8.13A Detection of E-DCH Acquisition Indicator (E-AI)
25.1013GPPRelease 17TSUser Equipment (UE) radio transmission and reception (FDD)
The receiver characteristics of E-DCH Acquisition Indicator (E-AI) are determined by the probability of correct detection Pde. Pde is defined as a conditional probability of correct detection of E-AI signature given that the E-AI signature is transmitted and AI signature was correctly received.
8.13A.1 Minimum requirement
For the parameters specified in Table 8.45C the 1-Pde shall not exceed the specified value in Table 8.45D. The power settings for downlink channels other than AICH and E-AICH are set as defined in Table C.3 of Annex C.
Table 8.45C: Parameters for E-AI detection
Parameter |
Unit |
Test 1 |
||
Phase reference |
– |
P-CPICH |
||
|
dBm/3.84 MHz |
-60 |
||
Number of other transmitted AI signatures on AICH |
– |
0 |
||
Number of resources assumed for E-DCH random access |
– |
32 |
||
|
dB |
-1 |
||
AICH_Ec/Ior |
dB |
-22.0 |
||
AICH Power Offset |
dB |
-12.0 |
||
E-AICH_Ec/Ior |
dB |
-22.0 |
||
E-AICH Power Offset |
dB |
-12.0 |
||
Propagation condition |
– |
Static |
Note that AICH_Ec/Ior and E-AICH_Ec/Ior can not be set, their values are calculated from other parameters and are given for information only.
Table 8.45D: Test requirements for E-AI detection
Test Number |
1- Pde |
1 |
0.005 |