A.2.8 Combinations of UL E-DCH reference measurement channel for DC-HSUPA tests
25.1013GPPRelease 17TSUser Equipment (UE) radio transmission and reception (FDD)
The combinations of BPSK and 16QAM reference measurement channels in Table A.10AC shall be used for verifying the UE maximum output power for DC-HSUPA, additional Spectrum emission mask for DC-HSUPA, and additional ACLR requirement for DC-HSUPA. The entry BPSK in Table A.10AC refers to the UL E-DCH reference measurement channel for DC-HSUPA using BPSK modulation, specified in subclause A.2.6, and the entry 16QAM refers to the UL E-DCH reference measurement channel for DC-HSUPA using 16QAM modulation, specified in subclause A.2.7. The power imbalance in subclause A.2.6 and A.2.7 have been adjusted as shown in Table A.10AC.
Table A.10AC: Settings for DC-HSUPA reference measurement channels for UE maximum output power, spectrum emission mask and ACLR requirements
|
Config # |
Primary carrier |
Secondary carrier |
Power imbalance [dB] |
Allowed MPR [dB] |
|
1 |
BPSK |
BPSK |
-10 |
[0.5] |
|
2 |
BPSK |
BPSK |
8 |
[1.0] |
|
3 |
BPSK |
BPSK |
0 |
[1.5] |
|
4 |
16QAM |
16QAM |
0 |
[TBD] |