9.2.2 HS-DSCH throughput for Variable Reference Channels
25.1023GPPRelease 17TSUser Equipment (UE) radio transmission and reception (TDD)
9.2.2.1 Category 1, 0.5Mbps UE class
For the parameters specified in Table 9.13 the measured throughput R shall exceed the throughput specified in Table 9.14 for each radio condition.
Table 9.13: Test parameters for variable reference channel, 0.5Mbps UE class
Parameter |
Unit |
Test 1 |
Test 2 |
Test 3 |
HS-PDSCH Modulation and TBS |
– |
* |
||
Scrambling code and basic midamble code Number ** |
– |
1 |
||
Number of TS |
– |
2 |
||
Number of DPCHo |
– |
0 |
||
Number of HARQ Process |
– |
4 |
||
Number of transmission |
– |
1 |
||
Redundancy and constellation version coding sequence |
Xrv |
0 |
||
HS-PDSCH Channelization Codes** |
C(k,Q) |
C(i,16) 1i10 |
||
HS-PDSCHi_Ec/Ior |
dB |
-10 |
||
Ioc**** |
dBm |
-60 |
||
* Note 1 As requested by the last received CQI report **Note 2 Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. ***Note 3 If the indicated CQI is 0, the Node-B emulator shall format the next HS-PDSCH transmission with the transport block size and the modulation scheme that were previously used. ****Note 4 For multi-carrier reception, it refers to the interference power on each carrier. |
Table 9.14: Performance requirements for variable reference channel, 0.5Mbps UE class
Test Number |
Propagation conditions |
|
R (Throughput) [kbps](Note2) |
1 |
PA3 |
15 |
242 |
2 |
PB3 |
15 |
244 |
3 |
VA30 |
15 |
211 |
Note 1: For multi-carrier reception, it refers to Note 2 For multi-carrier reception, R refers to throughput on each carrier. |
9.2.2.2 Category 4, 1.1Mbps UE class
For the parameters specified in Table 9.13-1 the measured throughput R shall exceed the throughput specified in Table 9.14-1 for each radio condition.
Table 9.13-1: Test parameters for variable reference channel, 1.1Mbps UE class
Parameter |
Unit |
Test 1 |
Test 2 |
Test 3 |
HS-PDSCH Modulation and TBS |
– |
* |
||
Scrambling code and basic midamble code Number ** |
– |
1 |
||
Number of TS |
– |
2 |
||
Number of DPCHo |
– |
0 |
||
Number of HARQ Process |
– |
4 |
||
Number of transmission |
– |
1 |
||
Redundancy and constellation version coding sequence |
Xrv |
0 |
||
HS-PDSCH Channelization Codes** |
C(k,Q) |
C(i,16) 1i10 |
||
HS-PDSCHi_Ec/Ior |
dB |
-10 |
||
Ioc**** |
dBm |
-60 |
||
* Note 1 As requested by the last received CQI report **Note 2 Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. ***Note 3 If the indicated CQI is 0, the Node-B emulator shall format the next HS-PDSCH transmission with the transport block size and the modulation scheme that were previously used. ****Note 4 For multi-carrier reception, it refers to the interference power on each carrier. |
Table 9.14-1: Performance requirements for variable reference channel, 1.1 Mbps UE class
Test Number |
Propagation conditions |
|
R (Throughput) [kbps](Note2) |
1 |
PA3 |
15 |
318 |
2 |
PB3 |
15 |
323 |
3 |
VA30 |
15 |
213 |
Note 1: For multi-carrier reception, it refers to Note 2: For multi-carrier reception, R refers to throughput on each carrier. |
9.2.2.3 Category 7, 1.6Mbps UE class
For the parameters specified in Table 9.13-2 the measured throughput R shall exceed the throughput specified in Table 9.14-2 for each radio condition.
Table 9.13-2: Test parameters for variable reference channel, 1.6Mbps UE class
Parameter |
Unit |
Test 1 |
Test 2 |
Test 3 |
HS-PDSCH Modulation and TBS |
– |
* |
||
Scrambling code and basic midamble code Number ** |
– |
1 |
||
Number of TS |
– |
3 |
||
Number of DPCHo |
– |
0 |
||
Number of HARQ Process |
– |
4 |
||
Number of transmission |
– |
1 |
||
Redundancy and constellation version coding sequence |
Xrv |
0 |
||
HS-PDSCH Channelization Codes** |
C(k,Q) |
C(i,16) 1i10 |
||
HS-PDSCHi_Ec/Ior |
dB |
-10 |
||
Ioc**** |
dBm |
-60 |
||
* Note 1 As requested by the last received CQI report **Note 2 Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. ***Note 3 If the indicated CQI is 0, the Node-B emulator shall format the next HS-PDSCH transmission with the transport block size and the modulation scheme that were previously used. ****Note 4 For multi-carrier reception, it refers to the interference power on each carrier. |
Table 9.14-2: Performance requirements for variable reference channel, 1.6Mbps UE class
Test Number |
Propagation conditions |
|
R (Throughput) [kbps](Note2) |
1 |
PA3 |
15 |
480 |
2 |
PB3 |
15 |
483 |
3 |
VA30 |
15 |
323 |
Note 1: For multi-carrier reception, it refers to Note 2: For multi-carrier reception, R refers to throughput on each carrier. |
9.2.2.4 Category 10, 2.2 Mbps UE class
For the parameters specified in Table 9.13-3 the measured throughput R shall exceed the throughput specified in Table 9.14-3 for each radio condition.
Table 9.13-3: Test parameters for variable reference channel, 2.2Mbps UE class
Parameter |
Unit |
Test 1 |
Test 2 |
Test 3 |
HS-PDSCH Modulation and TBS |
– |
* |
||
Scrambling code and basic midamble code Number ** |
– |
1 |
||
Number of TS |
– |
4 |
||
Number of DPCHo |
– |
0 |
||
Number of HARQ Process |
– |
4 |
||
Number of transmission |
– |
1 |
||
Redundancy and constellation version coding sequence |
Xrv |
0 |
||
HS-PDSCH Channelization Codes** |
C(k,Q) |
C(i,16) 1i10 |
||
HS-PDSCHi_Ec/Ior |
dB |
-10 |
||
Ioc**** |
dBm |
-60 |
||
* Note 1 As requested by the last received CQI report **Note 2 Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. ***Note 3 If the indicated CQI is 0, the Node-B emulator shall format the next HS-PDSCH transmission with the transport block size and the modulation scheme that were previously used. ****Note 4 For multi-carrier reception, it refers to the interference power on each carrier. |
Table 9.14-3: Performance requirements for variable reference channel, 2.2Mbps UE class
Test Number |
Propagation conditions |
|
R (Throughput) [kbps](Note2) |
1 |
PA3 |
15 |
625 |
2 |
PB3 |
15 |
631 |
3 |
VA30 |
15 |
418 |
Note 1: For multi-carrier reception, it refers to Note 2: For multi-carrier reception, R refers to throughput on each carrier. |
9.2.2.5 Category 13, 2.8 Mbps UE class
For the parameters specified in Table 9.13-4 the measured throughput R shall exceed the throughput specified in Table 9.14-4 for each radio condition.
Table 9.13-4: Test parameters for variable reference channel, 2.8Mbps UE class
Parameter |
Unit |
Test 1 |
Test 2 |
Test 3 |
HS-PDSCH Modulation and TBS |
– |
* |
||
Scrambling code and basic midamble code Number ** |
– |
1 |
||
Number of TS |
– |
5 |
||
Number of DPCHo |
– |
0 |
||
Number of HARQ Process |
– |
4 |
||
Number of transmission |
– |
1 |
||
Redundancy and constellation version coding sequence |
Xrv |
0 |
||
HS-PDSCH Channelization Codes** |
C(k,Q) |
C(i,16) 1i10 |
||
HS-PDSCHi_Ec/Ior |
dB |
-10 |
||
Ioc**** |
dBm |
-60 |
||
* Note 1 As requested by the last received CQI report **Note 2 Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. ***Note 3 If the indicated CQI is 0, the Node-B emulator shall format the next HS-PDSCH transmission with the transport block size and the modulation scheme that were previously used. ****Note 4 For multi-carrier reception, it refers to the interference power on each carrier. |
Table 9.14-4: Performance requirements for variable reference channel, 2.8 Mbps UE class
Test Number |
Propagation conditions |
|
R (Throughput) [kbps](Note2) |
1 |
PA3 |
15 |
783 |
2 |
PB3 |
15 |
792 |
3 |
VA30 |
15 |
544 |
Note 1: For multi-carrier reception, it refers to Note 2: For multi-carrier reception, R refers to throughput on each carrier. |