7.3A.4 Reference sensitivity exceptions due to UL harmonic interference for CA

38.101-13GPPNRPart 1: Range 1 StandaloneRelease 17TSUser Equipment (UE) radio transmission and reception

Sensitivity degradation is allowed for different combinations of UL configurations and DL channel bandwidths if a band in frequency range 1 is impacted by UL harmonic interference from another band which belongs to NR band in frequency range 1 of the same downlink CA configuration. Reference sensitivity exceptions and uplink/downlink configurations due to UL harmonic from a PC3 aggressor NR UL band for either single band uplink or PC3 or PC2 CA are specified in Table 7.3A.4-1. For these exceptions, only the listed test points in Table 7.3A.4-1 are needed to be tested.

Table 7.3A.4-1: Reference sensitivity exceptions and uplink/downlink configurations due to UL harmonic from a PC3 aggressor NR UL band for NR DL CA FR1

UL band

DL band

UL BW

SCS of UL band

UL RB Allocation

DL BW

MSD

UL/DL fc condition

UL/DL harmonic order

(MHz)

(kHz)

LCRB

(MHz)

(dB)

n1

n77

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n1

n77

20

15

100 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n1

n77

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n2

n48

5

15

25 (RBstart=0)

5

27.1

NOTE 2

UL2/DL1

direct-hit

n2

n48

10

15

50 (RBstart=0)

1007

13.8

NOTE 2

UL2/DL1

direct-hit

n2

n48

5

15

25 (RBstart=0)

10

1.9

NOTE 6

UL2/DL1

near-miss

n2

n77

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n2

n77

10

15

50 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n2

n77

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n2

n78

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n2

n78

10

15

50 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n2

n78

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n3

n77

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n3

n77

10

15

50 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n3

n77

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n3

n78

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n3

n78

10

15

50 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n3

n78

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n5

n778

5

15

16 (RBstart=0)

10

10.5

NOTE 4

UL4/DL1

direct-hit

n5

n778

5

15

25 (RBstart=0)

100

1.4

NOTE 4

UL4/DL1

direct-hit

n5

n778

5

15

16 (RBstart=0)

10

10.4

NOTE 5

UL5/DL1

direct-hit

n5

n778

5

15

25 (RBstart=0)

100

0.7

NOTE 5

UL5/DL1

direct-hit

n5

n78

5

15

16 (RBstart=0)

10

10.5

NOTE 4

UL4/DL1

direct-hit

n5

n78

5

15

25 (RBstart=0)

100

1.4

NOTE 4

UL4/DL1

direct-hit

n8

n313

N/A

N/A

N/A

N/A

N/A

NOTE 2

UL2/DL1

direct-hit

n8

n7

5

15

8 (RBstart=0)

5

10

NOTE 3

UL3/DL1

direct-hit

n8

n7

5

15

25 (RBstart=0)

50

1.1

NOTE 3

UL3/DL1

direct-hit

n8

n41

5

15

16 (RBstart=0)

10

13

NOTE 3

UL3/DL1

direct-hit

n8

n41

5

15

25 (RBstart=0)

100

3.5

NOTE 3

UL3/DL1

direct-hit

n8

n77

5

15

16 (RBstart=0)

10

10.8

NOTE 4

UL4/DL1

direct-hit

n8

n77

5

15

25 (RBstart=0)

100

1.4

NOTE 4

UL4/DL1

direct-hit

n8

n78

5

15

16 (RBstart=0)

10

10.8

NOTE 4

UL4/DL1

direct-hit

n8

n78

5

15

25 (RBstart=0)

100

1.4

NOTE 4

UL4/DL1

direct-hit

n8

n79

5

15

16 (RBstart=0)

10

12.0

NOTE 5

UL5/DL1

direct-hit

n8

n79

5

15

25 (RBstart=0)

100

4.4

NOTE 5

UL5/DL1

direct-hit

n12

n48

5

15

10 (RBstart=0)

10

10.4

NOTE 5

UL5/DL1

direct-hit

n12

n48

5

15

25 (RBstart=0)

40

4.7

NOTE 5

UL5/DL1

direct-hit

n12

n66

5

15

8 (RBstart=0)

10

10

NOTE 3

UL3/DL1

direct-hit

n12

n66

5

15

20 (RBstart=0)

40

2.4

NOTE 3

UL3/DL1

direct-hit

n12

n77

5

15

10 (RBstart=0)

10

10.4

NOTE 5

UL5/DL1

direct-hit

n12

n77

5

15

20 (RBstart=0)

100

0.7

NOTE 5

UL5/DL1

direct-hit

n13

n77

5

15

10 (RBstart=0)

10

10.4

NOTE 5

UL5/DL1

direct-hit

n13

n77

5

15

20 (RBstart=0)

100

0.7

NOTE 5

UL5/DL1

direct-hit

n14

n77

5

15

10 (RBstart=0)

10

10.4

NOTE 5

UL5/DL1

direct-hit

n14

n77

5

15

20 (RBstart=0)

100

0.7

NOTE 5

UL5/DL1

direct-hit

n18

n77

5

15

16 (RBstart=0)

10

10.4

NOTE 5

UL5/DL1

direct-hit

n18

n77

5

15

25 (RBstart=0)

100

0.7

NOTE 5

UL5/DL1

direct-hit

n20

n78

5

15

16 (RBstart=0)

10

10.8

NOTE 4

UL4/DL1

direct-hit

n20

n78

5

15

25 (RBstart=0)

100

1.4

NOTE 4

UL4/DL1

direct-hit

n24

n7712

N/A

N/A

N/A

N/A

N/A

NOTE 2

UL2/DL1

direct-hit

n24

n7712

N/A

N/A

N/A

N/A

N/A

NOTE 2

UL2/DL1

direct-hit

n25

n48

5

15

25 (RBstart=0)

10

1.9

NOTE 6

UL2/DL1

near-miss

n25

n77

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n25

n77

10

15

50 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n25

n77

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n25

n78

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n25

n78

10

15

50 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n25

n78

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n28

n1

5

15

8 (RBstart=0)

5

10.2

NOTE 3

UL3/DL1

direct-hit

n28

n1

5

15

25 (RBstart=0)

50

1.1

NOTE 3

UL3/DL1

direct-hit

n28

n50

5

15

12 (RBstart=0)

5

23.0

NOTE 2

UL2/DL1

direct-hit

n28

n50

5

15

25 (RBstart=0)

80

10.8

NOTE 2

UL2/DL1

direct-hit

n28

n74

5

15

12 (RBstart=0)

5

23.1

NOTE 2

UL2/DL1

direct-hit

n28

n74

5

15

25 (RBstart=0)

20

16.8

NOTE 2

UL2/DL1

direct-hit

n28

n75

5

15

12 (RBstart=0)

5

28.1

NOTE 2

UL2/DL1

direct-hit

n28

n75

10

15

50 (RBstart=0)

50

18.7

NOTE 2

UL2/DL1

direct-hit

n28

n77

5

15

10 (RBstart=0)

10

10.4

NOTE 5

UL5/DL1

direct-hit

n28

n77

5

15

25 (RBstart=0)

100

0.7

NOTE 5

UL5/DL1

direct-hit

n28

n78

5

15

10 (RBstart=0)

10

10.4

NOTE 5

UL5/DL1

direct-hit

n28

n78

5

15

25 (RBstart=0)

100

0.7

NOTE 5

UL5/DL1

direct-hit

n66

n48

5

15

12 (RBstart=0)

5

27.1

NOTE 2

UL2/DL1

direct-hit

n66

n48

40

15

200 (RBstart=0)

1007

13.8

NOTE 2

UL2/DL1

direct-hit

n66

n48

5

15

12 (RBstart=0)

10

1.9

NOTE 6

UL2/DL1

near-miss

n66

n77

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n66

n77

20

15

100 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n66

n77

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n66

n78

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n66

n78

20

15

100 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n66

n78

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n70

n78

5

15

25 (RBstart=0)

10

23.9

NOTE 2

UL2/DL1

direct-hit

n70

n78

10

15

50 (RBstart=0)

100

13.8

NOTE 2

UL2/DL1

direct-hit

n70

n78

5

15

25 (RBstart=0)

10

1.1

NOTE 6

UL2/DL1

near-miss

n71

n2510,11

5

15

8 (RBstart=0)

10

10

NOTE 3

UL3/DL1

direct-hit

n71

n2510,11

5

15

8 (RBstart=0)

40

2.1

NOTE 3

UL3/DL1

direct-hit

n71

n41

5

15

16 (RBstart=0)

10

10.8

NOTE 4

UL4/DL1

direct-hit

n71

n41

5

15

25 (RBstart=0)

100

1.4

NOTE 4

UL4/DL1

direct-hit

n71

n70

5

15

8 (RBstart=0)

5

9.9

NOTE 3

UL3/DL1

direct-hit

n71

n70

5

15

20 (RBstart=0)

25

4.1

NOTE 3

UL3/DL1

direct-hit

n92

n78

5

15

16 (RBstart=0)

10

10.8

NOTE 4

UL4/DL1

direct-hit

n92

n78

5

15

25 (RBstart=0)

100

1.0

NOTE 4

UL4/DL1

direct-hit

NOTE 1: These requirements apply when there is at least one individual RE within the uplink transmission bandwidth of the aggressor (lower) band for which the 2nd / 3rd / 4th / 5th transmitter harmonic is within the downlink transmission bandwidth of a victim (higher) band.

NOTE 2: The requirements should be verified for UL NR ARFCN of the aggressor (lower) band (superscript LB) such that in MHz and with carrier frequency in the victim (higher) band in MHz and the channel bandwidth configured in the lower band.

NOTE 3: The requirements should be verified for UL NR ARFCN of the aggressor (lower) band (superscript LB) such that in MHz and with the carrier frequency in the victim (higher) band in MHz and the channel bandwidth configured in the low band.

NOTE 4: The requirements should be verified for UL EARFCN of the aggressor (lower) band (superscript LB) such that in MHz and with carrier frequency in the victim (higher) band in MHz and the channel bandwidth configured in the lower band.

NOTE 5: The requirements should be verified for UL NR-ARFCN of the aggressor (lower) band (superscript LB) such that in MHz and with carrier frequency in the victim (higher) band in MHz and the channel bandwidth configured in the lower band.

NOTE 6: The requirements are only applicable to channel bandwidths no larger than 20 MHz and with a carrier frequency at MHz offset from in the victim (higher band) with , whereandare the channel bandwidths configured in the aggressor (lower) and victim (higher) bands in MHz, respectively.

NOTE 7: For these bandwidths, the minimum requirements are restricted to operation when carrier is configured as a downlink carrier part of CA configuration.

NOTE 8: For a UE which supports this band combination only when the Band n77 frequency range restriction defined in NOTE 12 of Table 5.2-1 applies, the MSD test point(s) cannot be verified for the band combination and the test point(s) can be skipped.

NOTE 9: Void.

NOTE 10: These requirements apply when the lower edge frequency of the 10 MHz, 15 MHz, or 20 MHz uplink channel in Band 71 is located at or below 668 MHz and the downlink channel in Band n25 is located with its upper edge at 1995 MHz.

NOTE 11: These requirements apply when the lower edge frequency of the uplink channel in Band n71 is located at or below 668 MHz and the downlink channel in Band n25 is located with its upper edge at 1990 MHz.

NOTE 12: In the USA, n77 band is restricted to 3450 – 3550 MHz and 3700 – 3980 MHz. There is no UL harmonic due to n24 UL in downlink for n77 operating in 3450 – 3550 MHz and 3700 – 3980 MHz.

NOTE 13: No requirements apply when there is at least one individual RE within the uplink transmission bandwidth of the low band for which the 2nd transmitter harmonic is within the downlink transmission bandwidth of the high band. The reference sensitivity for all active downlink component carriers is only verified when this is not the case (the requirements specified in clause 7.3.2 apply unless otherwise specified).

Table 7.3A.4-1a: NR-U reference sensitivity measurement exclusion region in MHz.

NR Band / Harmonic order / Channel BW in UL

Band

Harmonic order

5MHz

10MHz

15MHz

20 MHz

25 MHz

30 MHz

40MHz

50 MHz

n7

2

+/- 10

+/- 20

+/- 30

+/- 40

+/- 50

+/- 60

+/- 80

+/- 100

n25

3

+/- 15

+/- 23

+/- 35

+/- 45

+/- 90

n66

3

+/- 15

+/- 23

+/- 35

+/- 45

+/- 90

n48

2

+/- 10

+/- 20

+/- 30

+/- 40

+/- 80

NOTE 1: Even though UL harmonic does not fall directly into NR-U band the exclusion region still applies.

NOTE 2: The center of the exclusion region is obtained by multiplying the UL channel center frequency by the harmonic order.

Table 7.3A.4-2: VoidTable 7.3A.4-3: Void

Table 7.3A.4-3a: Void

Sensitivity degradation is allowed for different combinations of UL configurations and DL channel bandwidths if a band is impacted by receiver harmonic mixing due to another band part which belongs to PC3 NR band or PC2 NR band of the same CA configuration. Reference sensitivity exceptions and uplink/downlink configurations due to harmonic mixing from a PC3 aggressor NR UL band for either PC3 or PC2 CA are specified in Table 7.3A.4-4 and from a PC2 aggressor NR UL band for PC2 CA are specified in Table 7.3A.4-4a.For these exceptions, only the listed test points in Table 7.3A.4-4, Table 7.3A.4-4a and Table 7.3A.4-4b are needed to be tested.

Table 7.3A.4-4: Reference sensitivity exceptions and uplink/downlink configurations due to harmonic mixing from a PC3 aggressor NR UL band for DL NR CA FR1

UL band

DL band

UL BW

SCS of UL band

UL RB Allocation

DL BW

MSD

UL/DL fc condition

UL/DL harmonic order

(MHz)

(kHz)

LCRB

(MHz)

(dB)

n25

n713

5

15

25 (RBstart=0)

5

26.5

NOTE 4

UL1/DL3

n25

n713

20

15

100 (RBstart=0)

20

13.5

NOTE 4

UL1/DL3

n40

n20

5

15

25 (RBstart=0)

5

27.8

NOTE 4

UL1/DL3

n40

n20

20

15

100 (RBstart=0)

20

20.3

NOTE 4

UL1/DL3

n40

n28

5

15

25 (RBstart=0)

5

37.8

NOTE 4

UL1/DL3

n40

n28

20

15

100 (RBstart=0)

20

30.3

NOTE 4

UL1/DL3

n40

n77

10

30

24 (RBstart=0)

10

8.3

NOTE 1

UL3/DL2

n40

n77

10

30

24 (RBstart=0)

100

0.4

NOTE 1

UL3/DL2

n40

n78

10

30

24 (RBstart=0)

10

8.3

NOTE 1

UL3/DL2

n40

n78

10

30

24 (RBstart=0)

100

0.4

NOTE 1

UL3/DL2

n41

n183

5

15

25 (RBstart=0)

5

24.3

NOTE 4

UL1/DL3

n41

n183

15

15

75 (RBstart=0)

15

22.5

NOTE 4

UL1/DL3

n41

n48

10

30

24 (RBstart=0)

10

8.3

NOTE 1

UL3/DL2

n41

n48

10

30

24 (RBstart=0)

100

0.4

NOTE 1

UL3/DL2

n41

n78

10

30

24 (RBstart=0)

10

8.3

NOTE 1

UL3/DL2

n41

n78

10

30

24 (RBstart=0)

100

0.4

NOTE 1

UL3/DL2

n46

n7

5

15

12 (RBstart=0)

5

8.3

NOTE 1

UL3/DL2

n46

n7

5

15

24 (RBstart=0)

50

0.6

NOTE 1

UL3/DL2

n46

n48

5

15

12 (RBstart=0)

5

22.6

NOTE 1

UL3/DL2

n46

n48

20

15

100 (RBstart=0)

100

12

NOTE 1

UL3/DL2

n46

n78

5

15

25 (RBstart=0)

10

19.5

NOTE 1

UL3/DL2

n46

n78

20

15

100 (RBstart=0)

100

12

NOTE 1

UL3/DL2

n77

n2

10

15

25 (RBstart=0)

5

6.7

NOTE 7

UL1/DL2

n77

n2

20

15

100 (RBstart=0)

20

3,7

NOTE 7

UL1/DL2

n77

n5

5

15

25 (RBstart=0)

5

5.7

NOTE 8

UL1/DL4

n77

n5

20

15

100 (RBstart=0)

20

2.7

NOTE 8

UL1/DL4

n77

n12

10

15

25 (RBstart=0)

5

31

NOTE 5

UL1/DL5

n77

n12

15

15

75 (RBstart=0)

15

26.2

NOTE 5

UL1/DL5

n77

n13

10

15

25 (RBstart=0)

5

31

NOTE 5

UL1/DL5

n77

n13

10

15

50 (RBstart=0)

10

28

NOTE 5

UL1/DL5

n77

n14

10

15

25 (RBstart=0)

5

31

NOTE 5

UL1/DL5

n77

n14

10

15

50 (RBstart=0)

10

28

NOTE 5

UL1/DL5

n77

n25

10

15

25 (RBstart=0)

5

6.7

NOTE 7

UL1/DL2

n77

n25

20

15

100 (RBstart=0)

40

1.1

NOTE 7

UL1/DL2

n776

n29

10

15

25 (RBstart=0)

5

31

NOTE 5

UL1/DL5

n776

n29

10

15

50 (RBstart=0)

10

28

NOTE 5

UL1/DL5

n77

n30

10

15

12 (RBstart=0)

5

10.4

NOTE 2

UL2/DL3

n77

n30

10

15

24 (RBstart=0)

10

8.0

NOTE 2

UL2/DL3

n77

n40

20

30

50 (RBstart=0)

10

10.4

NOTE 2

UL2/DL3

n77

n40

20

30

50 (RBstart=0)

100

0.9

NOTE 2

UL2/DL3

n77

n41

20

30

50 (RBstart=0)

10

10.4

NOTE 2

UL2/DL3

n77

n41

20

30

50 (RBstart=0)

100

6.3

NOTE 2

UL2/DL3

n78

n40

20

30

50 (RBstart=0)

5

10.4

NOTE 2

UL2/DL3

n78

n40

20

30

50 (RBstart=0)

80

4.5

NOTE 2

UL2/DL3

n78

n41

20

30

50 (RBstart=0)

10

10.4

NOTE 2

UL2/DL3

n78

n41

20

30

50 (RBstart=0)

100

6.3

NOTE 2

UL2/DL3

n96

n48

5

15

25 (RBstart=0)

5

5.8

NOTE 2

UL2/DL3

n96

n48

20

15

100 (RBstart=0)

100

0.5

NOTE 2

UL2/DL3

NOTE 1: The requirements should be verified for UL NR-ARFCN of the aggressor (lower) band (superscript LB) such that in MHz and with carrier frequency in the victim (higher) band in MHz and the channel bandwidth configured in the lower band.

NOTE 2: The requirements should be verified for UL NR-ARFCN of the aggressor (high) band (superscript HB) such that in MHz and with carrier frequency in the victim (lower) band in MHz and the channel bandwidth configured in the higher band.

NOTE 3: These requirements apply when there is at least one individual RE within the downlink transmission bandwidth of the victim (lower) band for which the 3rd harmonic is within the uplink transmission bandwidth or the uplink adjacent channel’s transmission bandwidth of an aggressor (higher) band.

NOTE 4: The requirements should be verified for UL NR-ARFCN of the aggressor (higher) band (superscript HB) such that in MHz and with  the carrier frequency in the victim (lower) band and  the channel bandwidth configured in the higher band.

NOTE 5: The requirements should be verified for DL EARFCN of the victim (lower) band (superscript LB) such that with the DL carrier frequency in the lower band and the UL carrier frequency in the higher band, both in MHz.

NOTE 6: For a UE which supports this band combination only when the Band n77 frequency range restriction defined in NOTE 12 of Table 5.2-1 applies, the MSD test point(s) cannot be verified for the band combination and the test point(s) can be skipped.

NOTE 7: The requirements should be verified for UL NR-ARFCN of the aggressor (higher) band (superscript HB) such that in MHz and with  the carrier frequency in the victim (lower) band and  the channel bandwidth configured in the higher band.

NOTE 8: The requirements should be verified for UL NR-ARFCN of the aggressor (higher) band (superscript HB) such that in MHz and with  the carrier frequency in the victim (lower) band and  the channel bandwidth configured in the higher band.

Table 7.3A.4-4a: Reference sensitivity exceptions and uplink/downlink configurations due to harmonic mixing from a PC2 aggressor NR UL band for NR DL CA FR1

UL band

DL band

UL BW

SCS of UL band

UL RB Allocation

DL BW

MSD

UL/DL fc condition

UL/DL harmonic order

(MHz)

(kHz)

LCRB

(MHz)

(dB)

n77

n2

10

15

25 (RBstart=0)

5

9.1

NOTE 4

UL1/DL2

n77

n2

20

15

100 (RBstart=0)

20

6.7

NOTE 4

UL1/DL2

n77

n5

10

15

25 (RBstart=0)

5

8.1

NOTE 5

UL1/DL4

n77

n5

20

15

20 (RBstart=0)

20

4.3

NOTE 5

UL1/DL4

n77

n12

10

15

25 (RBstart=0)

5

34

NOTE 1

UL1/DL5

n77

n12

15

15

75 (RBstart=0)

15

29.2

NOTE 1

UL1/DL5

n77

n13

10

15

25 (RBstart=0)

5

34

NOTE 1

UL1/DL5

n77

n13

10

15

50 (RBstart=0)

10

31

NOTE 1

UL1/DL5

n77

n14

10

15

25 (RBstart=0)

5

34

NOTE 1

UL1/DL5

n77

n14

10

15

50 (RBstart=0)

10

31

NOTE 1

UL1/DL5

n77

n25

10

15

25 (RBstart=0)

5

9.2

NOTE 4

UL1/DL2

n77

n25

20

15

100 (RBstart=0)

40

2.0

NOTE 4

UL1/DL2

n772

n29

10

15

25 (RBstart=0)

5

34

NOTE 1

UL1/DL5

n772

n29

10

15

50 (RBstart=0)

10

31

NOTE 1

UL1/DL5

n77

n30

10

15

12 (RBstart=0)

5

13.2

NOTE 3

UL2/DL3

n77

n30

10

15

25 (RBstart=0)

10

10.6

NOTE 3

UL2/DL3

n77

n41

20

30

50 (RBstart=0)

10

13.2

NOTE 3

UL2/DL3

n77

n41

20

30

50 (RBstart=0)

100

8.8

NOTE 3

UL2/DL3

n78

n3

5

15

25 (RBstart=0)

5

8.1

NOTE 4

UL1/DL2

n78

n3

40

15

216 (RBstart=0)

40

1

NOTE 4

UL1/DL2

n78

n28

5

15

25 (RBstart=0)

5

31

NOTE 1

UL1/DL5

n78

n28

30

15

160 (RBstart=0)

30

11.7

NOTE 1

UL1/DL5

NOTE 1: The requirements should be verified for DL EARFCN of the victim (lower) band (superscript LB) such that with the DL carrier frequency in the lower band and the UL carrier frequency in the higher band, both in MHz.

NOTE 2: For a UE which supports this band combination only when the Band n77 frequency range restriction defined in NOTE 12 of Table 5.2-1 from TS 38.101-1 applies, the MSD test point(s) cannot be verified for the band combination and the test point(s) can be skipped.

NOTE 3: The requirements should be verified for UL NR-ARFCN of the aggressor (high) band (superscript HB) such that in MHz and with carrier frequency in the victim (lower) band in MHz and the channel bandwidth configured in the higher band.

NOTE 4: The requirements should be verified for UL NR-ARFCN of the aggressor (higher) band (superscript HB) such that in MHz and with  the carrier frequency in the victim (lower) band and  the channel bandwidth configured in the higher band.

NOTE 5: The requirements should be verified for UL NR-ARFCN of the aggressor (higher) band (superscript HB) such that in MHz and with  the carrier frequency in the victim (lower) band and  the channel bandwidth configured in the higher band.

Table 7.3A.4-4b: Reference sensitivity exceptions and uplink/downlink configurations due to harmonic mixing from a PC1.5 NR UL band for NR DL CA FR1

UL band

DL band

UL BW

SCS of UL band

UL RB Allocation

DL BW

MSD

UL/DL fc condition

UL/DL harmonic order

(MHz)

(kHz)

LCRB

(MHz)

(dB)

n77

n2

10

15

25 (RBstart=0)

5

11.8

NOTE 4

UL1/DL2

n77

n2

20

15

100 (RBstart=0)

20

9.2

NOTE 4

UL1/DL2

n77

n5

10

15

25 (RBstart=0)

5

10.7

NOTE 5

UL1/DL4

n77

n5

20

15

20 (RBstart=0)

20

6.4

NOTE 5

UL1/DL4

n77

n12

10

15

25 (RBstart=0)

5

37

NOTE 1

UL1/DL5

n77

n12

15

15

75 (RBstart=0)

15

32.2

NOTE 1

UL1/DL5

n77

n13

10

15

25 (RBstart=0)

5

37

NOTE 1

UL1/DL5

n77

n13

10

15

50 (RBstart=0)

10

34

NOTE 1

UL1/DL5

n77

n14

10

15

25 (RBstart=0)

5

37

NOTE 1

UL1/DL5

n77

n14

10

15

50 (RBstart=0)

10

34

NOTE 1

UL1/DL5

n77

n25

10

15

25 (RBstart=0)

5

11.9

NOTE 4

UL1/DL2

n77

n25

20

15

100 (RBstart=0)

40

3.3

NOTE 4

UL1/DL2

n77

n29

10

15

25 (RBstart=0)

5

37

NOTE 1

UL1/DL5

n77

n29

10

15

50 (RBstart=0)

10

34

NOTE 1

UL1/DL5

n77

n30

10

15

12 (RBstart=0)

5

16.1

NOTE 3

UL2/DL3

n77

n30

10

15

25 (RBstart=0)

10

13.5

NOTE 3

UL2/DL3

n77

n41

20

30

50 (RBstart=0)

10

16.1

NOTE 3

UL2/DL3

n77

n41

20

30

50 (RBstart=0)

100

11.5

NOTE 3

UL2/DL3

NOTE 1: The requirements should be verified for DL EARFCN of the victim (lower) band (superscript LB) such that with the DL carrier frequency in the lower band and the UL carrier frequency in the higher band, both in MHz.

NOTE 2: For a UE which supports this band combination only when the Band n77 frequency range restriction defined in NOTE 12 of Table 5.2-1 from TS 38.101-1 applies, the MSD test point(s) cannot be verified for the band combination and the test point(s) can be skipped.

NOTE 3: The requirements should be verified for UL NR-ARFCN of the aggressor (high) band (superscript HB) such that in MHz and with carrier frequency in the victim (lower) band in MHz and the channel bandwidth configured in the higher band.

NOTE 4: The requirements should be verified for UL NR-ARFCN of the aggressor (higher) band (superscript HB) such that in MHz and with  the carrier frequency in the victim (lower) band and  the channel bandwidth configured in the higher band.

NOTE 5: The requirements should be verified for UL NR-ARFCN of the aggressor (higher) band (superscript HB) such that in MHz and with  the carrier frequency in the victim (lower) band and  the channel bandwidth configured in the higher band.

Table 7.3A.4-5: Void