A.2.7 UL E-DCH reference measurement channel for DC-HSUPA using 16QAM modulation
25.1013GPPRelease 17TSUser Equipment (UE) radio transmission and reception (FDD)
The parameters for the UL measurement channel for UE transmitter characteristics for DC-HSUPA using 16QAM modulation are specified in Table A.10AB and Figure A.4AB. The power imbalance in Table A.11 refers to the ratio of the DPCCH power of the primary uplink frequency to the DPCCH power of the secondary uplink frequency, expressed in dB.
Table A.10AB: Settings for DC-HSUPA reference measurement channel using 16QAM modulation
Parameter |
Unit |
Value |
Modulation |
16QAM |
|
Maximum. Inf. Bit Rate |
Kbps |
4227.0 |
TTI |
ms |
2 |
Number of HARQ Processes |
Processes |
8 |
Information Bit Payload (NINF) |
Bits |
8454 |
Binary Channel Bits per TTI (NBIN) |
Bits |
23040 |
Coding Rate (NINF/ NBIN) |
0.367 |
|
Physical Channel Codes |
SF for each physical channel |
{2,2,4,4} |
E-DPDCH/DPCCH power ratio, SF4 codes HS-DPCCH/DPCCH power ratio |
dB dB |
16.03 2.05 |
Power imbalance |
dB |
0 |
Note: HS-DPCCH is applicable only for the primary uplink frequency. |
Figure A.4AB: E-DPDCH coding rate for DC-HSUPA reference measurement channel using 16QAM modulation