Foreword1 Scope2 References3 Definitions, symbols and abbreviations4 General5 Operating bands and channel arrangement5.1 General5.2 Operating bands5.2A Operating bands for CA5.2B Operating bands for DC5.2C Operating band combination for SUL5.2D Operating bands for UL MIMO5.2E Operating band for V2X5.3 UE channel bandwidth5.3A UE channel bandwidth for CA5.3E Channel bandwidth for V2X5.3I Channel bandwidth for RedCap5.4 Channel arrangement5.4A Channel arrangement for CA5.4B Reserved5.4C Reserved5.4D Reserved5.4E Channel arrangement for V2X5.5 Void5.5A Configurations for CA5.5A.0 General5.5A.1 Configurations for intra-band contiguous CA5.5A.2 Configurations for intra-band non-contiguous CA5.5A.3 Configurations for inter-band CA5.5B Configurations for DC5.5C Configurations for SUL6 Transmitter characteristics6.1 General6.1A General6.1F General6.2 Transmitter power6.2A Transmitter power for CA6.2B Transmitter power for NR-DC6.2C Transmitter power for SUL6.2D Transmitter power for UL MIMO6.2E Transmitter power for V2X6.2F Transmitter power for shared spectrum channel access6.2G Transmitter power for Tx Diversity6.2H Transmitter power for CA with UL MIMO6.2I Transmitter power for RedCap6.3 Output power dynamics6.3.1 Minimum output power6.3.2 Transmit OFF power6.3.3 Transmit ON/OFF time mask6.3.4 Power control6.3A Output power dynamics for CA6.3B Output power dynamics for NR-DC6.3C Output power dynamics for SUL6.3D Output power dynamics for UL MIMO6.3E Output power dynamics for V2X6.3F Output power dynamics for shared spectrum channel access6.3G Output power dynamics for Tx Diversity6.3H Output power dynamics for CA with UL MIMO6.4 Transmit signal quality6.4A Transmit signal quality for CA6.4B Transmit signal quality for NR-DC6.4D Transmit signal quality for UL MIMO6.4E Transmit signal quality for V2X6.4F Transmit signal quality for shared spectrum channel access6.4G Transmit signal quality for Tx Diversity6.4H Transmit signal quality for CA with UL MIMO6.5 Output RF spectrum emissions6.5A Output RF spectrum emissions for CA6.5B Output RF spectrum emissions for NR-DC6.5D Output RF spectrum emissions for UL MIMO6.5E Output RF spectrum emissions for V2X6.5F Output RF spectrum emissions6.5G Output RF spectrum emissions for Tx Diversity6.5H Output RF spectrum emissions for CA with UL MIMO6.6 Void6.6E Time alignment error7 Receiver characteristics7.1 General7.1A General7.1F General7.1I General7.2 Diversity characteristics7.3 Reference sensitivity7.3A Reference sensitivity for CA7.3A.1 General7.3A.2 Reference sensitivity power level for CA7.3A.3 ΔRIB,c for CA7.3A.4 Reference sensitivity exceptions due to UL harmonic interference for CA7.3A.5 Reference sensitivity exceptions due to intermodulation interference due to 2UL CA7.3A.6 Reference sensitivity exceptions due to cross band isolation for CA7.3B Reference sensitivity for NR-DC7.3C Reference sensitivity for SUL7.3D Reference sensitivity for UL MIMO7.3E Reference sensitivity for V2X7.3F Reference sensitivity for shared spectrum channel access7.3G Reference sensitivity for Tx Diversity7.3I Reference sensitivity for RedCap7.4 Maximum input level7.4A Maximum input level for CA7.4B Maximum input level for NR-DC7.4D Maximum input level for UL MIMO7.4E Maximum input level for V2X7.5 Adjacent channel selectivity7.5A Adjacent channel selectivity for CA7.5B Adjacent channel selectivity for NR-DC7.5D Adjacent channel selectivity for UL MIMO7.5E Adjacent channel selectivity for V2X7.5F Adjacent channel selectivity7.6 Blocking characteristics7.6A Blocking characteristics for CA7.6B Blocking characteristics for NR-DC7.6C Blocking characteristics for SUL7.6D Blocking characteristics for UL MIMO7.6E Blocking characteristics for V2X7.6F Blocking characteristics7.7 Spurious response7.7A Spurious response for CA7.7B Spurious response for NR-DC7.7D Spurious response for UL MIMO7.7E Spurious response for V2X7.7F Spurious response for shared spectrum channel access7.8 Intermodulation characteristics7.8A Intermodulation characteristics for CA7.8B Intermodulation characteristics for NR-DC7.8D Intermodulation characteristics for UL MIMO7.8E Intermodulation characteristics for V2X7.8F Intermodulation characteristics for shared spectrum channel access7.9 Spurious emissions7.9A Spurious emissions for CA7.9B Spurious emissions for NR-DCA.1 GeneralA.2 UL reference measurement channelsA.3 DL reference measurement channelsA.4 CSI reference measurement channelsA.5 OFDMA Channel Noise Generator (OCNG)A.6 VoidA.7 V2X reference measurement channelsC.1 GeneralC.2 SetupC.3 ConnectionD.1 GeneralD.2 Interference signalsE.1 GeneralE.2 EnvironmentalF.0 GeneralF.1 Measurement PointF.2 Basic Error Vector Magnitude measurementF.3 Basic in-band emissions measurementF.4 Modified signal under testF.5 Window lengthF.6 Averaged EVMF.7 Spectrum FlatnessF.8 EVM measurement for dual TxF.9 Phase offset measurement for DMRS bundlingG.0 GeneralG.1 Measurement PointG.2 Relative Phase Error MeasurementL.1 Indication of modified MPR behavior 5.4D Reserved 38.101-13GPPNRPart 1: Range 1 StandaloneRelease 17TSUser Equipment (UE) radio transmission and reception Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM