8.3A Demodulation of DCH in high speed train condition
25.1023GPPRelease 17TSUser Equipment (UE) radio transmission and reception (TDD)
8.3A.1 General
The performance requirement of DCH in high speed train conditions is determined by the maximum Block Error Ratio (BLER). The BLER is specified for each individual data rate of the DCH. DCH is mapped into the Dedicated Physical Channel (DPCH).
8.3A.2 Minimum requirement
8.3A.2.1 3.84 Mcps TDD Option
<void>
8.3A.2.2 1.28 Mcps TDD Option
For the parameters specified in Table 8.9C, the average downlink power ratio shall be below the specified BLER shown in Table 8.9D.
Table 8.9C: DCH parameters in high speed train condition
Parameters |
Unit |
Test 1 |
Test 2 |
Number of DPCHo |
8 |
2 |
|
Scrambling code and basic midamble code number* |
0 |
0 |
|
DPCH Channelization Codes* |
C(k,Q) |
C(i,16) i=1,2 |
C(i,16) i=1…8 |
DPCHo Channelization Codes* |
C(k,Q) |
C(i,16) 3≤ i ≤10 |
C(i,16) 9≤ i ≤10 |
|
dB |
-10 |
-10 |
Ioc |
dBm/1.28MHz |
-60 |
|
Information Data Rate |
Kbps |
12.2 |
64 |
*Note: Refer to TS 25.223 for definition of channelization codes and cell parameter. |
Table 8.9D: DCH requirements in high speed train condition
Test Number |
BLER |
|
1 |
8.5 |
10-2 |
2 |
6.2 |
10-1 |
8.5 |
10-2 |
8.3A.2.3 7.68 Mcps TDD Option
<void>