5.5A.1 Configurations for intra-band contiguous CA

38.101-13GPPNRPart 1: Range 1 StandaloneRelease 17TSUser Equipment (UE) radio transmission and reception

Tools: ARFCN - Frequency Conversion for 5G NR/LTE/UMTS/GSM

Power class 3 is supported for all uplinks. Power classes other than power class 3 are supported as indicated in Table 5.5A.1-1.

Table 5.5A.1-1: NR CA configurations and bandwidth combination sets defined for intra-band contiguous CA

NR CA configuration / Bandwidth combination set
NR CA configuration	Uplink CA configurations or single uplink carrier⁵	Channel bandwidths for carrier (MHz)	Channel bandwidths for carrier (MHz)	Channel bandwidths for carrier (MHz)	Channel bandwidths for carrier (MHz)	Channel bandwidths for carrier (MHz)	Maximum aggregated bandwidth (MHz)	Bandwidth combination set
CA_n1B	–	10	10,15				40	0
		15	15,20
		20	20
CA_n2B	–	5	15				20	0
		10	10
CA_n3B	–	5	15, 20, 25, 30				60	0
		10	10, 15, 20, 25, 30
		15, 20, 25, 30	5, 10, 15, 20, 25, 30
CA_n5B	CA_n5B	5, 10, 15	5, 10, 15				20	0
CA_n7B	CA_n7B	10	10, 15, 20, 30, 40				50	0
		15	15, 20, 30
		20	20, 30
CA_n25B	–	5	15				20	0
		10	10
CA_n38B	–	5	15, 20, 25				50	0
		10	10, 15, 20, 25
		15, 20, 25	5, 10, 15, 20, 25
CA_n40B	–	20	80				100	0
		50	50
	CA_n40B	10,15, 20, 30, 40, 50, 60, 80	10, 15, 20, 30, 40, 50, 60, 80				100	1
CA_n41B	CA_n41B	10, 20, 30, 40, 50	10, 20, 30, 40, 50				100	0
CA_n41C	n41^3,4 CA_n41C³	40	80, 100				180	0
		50, 60, 80	60, 80, 100
		10	100				190	1
		15, 20	90, 100
		40	80, 90, 100
		50, 60, 80, 90	60, 80, 90, 100
		10	100				190	2
		15, 20	90, 100
		30, 40	80, 90, 100
		50, 60, 80, 90	60, 80, 90, 100
		See n41 channel bandwidths in Table 5.3.5-1 for each carrier²					190	4 and 5
CA_n46B	–	20, 40, 60	20, 40				100	0
CA_n46C	–	60, 80	60, 80				160	0
CA_n46D	–	60, 80	80	80			240	0
CA_n46M	–	20, 40, 60	20, 40	20, 40			140	0
CA_n46N	–	20, 40, 80	20, 40	20, 40	20, 40		200	0
CA_n46O	–	20, 60	20, 40	20, 40	20, 40	20, 40	220	0
CA_n48B	CA_n48B	5	15, 20				40	0
		10, 15, 20	10, 15, 20
		15, 20	15, 20
	–	10	50, 60, 80, 90				100	1
		15, 20	40, 50, 60, 80
		40	40, 50, 60
	–	10, 15, 20, 30, 40	10, 15, 20, 30, 40, 50, 60, 70, 80, 90				100	2
CA_n48C	–	10	100				140	0
		15	90,100
		20	90, 100
		40	80, 90, 100
	–	10, 15, 20, 30, 40	70, 80, 90, 100				140	1
CA_n66B	–	5¹	20, 40				50	0
		10	15, 20, 40
		15	15, 20
CA_n71B	–	5	20				25	0
		10	15
		10	20				35	1
		15	15, 20
		5, 10, 15	15, 20				35	2
		See n71 channel bandwidths in Table 5.3.5-1 for each carrier²					35	4 and 5
CA_n77B	–	20	25, 30, 40				60	0
		25	30
CA_n77C	CA_n77C	50	60, 80, 100				200	0
		60	60, 80, 100
		80	80, 100
		100	100
		10	100				200	1
		15, 20	90, 100
		25, 30	80, 90, 100
		40	70, 80, 90, 100
		50, 60, 70, 80, 90, 100	60, 70, 80, 90, 100
CA_n77D	–	100	100	100			300	0
CA_n78B	–	20	50				70	0
CA_n78C	CA_n78C	50	60, 80, 100				200	0
		60	60, 80, 100
		80	80, 100
		100	100
		10	100				200	1
		15, 20	90, 100
		25, 30	80, 90, 100
		40	70, 80, 90, 100
		50, 60, 70, 80, 90, 100	60, 70, 80, 90, 100
CA_n78D	–	100	100	100			300	0
CA_n79C	CA_n79C	50	60, 80, 100				200	0
		60	60, 80, 100
		80	80, 100
		100	100
CA_n79D	–	100	100	100			300	0
CA_n96B	CA_n96B	20, 40	20, 40, 60, 80				100	0
CA_n96C	CA_n96C	80	40, 60, 80				160	0
CA_n96D		80	80	60, 80			240	0
CA_n96E		80	80	80	80		320	0
NOTE 1: 5 MHz is not applicable for 30/60 kHz SCS. NOTE 2: The aggregated bandwidth must be greater than or equal to the minimum for the bandwidth class defined in Table 5.3A.5-1, and smaller than or equal to the maximum aggregated bandwidth. NOTE 3: Power Class 2 is allowed for this uplink combination or single uplink carrier in this downlink/uplink combination NOTE 4: Power Class 1.5 is allowed for this uplink combination or single uplink carrier in this downlink/uplink combination NOTE 5: Only single uplink carriers with power class other than PC3 are listed.

Table 5.5A.1-2: Void