1 Scope2 References3 Definitions, symbols and abbreviations4 General5 Frequency bands and channel arrangement6 Transmitter characteristics6.1 General6.2 Transmit power6.3 Frequency Error6.3A Frequency Error for DC-HSUPA6.3B Frequency error for UL OLTD6.3C Frequency error for UL CLTD6.3D Frequency error for UL MIMO6.3E Frequency error for DB-DC-HSUPA6.4 Output power dynamics6.4A Output pattern dynamics6.5 Transmit ON/OFF power6.5.1 Transmit OFF power6.5.2 Transmit ON/OFF Time mask6.5.3 Change of TFC6.5.4 Power setting in uplink compressed mode6.5.5 HS-DPCCH6.6 Output RF spectrum emissions6.7 Transmit intermodulation6.8 Transmit modulation7 Receiver characteristics7.1 General7.2 Diversity characteristics7.3 Reference sensitivity level7.4 Maximum input level7.5 Adjacent Channel Selectivity (ACS)7.6 Blocking characteristics7.6.3C Additional requirement for single band 4C-HSDPA (Narrow band blocking)7.6.3E Additional requirement for single band NC-4C-HSDPA (Narrow band blocking)7.7 Spurious response7.8 Intermodulation characteristics7.9 Spurious emissions7.10 Reference input power adjustment for a dual band device8 Performance requirement8.1 General8.2 Demodulation in static propagation conditions8.3 Demodulation of DCH in multi-path fading propagation conditions8.4 Demodulation of DCH in moving propagation conditions8.5 Demodulation of DCH in birth-death propagation conditions8.5A Demodulation of DCH in high speed train condition8.6 Demodulation of DCH in downlink Transmit diversity modes8.7 Demodulation in Handover conditions8.8 Power control in downlink8.9 Downlink compressed mode8.10 Blind transport format detection8.11 Detection of Broadcast channel (BCH)8.11A Detection of Broadcast channel (BCH) mapped to S-CCPCH8.12 Demodulation of Paging Channel (PCH)8.13 Detection of Acquisition Indicator (AI)8.13A Detection of E-DCH Acquisition Indicator (E-AI)8.14 UE UL power control operation with discontinuous UL DPCCH transmission operation8.15 (void)8.16 (void)8.17 UE UL power control operation with Algorithm 39 Performance requirement (HSDPA)9 Performance requirement (HSDPA)9.1 (void)9.2 Demodulation of HS-DSCH (Fixed Reference Channel)9.2 Demodulation of HS-DSCH (Fixed Reference Channel)9.2.1 Single Link performance9.2.2 Open Loop Diversity performance9.2.3 Closed Loop Diversity Performance9.2.4 MIMO Performance9.2.4A MIMO only with single-stream restriction Performance9.2.4B Four Transmit Antennas MIMO Performance9.2.4C MIMO Mode with Four Transmit Antennas Only With Dual-stream Restriction Performance9.2.5 Multiflow HSDPA performance9.3 Reporting of Channel Quality Indicator9.3 Reporting of Channel Quality Indicator9.3.1 Single Link Performance9.3.2 Open Loop Diversity Performance9.3.3 Closed Loop Diversity Performance9.3.4 MIMO Performance9.3.5 MIMO only with single-stream restriction Performance9.3.6 Multiflow HSDPA performance9.3.7 MIMO Performance with four transmit antennas9.3.8 MIMO with Four Transmit Antennas only with Dual-Stream Restriction Performance9.4 HS-SCCH Detection Performance9.5 HS-SCCH-less demodulation of HS-DSCH (Fixed Reference Channel)9.6 Requirements for HS-DSCH and HS-SCCH reception in CELL_FACH state10 Performance requirement (E-DCH)11 Performance requirement (MBMS)A.1 GeneralA.2 UL reference measurement channelA.2.1 UL reference measurement channel (12.2 kbps)A.2.2 UL reference measurement channel (64 kbps)A.2.3 UL reference measurement channel (144 kbps)A.2.4 UL reference measurement channel (384 kbps)A.2.5 UL reference measurement channel (768 kbps)A.2.5A UL reference measurement channel (768 kbps)A.2.6 UL E-DCH reference measurement channel for DC-HSUPA using BPSK modulationA.2.7 UL E-DCH reference measurement channel for DC-HSUPA using 16QAM modulationA.2.8 Combinations of UL E-DCH reference measurement channel for DC-HSUPA testsA.3 DL reference measurement channelA.3.0 DL reference measurement channel (0 kbps)A.3.1 DL reference measurement channel (12.2 kbps)A.3.2 DL reference measurement channel (64 kbps)A.3.3 DL reference measurement channel (144 kbps)A.3.4 DL reference measurement channel (384 kbps)A.3.5 DL reference measurement channel 2 (64 kbps)A.3A DL reference measurement channelA.4 DL reference measurement channel for BTFD performance requirementsA.4A Reference parameters for discontinuous UL DPCCH transmissionA.5 DL reference compressed mode parametersA.6 DL reference parameters for PCH testsA.7 DL reference channel parameters for HSDPA testsA.8 DL reference parameters for MBMS testsA.9 DL reference parameters for combined MTCH demodulation and cell identificationB.1 (void)B.2 Propagation ConditionsC.1 GeneralC.2 Connection Set-upC.3 During connectionC.4 W-CDMA Modulated InterfererC.5 HSDPA DL Physical channelsC.6 MBMS DL Physical channelsD.1 GeneralD.2 Environmental requirementsE.1 GeneralE.2 List of UARFCN used for UTRA FDD bands B.1 (void) 25.1013GPPRelease 17TSUser Equipment (UE) radio transmission and reception (FDD) Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM