A.4 DL reference measurement channel for BTFD performance requirements
25.1013GPPRelease 17TSUser Equipment (UE) radio transmission and reception (FDD)
The parameters for DL reference measurement channel for BTFD are specified in Table A.19 and Table A.20. The channel coding for information is shown in figures A.9, A.10, and A11.
Table A.19: DL reference measurement channel physical parameters for BTFD
Parameter |
Unit |
Rate 1 |
Rate 2 |
Rate 3 |
Information bit rate |
kbps |
12.2 |
7.95 |
1.95 |
DPCH |
ksps |
30 |
||
Slot Format # i |
– |
8 |
||
TFCI |
– |
Off |
||
Power offsets PO1, PO2 and PO3 |
dB |
0 |
||
Repetition |
% |
5 |
Table A.20: DL reference measurement channel, transport channel parameters for BTFD
Parameter |
DTCH |
DCCH |
||
Rate 1 |
Rate 2 |
Rate 3 |
||
Transport Channel Number |
1 |
2 |
||
Transport Block Size |
244 |
159 |
39 |
100 |
Transport Block Set Size |
244 |
159 |
39 |
100 |
Transmission Time Interval |
20 ms |
40 ms |
||
Type of Error Protection |
Convolution Coding |
Convolution Coding |
||
Coding Rate |
1/3 |
1/3 |
||
Rate Matching attribute |
256 |
256 |
||
Size of CRC |
12 |
12 |
||
Position of TrCH in radio frame |
fixed |
fixed |
Figure A.9 (Informative): Channel coding of DL reference measurement channel for BTFD (Rate 1)
Figure A.10 (Informative): Channel coding of DL reference measurement channel for BTFD (Rate 2)
Figure A.11 (Informative): Channel coding of DL reference measurement channel for BTFD (Rate 3)