8.7 Demodulation of DCH in moving conditions
25.1023GPPRelease 17TSUser Equipment (UE) radio transmission and reception (TDD)
The receive characteristics of the Dedicated Channel (DCH) in dynamic moving propagation conditions are determined by the Block Error Ratio (BLER) values. BLER is measured for the each of the individual data rate specified for the DPCH. DCH is mapped into Dedicated Physical Channel (DPCH).
8.7.1 Minimum requirement
8.7.1.1 3.84 Mcps TDD Option
Void
8.7.1.2 1.28 Mcps TDD Option
For the parameters specified in Table 8.17 the BLER should not exceed the piece-wise linear BLER curve specified in Table 8.18.
Table 8.17: DCH parameters in moving propagation conditions (1.28 Mcps TDD Option)
Parameters |
Unit |
Test 1 |
Test 2 |
Number of DPCHo |
8 |
2 |
|
Scrambling code and basic midamble code number* |
0 |
0 |
|
DPCH Channelization Codes* |
C(k,Q) |
C(i,16) i=1,2 |
C(i,16) i=1…8 |
DPCHo Channelization Codes* |
C(k,Q) |
C(i,16) 3≤ i ≤10 |
C(i,16) 9≤ i ≤10 |
|
dB |
-10 |
-10 |
Ioc |
DBm/1.28MHz |
-60 |
|
Information Data Rate |
Kbps |
12.2 |
64 |
*Note: Refer to TS 25.223 for definition of channelization codes, scrambling code and basic midamble code. |
Table 8.18: Performance requirements in moving propagation conditions (1.28 Mcps TDD Option)
Test Number |
|
BLER |
1 |
7.1 |
10-2 |
2 |
6.7 |
10-2 |
8.7.1.3 7.68 Mcps TDD Option
Void