A.7 DL reference channel parameters for HSDPA tests
25.1013GPPRelease 17TSUser Equipment (UE) radio transmission and reception (FDD)
A.7.1 Fixed Reference Channel (FRC)
A.7.1.1 Fixed Reference Channel Definition H-Set 1/1A/1B/1C/1E
Table A.25: Fixed Reference Channel H-Set 1/1A/1B/1C/1E
|
Parameter |
Unit |
Value |
|
|
Nominal Avg. Inf. Bit Rate |
kbps |
534 |
777 |
|
Inter-TTI Distance |
TTI’s |
3 |
3 |
|
Number of HARQ Processes |
Processes |
2 |
2 |
|
Information Bit Payload ( |
Bits |
3202 |
4664 |
|
Number Code Blocks |
Blocks |
1 |
1 |
|
Binary Channel Bits Per TTI |
Bits |
4800 |
7680 |
|
Total Available SML’s in UE |
SML’s |
19200 |
19200 |
|
Number of SML’s per HARQ Proc. |
SML’s |
9600 |
9600 |
|
Coding Rate |
0.67 |
0.61 |
|
|
Number of Physical Channel Codes |
Codes |
5 |
4 |
|
Modulation |
QPSK |
16QAM |
|
|
Note: The HS-DSCH shall be transmitted continuously with constant power but only every third TTI shall be allocated to the UE under test. The values in the table defines H-Set 1. H-Set 1A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 1 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 1B and H-Set 1C for 4C-HSDPA are formed by applying H-Set 1 to each of the carriers available in 4C-HSDPA mode (3 carriers for H-Set 1B and 4 carriers for H-Set 1C). H-Set 1E for 8C-HSDPA is formed by applying H-Set 1 to each of the carriers available in 8C-HSDPA mode. |
|||
)
Figure A.12: Coding rate for Fixed reference Channel H-Set 1 (QPSK)
Figure A.13: Coding rate for Fixed reference Channel H-Set 1 (16 QAM)
A.7.1.2 Fixed Reference Channel Definition H-Set 2
Table A.26: Fixed Reference Channel H-Set 2
|
Parameter |
Unit |
Value |
|
|
Nominal Avg. Inf. Bit Rate |
kbps |
801 |
1166 |
|
Inter-TTI Distance |
TTI’s |
2 |
2 |
|
Number of HARQ Processes |
Processes |
3 |
3 |
|
Information Bit Payload ( |
Bits |
3202 |
4664 |
|
Number Code Blocks |
Blocks |
1 |
1 |
|
Binary Channel Bits Per TTI |
Bits |
4800 |
7680 |
|
Total Available SML’s in UE |
SML’s |
28800 |
28800 |
|
Number of SML’s per HARQ Proc. |
SML’s |
9600 |
9600 |
|
Coding Rate |
0.67 |
0.61 |
|
|
Number of Physical Channel Codes |
Codes |
5 |
4 |
|
Modulation |
QPSK |
16QAM |
|
|
Note: The HS-DSCH shall be transmitted continuously with constant power but only every second TTI shall be allocated to the UE under test. |
|||
)
Figure A.14: Coding rate for Fixed Reference Channel H-Set 2 (QPSK)
Figure A.15: Coding rate for Fixed Reference Channel H-Set 2 (16QAM)
A.7.1.3 Fixed Reference Channel Definition H-Set 3/3A/3B/3C/3E
Table A.27: Fixed Reference Channel H-Set 3/3A/3B/3C/3E
|
Parameter |
Unit |
Value |
|
|
Nominal Avg. Inf. Bit Rate |
kbps |
1601 |
2332 |
|
Inter-TTI Distance |
TTI’s |
1 |
1 |
|
Number of HARQ Processes |
Processes |
6 |
6 |
|
Information Bit Payload ( |
Bits |
3202 |
4664 |
|
Number Code Blocks |
Blocks |
1 |
1 |
|
Binary Channel Bits Per TTI |
Bits |
4800 |
7680 |
|
Total Available SML’s,in UE |
SML’s |
57600 |
57600 |
|
Number of SML’s per HARQ Proc. |
SML’s |
9600 |
9600 |
|
Coding Rate |
0.67 |
0.61 |
|
|
Number of Physical Channel Codes |
Codes |
5 |
4 |
|
Modulation |
QPSK |
16QAM |
|
|
Note: The values in the table define H-Set 3. H-Set 3A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 3 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 3B and H-Set 3C for4C-HSDPA are formed by applying H-Set 3 to each of the carriers available in 4C-HSDPA mode (3 carriers for H-Set 3B and 4 carriers for H-Set 3C). H-Set 3E for 8C-HSDPA is formed by applying H-Set 3 to each of the carriers available in 8C-HSDPA mode. |
|||
)
Figure A.16: Coding rate for Fixed reference Channel H-Set 3 (QPSK)
Figure A.17: Coding rate for Fixed reference Channel H-Set 3 (16QAM)
A.7.1.4 Fixed Reference Channel Definition H-Set 4
Table A.28: Fixed Reference Channel H-Set 4
|
Parameter |
Unit |
Value |
|||
|
Nominal Avg. Inf. Bit Rate |
kbps |
534 |
|||
|
Inter-TTI Distance |
TTI’s |
2 |
|||
|
Number of HARQ Processes |
Processes |
2 |
|||
|
Information Bit Payload ( |
Bits |
3202 |
|||
|
Number Code Blocks |
Blocks |
1 |
|||
|
Binary Channel Bits Per TTI |
Bits |
4800 |
|||
|
Total Available SML’s in UE |
SML’s |
14400 |
|||
|
Number of SML’s per HARQ Proc. |
SML’s |
7200 |
|||
|
Coding Rate |
0.67 |
||||
|
Number of Physical Channel Codes |
Codes |
5 |
|||
|
Modulation |
QPSK |
||||
|
Note: This FRC is used to verify the minimum inter-TTI distance for UE category 11. The HS-PDSCH shall be transmitted continuously with constant power. The six sub-frame HS-SCCH signalling pattern shall repeat as follows: |
|||||
)
Figure A.18: Coding rate for Fixed Reference Channel H-Set 4
A.7.1.5 Fixed Reference Channel Definition H-Set 5
Table A.29: Fixed Reference Channel H-Set 5
|
Parameter |
Unit |
Value |
|||
|
Nominal Avg. Inf. Bit Rate |
kbps |
801 |
|||
|
Inter-TTI Distance |
TTI’s |
1 |
|||
|
Number of HARQ Processes |
Processes |
3 |
|||
|
Information Bit Payload ( |
Bits |
3202 |
|||
|
Number Code Blocks |
Blocks |
1 |
|||
|
Binary Channel Bits Per TTI |
Bits |
4800 |
|||
|
Total Available SML’s in UE |
SML’s |
28800 |
|||
|
Number of SML’s per HARQ Proc. |
SML’s |
9600 |
|||
|
Coding Rate |
0.67 |
||||
|
Number of Physical Channel Codes |
Codes |
5 |
|||
|
Modulation |
QPSK |
||||
|
Note: This FRC is used to verify the minimum inter-TTI distance for UE category 12. The HS-PDSCH shall be transmitted continuously with constant power. The six sub-frame HS-SCCH signalling pattern shall repeat as follows: |
|||||
)
Figure A.19: Coding rate for Fixed Reference Channel H-Set 5
A.7.1.6 Fixed Reference Channel Definition H-Set 6/6A/6B/6C/6E
Table A.29A: Fixed Reference Channel H-Set 6/6A/6B/6C/6E
|
Parameter |
Unit |
Value |
|
|
Nominal Avg. Inf. Bit Rate |
kbps |
3219 |
4689 |
|
Inter-TTI Distance |
TTI’s |
1 |
1 |
|
Number of HARQ Processes |
Processes |
6 |
6 |
|
Information Bit Payload ( |
Bits |
6438 |
9377 |
|
Number Code Blocks |
Blocks |
2 |
2 |
|
Binary Channel Bits Per TTI |
Bits |
9600 |
15360 |
|
Total Available SML’s in UE |
SML’s |
115200 |
115200 |
|
Number of SML’s per HARQ Proc. |
SML’s |
19200 |
19200 |
|
Coding Rate |
0.67 |
0.61 |
|
|
Number of Physical Channel Codes |
Codes |
10 |
8 |
|
Modulation |
QPSK |
16QAM |
|
|
Note: The values in the table define H-Set 6. H-Set 6A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 6 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 6B and H-Set 6C for 4C-HSDPA are formed by applying H-Set 6 to each of the carriers available in 4C-HSDPA mode (3 carriers for H-Set 6B and 4 carriers for H-Set 6C). H-Set 6E for 8C-HSDPA is formed by applying H-Set 6 to each of the carriers available in 8C-HSDPA mode. |
|||
)
Figure A.20: Coding rate for Fixed reference Channel H-Set 6 (QPSK)
Figure A.21: Coding rate for Fixed reference Channel H-Set 6 (16 QAM)
A.7.1.7 Fixed Reference Channel Definition H-Set 7
Table A.29B: Fixed Reference Channel H-Set 7
|
Parameter |
Unit |
Value |
|
Nominal Avg. Inf. Bit Rate |
kbps |
37.8 |
|
Inter-TTI Distance |
TTI’s |
8 |
|
Information Bit Payload ( |
Bits |
605 |
|
Number Code Blocks |
Blocks |
1 |
|
Binary Channel Bits Per TTI |
Bits |
960 |
|
Coding Rate |
0.66 |
|
|
Number of Physical Channel Codes |
Codes |
1 |
|
Modulation |
QPSK |
|
|
Note: This FRC is used to verify CPC operation. The HS-DSCH shall be transmitted continuously with constant power but only every 8th TTI shall be allocated to the UE under test. |
||
)
Figure A.22: Coding rate for Fixed Reference Channel H-Set 7 (QPSK)
A.7.1.8 Fixed Reference Channel Definition H-Set 8/8A/8B/8C/8E
Table A.29C: Fixed Reference Channel H-Set 8/8A/8B/8C/8E
|
Parameter |
Unit |
Value |
|
|
Nominal Avg. Inf. Bit Rate |
kbps |
13252 |
|
|
Inter-TTI Distance |
TTI’s |
1 |
|
|
Number of HARQ Processes |
Processes |
6 |
|
|
Information Bit Payload ( |
Bits |
26504 |
|
|
Number Code Blocks |
Blocks |
6 |
|
|
Binary Channel Bits Per TTI |
Bits |
43200 |
|
|
Total Available SML’s in UE |
SML’s |
259200 |
264000 |
|
Number of SML’s per HARQ Proc. |
SML’s |
43200 |
44000 |
|
Coding Rate |
0.61 |
0.60 |
|
|
Number of Physical Channel Codes |
Codes |
15 |
|
|
Modulation |
64QAM |
||
|
Note 1: The values in the table define H-Set 8. H-Set 8A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 8 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 8B and H-Set 8C for 4C-HSDPA are formed by applying H-Set 8 to each of the carriers available in 4C-HSDPA mode (3 carriers for H-Set 8B and 4 carriers for H-Set 8C). H-Set 8E for 8C-HSDPA is formed by applying H-Set 8 to each of the carriers available in 8C-HSDPA mode. Note 2: For H-Set 8, if “Total number of soft channel bits” as per HS-DSCH categories is equal to 259200, set “Number of SML’s per HARQ Proc.” as 43200 using an implicit UE IR Buffer Size Allocation. Note 3: For H-Set 8A/8B/8C/8E, set “Number of SML’s per HARQ Proc.” as 43200 using an implicit UE IR Buffer Size Allocation. |
|||
)
Figure A.23: Coding rate for Fixed reference Channel H-Set 8 (64 QAM)
A.7.1.9 Fixed Reference Channel Definition H-Set 9/9A/9B/9C/9E
Table A.29D: Fixed Reference Channel H-Set 9/9A/9B/9C/9E
|
Parameter |
Unit |
Value |
|
|
Transport block |
Primary |
Secondary |
|
|
Combined Nominal Avg. Inf. Bit Rate |
13652 |
||
|
Nominal Avg. Inf. Bit Rate |
kbps |
8784 |
4868 |
|
Inter-TTI Distance |
TTI’s |
1 |
1 |
|
Number of HARQ Processes |
Processes |
6 |
6 |
|
Information Bit Payload ( |
Bits |
17568 |
9736 |
|
Number Code Blocks |
Blocks |
4 |
2 |
|
Binary Channel Bits Per TTI |
Bits |
28800 |
14400 |
|
Total available SML’s in UE |
Bits |
345600 |
|
|
Number of SML’s per HARQ Proc. |
SML’s |
28800 |
28800 |
|
Coding Rate |
0.61 |
0.68 |
|
|
Number of Physical Channel Codes |
Codes |
15 |
15 |
|
Modulation |
16QAM |
QPSK |
|
|
Note: The values in the table define H-Set 9. H-Set 9A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 9 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 9B and H-Set 9C for 4C-HSDPA are formed by applying H-Set 9 to each of the carriers available in 4C-HSDPA mode (3 carriers for H-Set 9B and 4 carriers for H-Set 9C). H-Set 9E for 8C-HSDPA is formed by applying H-Set 9 to each of the carriers available in 8C-HSDPA mode. |
|||
)4800
9600
12
9693
Inf
.
Bit Payload
CRC Addition
Turbo
–
Encoding
(
R
=
1
/
3
)
17568
Code Block
Segmentation
1
st Rate Matching
7200
Tail Bits
12
13194
4398
CRC
24
17568
RV Selection
7200
Physical Channel
Segmentation
1920
Figure A.24: Coding rate for Fixed Reference Channel H-Set 9 Primary Transport Block
Figure A.25: Coding rate for Fixed Reference Channel H-Set 9 Secondary Transport Block
A.7.1.10 Fixed Reference Channel Definition H-Set 10/10A/10B/10C/10E
Table A.29E: Fixed Reference Channel H-Set 10/10A/10B/10C/10E
|
Parameter |
Unit |
Value |
|
|
Nominal Avg. Inf. Bit Rate |
Kbps |
8774 |
4860 |
|
Inter-TTI Distance |
TTI’s |
1 |
1 |
|
Number of HARQ Processes |
Processes |
6 |
6 |
|
Information Bit Payload |
Bits |
17548 |
9719 |
|
Number Code Blocks |
Blocks |
4 |
2 |
|
Binary Channel Bits Per TTI |
Bits |
28800 |
14400 |
|
Number of SML’s per HARQ Proc. |
SML’s |
28800 |
28800 |
|
Coding Rate |
0.6 |
0.67 |
|
|
Number of Physical Channel Codes |
Codes |
15 |
15 |
|
Modulation |
16QAM |
QPSK |
|
|
Note: The values in the table define H-Set 10. H-Set 10A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 10 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 10B and H-Set 10C for 4C-HSDPA are formed by applying H-Set 10 to each of the carriers available in 4C-HSDPA mode (3 carriers for H-Set 10B and 4 carriers for H-Set 10C). H-Set 10E for 8C-HSDPA is formed by applying H-Set 10 to each of the carriers available in 8C-HSDPA mode. |
|||
Figure A.24: Coding rate for Fixed Reference Channel H-Set 10 (16QAM)
Figure A.25: Coding rate for Fixed Reference Channel H-Set 10 (QPSK)
A.7.1.11 Fixed Reference Channel Definition H-Set 11/11A/11B/11C/11E
Table A.29F: Fixed Reference Channel H-Set 11/11A/11B/11C/11E
|
Parameter |
Unit |
Value |
|
|
Transport block |
Primary |
Secondary |
|
|
Combined Nominal Avg. Inf. Bit Rate |
22074 |
||
|
Nominal Avg. Inf. Bit Rate |
kbps |
13300 |
8774 |
|
Inter-TTI Distance |
TTI’s |
1 |
1 |
|
Number of HARQ Processes |
Processes |
6 |
6 |
|
Information Bit Payload ( |
Bits |
26504 |
17568 |
|
Number Code Blocks |
Blocks |
6 |
4 |
|
Binary Channel Bits Per TTI |
Bits |
43200 |
28800 |
|
Total available SML’s in UE |
Bits |
518400 |
|
|
Number of SML’s per HARQ Proc. |
SML’s |
43200 |
43200 |
|
Coding Rate |
0.61 |
0.6 |
|
|
Number of Physical Channel Codes |
Codes |
15 |
15 |
|
Modulation |
64QAM |
16QAM |
|
|
Note: The values in the table define H-Set 11. H-Set 11A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 11 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 11B and H-Set 11C for 4C-HSDPA are formed by applying H-Set 11 and H-Set 11C to each of the carriers available in 4C-HSDPA mode (3 carriers for H-Set 11B and 4 carriers for H-Set 11C). H-Set 11E for 8C-HSDPA is formed by applying H-Set 11 to each of the carriers available in 8C-HSDPA mode. |
|||
)4800
9600
9693
Inf
.
Bit Payload
CRC Addition
Turbo
–
Encoding
(
R
=
1
/
3
)
26504
Code Block
Segmentation
1
st Rate Matching
7200
Tail Bits
12
13266
4422
CRC
24
26504
RV Selection
7200
Physical Channel
Segmentation
2880
Figure A.26: Coding rate for Fixed Reference Channel H-Set 11 Primary Transport Block
4800
9600
9693
Inf
.
Bit Payload
CRC Addition
Turbo
–
Encoding
(
R
=
1
/
3
)
17568
Code Block
Segmentation
1
st Rate Matching
7200
Tail Bits
12
13194
4398
CRC
24
17568
RV Selection
7200
Physical Channel
Segmentation
1920
Figure A.27: Coding rate for Fixed Reference Channel H-Set 11 Secondary Transport Block
A.7.1.12 Fixed Reference Channel Definition H-Set 12
Table A.29G: Fixed Reference Channel H-Set 12
|
Parameter |
Unit |
Value |
|
Nominal Avg. Inf. Bit Rate |
kbps |
60 |
|
Inter-TTI Distance |
TTI’s |
1 |
|
Number of HARQ Processes |
Processes |
6 |
|
Information Bit Payload ( |
Bits |
120 |
|
Number Code Blocks |
Blocks |
1 |
|
Binary Channel Bits Per TTI |
Bits |
960 |
|
Total Available SML’s in UE |
SML’s |
19200 |
|
Number of SML’s per HARQ Proc. |
SML’s |
3200 |
|
Coding Rate |
0.15 |
|
|
Number of Physical Channel Codes |
Codes |
1 |
|
Modulation |
QPSK |
|
|
Note 1: The RMC is intended to be used for DC-HSDPA mode and both cells shall transmit with identical parameters as listed in the table. Note 2: Maximum number of transmission is limited to 1, i.e., retransmission is not allowed. The redundancy and constellation version 0 shall be used. |
||
)
Figure A.28: Coding rate for Fixed reference Channel H-Set 12 (QPSK)
A.7.1.13 Fixed Reference Channel Definition H-Set 13/13A/13C
Table A.29H: Fixed Reference Channel H-Set 13/13A/13C
|
Parameter |
Unit |
Value |
|||
|
Transport block |
Primary |
Second |
Third |
Fourth |
|
|
Combined Nominal Avg. Inf. Bit Rate |
27304 |
||||
|
Nominal Avg. Inf. Bit Rate |
Kbps |
8784 |
4868 |
4868 |
8784 |
|
Inter-TTI Distance |
TTI’s |
1 |
1 |
1 |
1 |
|
Number of HARQ Processes |
Processes |
6 |
6 |
6 |
6 |
|
Information Bit Payload ( |
Bits |
17568 |
9736 |
9736 |
17568 |
|
Number Code Blocks |
Blocks |
4 |
2 |
2 |
4 |
|
Binary Channel Bits Per TTI |
Bits |
28800 |
14400 |
14400 |
28800 |
|
Total available SML’s in UE |
Bits |
1036800 |
|||
|
Number of SML’s per HARQ Proc. |
SML’s |
43200 |
43200 |
43200 |
43200 |
|
Coding Rate |
0.61 |
0.68 |
0.68 |
0.61 |
|
|
Number of Physical Channel Codes |
Codes |
15 |
15 |
15 |
15 |
|
Modulation |
16QAM |
QPSK |
QPSK |
16QAM |
|
|
Note: The values in the table define H-Set 13. H-Set 13A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 13 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 13C for 4C-HSDPA are formed by applying H-Set 13 to each of the carriers available in 4C-HSDPA mode. |
|||||
)
Figure A.29: Coding rate for Fixed Reference Channel H-Set 13 Primary and Fourth Transport Block
Figure A.30: Coding rate for Fixed Reference Channel H-Set 13 Secondary and Third Transport Block
A.7.1.14 Fixed Reference Channel Definition H-Set 14/14A/14C
Table A.29I: Fixed Reference Channel H-Set 14/14A/14C
|
Parameter |
Unit |
Value |
|||
|
Transport block |
Primary |
Second |
Third |
Fourth |
|
|
Combined Nominal Avg. Inf. Bit Rate |
44148 |
||||
|
Nominal Avg. Inf. Bit Rate |
Kbps |
13300 |
8774 |
8774 |
13300 |
|
Inter-TTI Distance |
TTI’s |
1 |
1 |
1 |
1 |
|
Number of HARQ Processes |
Processes |
6 |
6 |
6 |
6 |
|
Information Bit Payload ( |
Bits |
26504 |
17568 |
17568 |
26504 |
|
Number Code Blocks |
Blocks |
6 |
4 |
4 |
6 |
|
Binary Channel Bits Per TTI |
Bits |
43200 |
28800 |
28800 |
43200 |
|
Total available SML’s in UE |
Bits |
1036800 |
|||
|
Number of SML’s per HARQ Proc. |
SML’s |
43200 |
43200 |
43200 |
43200 |
|
Coding Rate |
0.61 |
0.6 |
0.6 |
0.61 |
|
|
Number of Physical Channel Codes |
Codes |
15 |
15 |
15 |
15 |
|
Modulation |
64QAM |
16QAM |
16QAM |
64QAM |
|
|
Note: The values in the table define H-Set 14. H-Set 14A for DC-HSDPA and DB-DC-HSDPA is formed by applying H-Set 14 to each of the carriers available in DC-HSDPA and DB-DC-HSDPA mode. H-Set 14C for 4C-HSDPA are formed by applying H-Set 14 to each of the carriers available in 4C-HSDPA mode. |
|||||
)
Figure A.31: Coding rate for Fixed Reference Channel H-Set 14 Primary and Fourth Transport Block
Figure A.32: Coding rate for Fixed Reference Channel H-Set 14 Secondary and Third Transport Block