8.4 Demodulation of DCH in moving propagation conditions
25.1013GPPRelease 17TSUser Equipment (UE) radio transmission and reception (FDD)
8.4.1 Single link performance
The receive single link performance of the Dedicated Channel (DCH) in dynamic moving propagation conditions are determined by the Block Error Ratio (BLER) values. BLER is measured for the each of the individual data rate specified for the DPCH. DCH is mapped into Dedicated Physical Channel (DPCH).
8.4.1.1 Minimum requirement
For the parameters specified in Table 8.15 the average downlink 
power ratio shall be below the specified value for the BLER shown in Table 8.16.
Table 8.15: DCH parameters in moving propagation conditions
|
Parameter |
Unit |
Test 1 |
Test 2 |
|||
|
Phase reference |
P-CPICH |
|||||
|
|
dB |
-1 |
||||
|
|
dBm/3.84 MHz |
-60 |
||||
|
Information Data Rate |
kbps |
12.2 |
64 |
|||
Table 8.16: DCH requirements in moving propagation conditions
|
Test Number |
|
BLER |
|
1 |
-14.5 dB |
10-2 |
|
2 |
-10.9 dB |
10-2 |
