CQI.

9.1.3.1 Minimum requirement Channel Quality Indicator, 7,3 Mbps – Category 8 – UE

For the parameters specified in Table 9.7A the reported CQI value shall be within the range of +/- 10 of the allowable CQIs of the reported median CQI more than 90% of the time. The BLER for the reported median CQI shall be less than 10%.

Table 9.7A: Test parameters for variable reference measurement channel requirements for 7,3 Mbps – Category 8 – UE (3,84 Mcps TDD Option)

Parameters

Unit

Test 1

Test 2

Scrambling code and basic midamble code number*

–

0, 1

Number of TS

–

8

HS-PDSCH Channelization Codes*

C(k,Q)

C(i,16)

i=1..16

Number of Hybrid ARQ processes**

–

4

Maximum number of Hybrid ARQ transmissions

–

1

Redundancy and constellation version coding sequence

(Xrv, s, r, b)

(0, 1, 0, 0)

HS-PDSCHi_Ec/Ior

dB

-12,04

dB

0

dB

5

10

Ioc

dBm/3,84MHz

-60

Note*: Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code.

Note**: For timing requirements, HARQ is not active

9.1.4 HS-SCCH Detection Performance

The detection performance of the HS-SCCH is determined by the probability of event Em, which is declared when the UE is signaled on HS-SCCH, but DTX is observed in the corresponding HS-SICH ACK/NACK field. The probability of event Em is denoted P(Em).

9.1.4.1 Minimum Requirements for HS-SCCH Detection

For the test parameters in Table 9.7B, for each value of HS-SCCH-1 Ec/Ior specified in Table 9.7C, the measured P(Em) shall be less than or equal to the corresponding specified value of P(Em).

Table 9.7B: Test parameters for HS-SCCH detection (3.84 Mcps TDD option)

Parameter

Unit

Test 1

Test 2

Test 3

Number of TS under test

–

1

Number of HS-SCCH codes per timeslot

–

4

HS-SCCH UE Identity

(,, …, )

–

UE1 = 0000000000000000

(UE1 under test)

UE2 = 0101010101010101

UE3 = 1010101010101010

UE4 = 1111111111111111

HS-SCCH Channelization Codes*

C(k,Q)

HS-SCCH-1 = C(1, 16), for UE1 (UE under test)

HS-SCCH-2 = C(2, 16) for UE2

HS-SCCH-3 = C(3, 16) for UE3

HS-SCCH-4 = C(4, 16) for UE4

HS-SCCH Ec/Ior

dB

HS-SCCH-2_Ec/Ior = HS-SCCH-3_Ec/Ior = HS-SCCH-4_Ec/Ior,

Where,  HS-SCCH-X_Ec/Ior = 1, where X = 1, 2, 3, 4

Table 9.7C: Minimum requirement for HS-SCCH detection (3.84 Mcps TDD option)

Test Number

Propagation Conditions

Reference value

HS-SCCH-1
(dB)

(dB)

1

PA3

-1.6

0

0.05

2

PA3

-3.0

5

0.01

3

VA30

-2.5

0

0.01