A.2.6 UL E-DCH reference measurement channel for DC-HSUPA using BPSK modulation

25.1013GPPRelease 17TSUser Equipment (UE) radio transmission and reception (FDD)

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

The parameters for the UL measurement channel for UE transmitter characteristics for DC-HSUPA are specified in Table A.10AA and Figure A.4AA. The power imbalance in Table A.10AA refers to the ratio of the DPCCH power of the primary uplink frequency to the DPCCH power of the secondary uplink frequency, expressed in dB.

Table A.10AA: Settings for DC-HSUPA reference measurement channel using BPSK modulation

Parameter	Unit	Value
Modulation		BPSK
Maximum. Inf. Bit Rate	kbps	60
TTI	ms	2
Number of HARQ Processes	Processes	8
Information Bit Payload (N_INF)	Bits	120
Binary Channel Bits per TTI (N_BIN) (3840 / SF x TTI sum for all channels)	Bits	480
Coding Rate (N_INF/ N_BIN)		0.25
Physical Channel Codes	SF for each physical channel	{16}
E-DPDCH/DPCCH power ratio E-DPCCH/DPCCH power ratio HS-DPCCH/DPCCH power ratio	dB dB dB	4.08 -9.54 -9.54
Power imbalance	dB	0
Note: HS-DPCCH is applicable only for the primary uplink frequency.

Figure A.4AA: E-DPDCH coding rate for DC-HSUPA reference measurement channel using BPSK modulation