9.2.4 HS-SCCH Detection Performance
25.1023GPPRelease 17TSUser Equipment (UE) radio transmission and reception (TDD)
The detection performance of the HS-SCCH is determined by the probability of event Em, which is declared when the UE is signaled on HS-SCCH, but DTX is observed in the corresponding HS-SICH ACK/NACK field. The probability of event Em is denoted P(Em).
9.2.4.1 Minimum Requirements for HS-SCCH Type 1 Detection
For the test parameters specified in Table 9.17, for each value of HS-SCCH specified in Table 9.18 the measured P(Em) shall be less than or equal to the corresponding specified value of P(Em).
Table 9.17: Test parameters for HS-SCCH type 1 detection (1.28Mcps TDD option)
Parameter |
Unit |
Test 1 |
Test2 |
||
Number of TS under test |
– |
1 |
|||
Number of HS-SCCH codes per timeslot |
– |
8 (4 x2) |
|||
Scrambling code and basic midamble code number* |
– |
0 |
|||
Number of DPCHo |
– |
2 |
|||
Number of H-ARQ process |
– |
4 |
|||
HS-SCCH UE Identity ( |
– |
UE1 = 0000000000000000 (UE1 under test) UE2 = 0101010101010101 UE3 = 1010101010101010 UE4 = 1111111111111111 |
|||
HS-SCCH Channelization Codes* |
C(k,Q) |
C(i,16) 1i8 |
|||
HS-SCCH Channelization Codes for UE under test |
C(k,Q) |
C(i,16) 1i2 |
|||
DPCHo Channelization Codes |
C(k,Q) |
C(i,16) 9i10 |
|||
Power control for HS-SCCH of UE 1 |
– |
OFF |
|||
dB |
-10 |
||||
Ioc** |
dBm/1.28MHz |
-60 |
|||
Note *: Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. Note ** For multi-carrier reception, it refers to |
Table 9.18: Minimum requirement for HS-SCCH type 1 detection (1.28Mcps TDD option)
Test Number |
Propagation Conditions |
|
|
1 |
PA3 |
16 |
0.01 |
2 |
VA30 |
12 |
0.01 |
Note1 For multi-carrier reception, it refers to Note2 For multi-carrier reception, it refers to |
9.2.4.2 Minimum Requirements for HS-SCCH Type 4/5 Detection
For the test parameters specified in Table 9.18AA, for each value of HS-SCCH specified in Table 9.18AA the measured P(Em) shall be less than or equal to the corresponding specified value of P(Em). Minimum performance requirements specified in Table 9.18AB are based on receiver diversity.
The requirments for HS-SCCH Type4 in this section does not applicable to UE which only support MU-MIMO but do not support SU-MIMO.
Table 9.18AA: Test parameters for HS-SCCH Type 4/5 detection (1.28Mcps TDD option)
Parameter |
Unit |
Test 1 |
Test2 |
||
Number of TS under test |
– |
1 |
|||
Number of HS-SCCH codes per timeslot |
– |
8 (4 x2) |
|||
Scrambling code and basic midamble code number* |
– |
0 |
|||
Number of DPCHo |
– |
2 |
|||
Number of H-ARQ process |
– |
4 |
|||
HS-SCCH Channelization Codes* |
C(k,Q) |
C(i,16) 1i8 |
|||
HS-SCCH Channelization Codes for UE under test |
C(k,Q) |
C(i,16) 1i2 |
|||
DPCHo Channelization Codes |
C(k,Q) |
C(i,16) 9i10 |
|||
Power control for HS-SCCH of UE 1 |
– |
OFF |
|||
dB |
-10 |
||||
Ioc |
dBm/1.28MHz |
-60 |
|||
Note *: Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. |
Table 9.18AB: Minimum requirement for HS-SCCH Type 4/5 detection (1.28Mcps TDD option)
Test Number |
Propagation Conditions |
|
|
1 |
PA3 |
12.3 |
0.01 |
2 |
VA30 |
9.2 |
0.01 |
9.2.4.3 Minimum Requirements for HS-SCCH Type 6/7/8/9 Detection
For the test parameters specified in Table 9.18AC, for each value of HS-SCCH specified in Table 9.18AD the measured P(Em) shall be less than or equal to the corresponding specified value of P(Em). Minimum performance requirements specified in Table 9.18AD are based on receiver diversity.
Table 9.18AC: Test parameters for HS-SCCH Type 6/7/8/9 detection (1.28Mcps TDD option)
Parameter |
Unit |
Test 1 |
Test2 |
||
Number of TS under test |
– |
1 |
|||
Number of HS-SCCH codes per timeslot |
– |
8 (4 x2) |
|||
Scrambling code and basic midamble code number* |
– |
0 |
|||
Number of DPCHo |
– |
2 |
|||
Number of H-ARQ process |
– |
4 |
|||
HS-SCCH Channelization Codes* |
C(k,Q) |
C(i,16) 1i8 |
|||
HS-SCCH Channelization Codes for UE under test |
C(k,Q) |
C(i,16) 1i2 |
|||
DPCHo Channelization Codes |
C(k,Q) |
C(i,16) 9i10 |
|||
Power control for HS-SCCH of UE 1 |
– |
OFF |
|||
dB |
-10 |
||||
Ioc |
dBm/1.28MHz |
-60 |
|||
Note *: Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. |
Table 9. 18AD: Minimum requirement for HS-SCCH Type 6/7/8/9 detection (1.28Mcps TDD option)
Test Number |
Propagation Conditions |
|
|
1 |
PA3 |
12.5 |
0.01 |
2 |
VA30 |
9.4 |
0.01 |